• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.629-635
• /
• 2017

Free-Flooded Ring (FFR) transducer array for use in Sonar system can be driven with large amplitude in a wide frequency band due to its structural characteristics, in which two resonances of a ring mode (1st radial mode) and an inner cavity vibration mode occur in a low frequency band. Since its sound wave generation characteristics are not influenced by the water pressure, the FFR transducer array is widely used in the deep sea. So FFR has been recognized as a low-frequency active sound source and has received much attention ever since. In order to utilize the FFR transducer array for SONAR systems in military and industrial applications, its equivalent electric circuit model is necessary especially to design the matching circuit between the driving power amplifier and the FFR transducer array. Thus this paper proposes the equivalent electric circuit model of FFR transducer array by using measured values of parameter, and suggest the improved method of parameter identification. Finally it verifies the effectiveness of the proposed circuit model of FFR transducer array by experimental measurements.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.628-630
• /
• 2017

관상동맥의 협착 병변의 위험성을 치료 및 예방하기 위하여 FFR(Fractional flow reserve)이라는 지표를 사용한다. 기존의 임상에서 FFR을 측정하기 위하여 침습적인 방법을 이용하여 진행하였다. 이러한 침습적 방법은 부작용의 위험성을 가지고 있기 때문에 컴퓨터 시뮬레이션을 통해 계산하면 위험성을 해소할 수 있다. 하지만 현재 컴퓨터 시뮬레이션은 CT image를 이용하기 때문에 칼슘을 정확히 구별하거나 지질의 위치 등을 확인하는 것이 어렵기 때문에 FFR 결과에 오류를 발생시킬 수도 있고, 또한 전체 관상동맥을 해석하기 때문에 많은 계산량이 필요하다. 본 연구에서는 최근 높은 해상도를 가진 OCT(Optical Coherence Tomography)를 이용하여 이러한 한계점을 극복하고자 하고, 임상에서 측정한 FFR과 OCT에서 측정된 FFR은 비교하는 것이 목적이다.

• Journal of Integrative Natural Science
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2020

This paper proposes a novel fractional frequency reuse(FFR) based on dynamic user distribution. In the FFR, a macro cell is divided into two regions, i.e., the inner region(IR) and outer region(OR). The criterion for dividing the IR and OR is the distance ratio of the radius. However, these distance-based criteria are uncertain in measuring user performance. This is because there are various attenuation phenomena such as shadowing and wall penetration as well as path loss. Therefore, we propose a novel FFR based on dynamic user classification with signal to interference plus noise ratio(SINR) of macro users and classify the FFR into two regions newly. Simulation results show that the proposed scheme has better performance than the conventional FFR in terms of SINR and throughput of macro cell users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.687-694
• /
• 2012

In OFDMA-based cellular system, inter-cell interference (ICI) reduces system capacity by aggravating receiving performance of the users located in edge of the cell. Therefore, to mitigate ICI is very important issue in cellular system. To deal with ICI problem, fractional frequency reuse (FFR) is introduced. FFR is an interference management technique. It separates each cell into inner cell and outer cell. Then, it allocates whole system bandwidth to inner cell and different frequency partition to each sector of outer cell. By doing this, outer cell users can ignore interferences from adjacent cells. So, the receiving performance of the cell edge users can be fairly increased. However, using FFR technique has a fatal side effect. In order to use different frequency partition among three sectors of outer cell, they can use only a third of the whole system bandwidth. Then, the reduction of available bandwidth reduces the system throughput directly. To solve this problem, we propose a new FFR method that allocates partially overlapped frequency partition to each sector of outer cell. And then, we suggest a proper overlapping ratio for practical cellular system.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.278-286
• /
• 2022

In this study, a 33-mode Free-Flooded Ring (FFR) transducer was designed to apply piezoelectric single crystal PIN-PMN-PT, which has high piezoelectric constants and electromechanical coupling coefficient. To ensure low-frequency high transmitting sensitivity characteristics with a small size of FFR transducer, the commercial FFR transducer based on piezoelectric ceramics was compared. To develop the FFR transducer with broadband characteristics, a piezoelectric segmented ring structure inserted with inactive elements was applied. The oil-filled structure was applied to minimize the change of acoustic characteristics of the ring transducer. It was verified that the transmitting voltage response, underwater impedance, and beam pattern matched the finite element numerical simulation results well through an acoustic test. The difference in the transmitting voltage response between the measured and the simulated results is about 1.3 dB in cavity mode and about 0.3 dB in radial mode. The fabricated FFR transducer had a higher transmitting voltage response compared to the commercial transducer, but the diameter was reduced by about 17 %. From this study, it was confirmed that the feasibility of a single crystal-applied FFR transducer with compact size and high-power characteristics. The effectiveness of the performance prediction by simulation was also confirmed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4819-4834
• /
• 2015

The spectral efficiency of cellular networks can be improved when proximate users engage in device-to-device (D2D) communications to communicate directly without going through a base station. However, D2D communications that are not properly designed may generate interference with existing cellular networks. In this paper, we study resource allocation and power control to minimize the probability of an outage and maximize the overall network throughput. We investigate three power control-based schemes: the Partial Co-channel based Overlap Resource Power Control (PC.OVER), Fractional Frequency Reuse based Overlap Resource Power Control (FFR.OVER) and Fractional Frequency Reuse based Adaptive Power Control (FFR.APC) and also compare their performance. In PC.OVER, a certain portion of the total bandwidth is dedicated to the D2D. The FFR.OVER and FFR.APC schemes combine the FFR techniques and the power control mechanism. In FFR, the entire frequency band is partitioned into two parts, including a central and edge sub-bands. Macrocell users (mUEs) transmit using uniform power in the inner and outer regions of the cell, and in all three schemes, the D2D receivers (D2DRs) transmit with low power when more than one D2DRs share a resource block (RB) with the macrocells. For PC.OVER and FFR.OVER, the power of the D2DRs is reduced to its minimum, and for the FFR.APC scheme, the transmission power of the D2DRs is iteratively adjusted to satisfy the signal to interference ratio (SIR) threshold. The three schemes exhibit a significant improvement in the overall system capacity as well as in the probability of a user outage when compared to a conventional scheme.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.108-112
• /
• 1999

A study was conducted for the effects of input energy on fume formation ratios based on electrode(FFR$_{electrode}(g/kg_{electrode})),\;deposited\;metal(FFR_{weld}(g/kg_{weld}))\;and\;slag(FFR_{slag}(g/kg_{slag}))\;at\;CO_2$ flux cored arc welding on stainless steel. Experiments were run in well designed welding fume box. Six types of flux cored wires were used and three levels of current and voltages were given. The measured values of $FFR_{electrode},\;FFR_{weld},\;FFR_{slag}\;are\;7.90{\pm}1.47\;g/kg_{electrode},\;9.18{\pm}1.65\;g/kg_{\electrode},\;71.8{\pm}24.2\;g/kg_{slag}$ respectively. Fume formation ratios are not increased dramatically by input energy because of simultaneous increasing of melted electrodes, deposited metal and slag. The results indicate that the test of fume formation ratios in the research on production of low fume welding wire can be run at the fixed condition of input energy rather than various condition.

• Journal of Internet Computing and Services
• /
• v.22 no.5
• /
• pp.1-8
• /
• 2021

Small-cells in heterogeneous networks are one of the important technologies to increase the coverage and capacity in 5G cellular networks. However, due to the randomly arranged small-cells, co-tier and cross-tier interference increase, deteriorating the system performance of the network. In order to manage the interference, some channel management methods use fractional frequency reuse(FFR) that divides the cell coverage into the inner region(IR) and outer region(OR) based on the distance from the macro base station(MBS). However, since it is impossible to properly measure the distance in the method with FFR, we propose a new interference aware FFR(IA-FFR) method to enhance the system performance. That is, the proposed IA-FFR method divides the MUEs and SBSs into the IR and OR groups based on the signal to interference plus noise ratio(SINR) of macro user equipments(MUEs) and received signals strength of small-cell base stations(SBSs) from the MBS, respectively, and then dynamically assigns subchannels to MUEs and small-cell user equipments. As a result, the proposed IA-FFR method outperforms other methods in terms of the system capacity and outage probability.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.11-17
• /
• 2018

In this paper, we propose a novel frequency reuse method using the fractional frequency reuse (FFR) for enterprise femtocell networks (EFNs) in which a lot of femtocell base stations (fBSs) are deployed in a buinding, e.g., business companies, department stores, etc, and evaluate the system performance for the downlink of EFNs. First, we introduce the concept of the split reuse method to allocate the frequency bandwidth with considering the interference between the macrocell and femtocell. Then, we propose the resource allocation with the FFR for fBSs of EFNs to reduce the interference and increase the system capacity. Through simulations, we show that the proposed FFR method outperforms a traditional resource allocation method with frequency reuse factor 4 in terms of the mean fUE capacity, total EFN capacity, and outage probability.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.1-5
• /
• 2011

Downlink transmit power allocation schemes are proposed for soft fractional frequency reuse (FFR) in loose and tightly coordinated systems. The transmit powers are allocated so that the loss of spectral efficiency from the soft FFR is minimized, and the required cell edge user throughput is guaranteed. The effect of the soft FFR on spectral efficiency is evaluated depending on the power allocation schemes and the number of subbands. Results show that the loss of spectral efficiency from the soft FFR can be reduced by configuring an appropriate number of subbands in the loosely coordinated systems. In tightly coordinated systems, results show that the loss of spectral efficiency can be minimized regardless of the number of subbands due to its fast coordination.