• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.652-658
• /
• 2016

In this paper, the theoretical research and simulation using the Finite Element Method (FEM) to design and form a micro-pattern for an ultrasonic horn is described. The present method is based on an initial design estimate obtained by FEM analysis. The natural and resonant frequencies required for the ultrasonic tool horn used for forming the fine pattern were predicted by finite element analysis. FEM analysis using ANSYS S/W was used to predict the resonant frequency for the optimum technical design of the ultrasonic horn vibration mode shape. When electrical power is supplied to the ultrasonic transducer, it is converted into mechanical movement energy, leading to vibration. The RFID TAG becomes the pattern formed on the insulating sheet by using the longitudinal vibration energy of the ultrasonic tool horn. The FEM analysis result is then incorporated into the optimal design and manufacturing of the ultrasonic tool horn.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.384-390
• /
• 2005

In the numerical analysis of En (eddy current testing) using 3-dimensional FEM (finite element method), MVP (magnetic vector potential) and electric scalar potential are used as variables in conductor region. Three dimensional modeling makes number of unknowns increase, and the degree of freedom of variables also makes number of unknowns increase. Because of this reason, modified UP is used to reduce the number of unknowns. Gauge condition is enforced artificially on existing FEM formulations to insure the uniqueness of MVP. So in this paper the effects of these FEM formulation procedures on ECT are investigated and the appropriate FEM formulation is suggested for accurate ECT simulation.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.661-666
• /
• 2007

최근들어 제품을 개발하는 과정 중, 디자이너와 개발자, 의사 결정권자들이 FEM, CFD 시뮬레이션 결과를 리뷰할 때에 가상현실기술을 도입하는 사례가 늘고 있다. 몰입감을 높여주는 가상현실환경은 모델에 대한 해석 결과물을 정확하고 효과적으로 분석할 수 있도록 돕는다. 데이터의 실제 크기와 같게 혹은 그보다 더 크고 자세한 이미지를 제공하는 가상현실 몰입환경은 사용자가 데스크탑 환경만을 사용할 때 경험할 수 없는 높은 사실감을 제공함으로써 사용자에게 시각적인 만족감을 줄 수 있다. 하지만 데스크탑 환경에 비해 해상도가 낮고, 어두운 곳에서 스테레오 안경이나 HMD(Head Mounted Display), Data glove등을 착용해야 하는 불편함과 멀미, 시각적인 피로, 방향감각 상실로 대표되는 가상멀미 등으로 인해 장시간 사용에 어려움이 있다. 데스트탑 환경에서의 데이터 리뷰는 고해상도 이미지 분석은 가능하지만, 입체감이 떨어지기 때문에 리뷰 데이터의 실제감이 떨어진다. 이와 같은 문제점들을 보완하기 위해서 본 논문에서는 데스크탑 환경과 가상현실 환경 간의 협업이 가능한 FEM/CFD 가시화 시스템을 제시한다. 본 시스템은 가상현실 몰입환경에서 해석 데이터를 단순히 가시화하는 것뿐만이 아니라, 데스크탑 시스템과 동일한 3D 인터페이스 구조를 제공한다. 따라서, 해석 결과 분석을 위한 동일한 post-processing 작업이 네트워크로 연결된 원격 공간의 사용자들이 사용하는 시스템들 사이에서 실시간으로 진행될 수 있다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.252-257
• /
• 2016

Dust-collecting behavior of tonpilz transducer was simulated with finite-element-method (FEM) software. In order to optimize the performance of tonpilz transducer, the shape factors including the thickness of head mass, the diameter of tail mass and the depth of bolt were analyzed as variables. As a vibrating energy source, the piezoelectric materials was also tested with PZT-4 and two kinds of piezoelectric single crystals. The output power of the transducer was maximized with the shape factors and then the behavior of the dust-collection was demonstrated with the multi-physics software, COMSOL.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.74-81
• /
• 2002

Recently tube hydroforming has been widely applied to the automotive industries due to its several advantages over conventional methods. In this paper, attention is paid to comparison of an implicit and an explicit finite element method widely used for numerical simulation of a hydroforming process. For an explicit FEM, a huge amount of computational time is required because of the very small time increment to solve a quasi-static problem. Hence, when an explicit FEM is used fDr a hydroforming process, it is general to convert the real problem to a virtual problem with a different processing time and mass density by appropriate scaling factor. However it is difficult to figure out how large the scaling should be adopted enough to ignore the dynamic effects and maintain the desired accuracy. In this paper, the comparison of the results obtained from both methods focus on the accuracy of the predicted geometrical shape and the stress with various scaling factors which are applied to analyze hydroforming process of an automobile lower arm.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.101-106
• /
• 2011

There are various methods in the flat panel display manufacture. The cost reduction effect is very big in case of using the screen printing method. The screen printing method is much used in the process of forming PDP barrier and can apply to the process of arranging the pillars for maintaining the vacuum gap of the vacuum glazing panel. The pillar which is one of the core elements for comprising vacuum glazing maintains the vacuum gap overcoming the vacuum pressure difference with the atmospheric pressure generated in vacuum glazing. At the same time, the deformation phenomenon by vacuum pressure is relived. In this paper, by using FEM about three considered in the pillar design and arrangement kinds of limiting factors, the simulation was performed. The pillar optimum arrangement method at within the maximum allowable tensile stress and heat transfer coefficients according to the arrangement try to be presented based upon the analyzed result data review and this validity tries to be verified by FEM.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.84-89
• /
• 2000

Thermal simulation of typical stack-type and newly proposed planar-type micro-gas sensors were studied by FEM method. The thermal analyses for the proposed planar structure including temperatur distribution over the sensing layer and power consumption of the heater were carried using finite element method by computer simulation and well compared with those of typical stack-type micro-gas sensor. The thermal properties of the microsensor from thermal simulation were compared with those of a actual device to investigate the acceptability of the computer simulation.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.35-45
• /
• 2006

The simulation of tsunami using detailed bathymetry and topography is required to establish the countermeasure of disaster mitigation and the tsunami hazard map. In this study, a simulation of the 1993 tsunami event in the East Sea using parallel finite element model, which is possible to simulate with suitable accuracy by the Beowulf parallel computation method, is performed to produce detailed features of coastal inundation. Results of simulation are compared with measured data. The evolution of statistic distribution of tsunami heights is studied numerically and the distribution functions of tsunami heights show a tendency to the log-normal curve along coastal area.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.32-37
• /
• 2019

In various types of large-scale electrical applications, the number of coil turns in such machines is usually large. Electromagnetic simulation of large-scale superconducting coils (tens to hundreds of turns) is indispensable in the design process of superconducting electrical equipment. However, due to the large scale of the coil and the large aspect ratio of super-conducting material layer in HTS coated conductor, it is usually difficult or even unable to perform 3-D transient electromagnetic simulation. This paper introduces an effective 3-D electromagnetic simulation method for large-scale HTS coated conductor coil based on T-A formulation. The simulation and experimental results show that the 3-D model based on the T-A formulation using homogeneous strategy is more accurate than the traditional 2-D models. The memory usage is not sensitive to the number of turns and this model will be even more superior as the number of turns becomes larger.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.236-239
• /
• 1995

In this paper,Upper bound analysis to predict the formation of corner cavity during the final stage of backward extrusion is used. The critical condition for corner cavity formation is obtained by upper bound analysis. The quantitive relationships between corner cavity formation and process parameters are studied. To broaden forming limit area, driven container and multi-step forming process is proposed. As a result of FEM, forming limit is enlarged. And this results is compared with the analytric results