• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.840-840
• /
• 2003

Operational Modal Analysis (OMA) is a technique for identification of modal parameters by measurement of only the system's response. On many lightweight structures, such as load-speaker cones and disk drive read/write heads, is impossible or impractical to measure the input forces. Another characteristic of lightweight structure is their sensitivity to mass loading from sensors. The Scanning Laser Doppler Vibrometry(SLDV) allows response measurements to be taken without mass loading. One disadvantage of OMA testing compared to tradition input output modal testing is the OMA mode shapes are un-scaled. This means that the mode shape obtained from an OMA test can not used for analytical structural modification studies. However, the un-scaled mode shapes from an OMA test can be used to update a Finite Element Model (FEM). The updated FEM can then be used to analytically predict the effect of structural modifications. This paper will present the results of an OMA test performed on a simple plate and motor in operating conditions. The un-scaled mode shapes from this test will be used to update a FEM model of the system. The updated FEM model will be then be used to predict the effect of attaching a mass to the plate. The shapes predicted by the FEM for the modified system will be compared to a second OMA test on the modified system

• 한국산업융합학회 논문집
• /
• 제10권1호
• /
• pp.5-14
• /
• 2007

It is necessary for development of drawing product with press to have suitable material selection & all process design and the problem during press process has been cleared from judgement of experience & trial and error. Recently we can estimate press process result from computer aided design & FEM. But we can get more reliable result when we can put more precise process variants during FEM. In case of using a drawbead that is used for the material inflow, it is considered for us to put material property, other analysis condition & friction figure when material is passing through the drawbead for better FEM. From our study, we have drawn an analogy bead connection depth, friction figure & drawing and restraining load according to kinds of lubrication from experiment & FEM for the drawbead. We applied above result to the drawing experiment & FEM and confirmed the validity. We could notice the relation between friction figure & drawing load and the friction figure variation according to kinds of lubrication. It is expected to draw more precise analogy that can be used for real process due to more precise process variants application to FEM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.565-567
• /
• 2000

In this paper, the discharge characteristics of AC PDP, one of the leading technologies currently under development for large-area flat displays, is computed by using Finite Element Method(FEM) combined with Flux-corrected Transport(FCT) algorithm. Up to now, many simulations of AC PDP have been mainly done by Finite Difference Method(FDM). But we simulated the AC PDP by using FEM-FCT method which discretizes the region of interest with unstructured grids. FEM-FCT method can reduce the computational cost because of refining locally where the physical quantities have steep gradients and is more efficient in solving discharge problems, such as a AC PDP. Results are presented in Ne-Xe(4%) gas mixture for a gas pressure of 400 Torr and as the discharge proceeds, the space and time variations of the electron and ion densities, potential and wall charges on the dielectric are described. Results from our simulation by FEM-FCT are similar to those from simulation by FDM and are more efficient in computational cost reduction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.47-50
• /
• 1997

The FEM(Finite Element Method) can be used to analysis SRM(Switched Reluctance Motor) as it can account for the salient pole geometry of the stator and rotor and the nonlinear properties of the magnetic materials. However, FEM requirers a lot of computer memory and computing time because, the kind of SRM drivers is verity and the switching strategies are various for one SRM driver. In this paper we proposed the method of analysis of a SRM which results are similar to FEM and has very short computing time. The Inductance and torque for each phase current at each rotor position are calculated by using two-dimensional nonlinear FEM analysis. Using the look-up table of inductance and torque and the voltage equations of SRM we obtained the phase current and torque. To verify proposed algorithm, 3 phase 6/4 SRM is analysed and found a good agreement with FEM results. And computing time is about 1/1600 of the FEM analysis.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권2호
• /
• pp.81-87
• /
• 2017

315Fr 컴프레서용 모터가 진동 기준을 초과하는 문제가 발생하였고 이를 해결하기 위한 FEM해석과 모드실험을 수행하였다. 먼저 자유단 조건하의 해석과 실험을 수행하여 해석을 위한 조건을 확인하였다. 해석을 위한 Mesh, 재질, 경계 조건을 검토하였다. 여기서 얻은 결과를 바탕으로 볼트가 고정된 상태의 FEM 해석과 모드 실험을 수행하여 진동의 원인을 확인하였다. 모드실험 결과 121.7Hz에 Rolling 모드가 있음을 확인하였고 해석을 통해서도 동일한 결과를 얻을 수 있었다. 이 결과를 바탕으로 진동 기준을 초과하는 원인은 120Hz에 존재하는 Rolling 운동과 2X, 2fl 가진 주파수의 공진에 의한 것임을 알게 되었다. 여기서 얻은 결과를 바탕으로 추후 시리즈 설계에 있어서는 시험 모델 제작이나 실험 없이 해석만으로 문제점을 예측하고 해결할 수 있는 기술을 보유하게 되었다.

• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.471-480
• /
• 2022

Inductive power transfer (IPT) is an attractive power transmission solution that is already used in many applications. In the IPT system, optimal coil design is essential to achieve high power efficiency, but the effective design method is yet to be investigated. The inductance formula and finite element method (FEM) are popular means to link the coil geometric parameters and circuit parameters; however, the former lacks generality and accuracy, and the latter consumes much computation time. This study proposes a novel coil design method to achieve speed and generality without much loss of accuracy. By introducing one-turn permeance simulation in each FEM phase combined with curve fitting and optimization by MATLAB in the efficiency calculation phase, the iteration number of FEM can be considerably reduced, and the generality can be retained. The proposed method is verified through a 100 W IPT system experiment.

• Composites Research
• /
• 제28권1호
• /
• pp.6-14
• /
• 2015

치아의 수복에 사용되는 재료인 Methacrylate 기질 복합레진(Clearfil AP-X)과 Silorane 기질 복합레진(Filtek P90)을 대상으로 스트레인게이지법과 FEM 분석법으로 중합수축응력거동을 분석하였다. 또한 복합레진의 탄성계수와 수축변형률을 중합수축응력과 관계시켜 이론식을 제시하고 이 식의 계산결과와 FEM 분석법의 결과를 비교하였다. 스트레인 게이지법으로 측정한 결과, 중합수축응력의 최대값은 Clearfil AP-X가 Filtek P90 보다 약 2.8배 높게 나타났다. FEM 분석 결과, Von-Mises 응력은 복합레진 수복재와 PMMA 링사이의 계면부에서 최대로 되었으며 시편표면의 계면부가 내부보다 응력집중이 더 컸음을 알았다. 예측식을 통한 반경 방향의 수축응력은 평면응력상태의 FEM 분석법을 통한 값과 비교하여 오차 5% 이내로 정확했음을 확인하였다.

• 조명전기설비학회논문지
• /
• 제20권8호
• /
• pp.80-87
• /
• 2006

본 논문에서는 3차원 FEM을 이용하여 Claw pole stoning motor의 특성을 해석하였다. Claw pole stewing motor는 구조상 z-축 방향으로 자화가 발생하고 모델의 특성상 3차원 FEM해석이 필수적이다. 해석 시간을 고려해 볼 때 목적하고자 하는 성능을 갖는 모터 설계 시 시간을 효율적으로 줄이기 위한 방법 중 하나는 해석 대상의 개수를 줄이는 것이다. 이에 본 논문에서는 실험계획법(Design of Experiments)을 이용하여 Claw pole stewing motor의 해석 및 설계 시 중요 변수인 영구자석, 폴형상, 권선수의 설계 변수를 설정하여 이 설계변수의 조합으로 나오는 해석 모델의 개수를 최소화하고 이렇게 줄어든 최적의 모델을 선정하여 3차원 FEM으로 해석하여 특성을 살펴보았다.

• 대한토목학회논문집
• /
• 제5권3호
• /
• pp.39-47
• /
• 1985

본문(本文)은 연약점토지반(軟弱粘土地盤)에 이차원성토(二次元盛土)를 할 경우 지반(地盤)의 심하(沈下) 및 변위(變位)를 FEM으로 해석(解析)하는 프로그램의 연구에 대한 결과를 보고한 것이다. 구성방정식(構成方程式)으로서는 Cam-clay, Modified Cam-clay, 탄점소성(彈粘塑性)의 3 모델에서 각각 취하여 Biot의 압밀방정식(壓密方程式)과 결합(結合)시켜 이들간의 정도(精度)를 비교(比較)하고 또한 1982년(年) Magnan 등에 의해 불(佛)의 Cubzac-les-ponts에서 시험성토(試驗盛土)를 실시(實施)하여 실측(實測)과 해석결과(解析結果)를 발표(發表)한 바 있는데 그 결과(結果)와 비교(比較)한 것이다. 그 결과(結果)는 본(本) 프로그램이 보다 더 실측치(實測値)에 가깝다는 것이 확인되고 간극수압(間隙水壓)의 처리(處理)는 Christian-Boehmer 계(系)의 FEM 해석(解析)이 그들이 사용(使用)한 Sandhu-Wilson 계(系)보다 더 실제에 가깝고 성토부(盛土部)를 유한요소화(有限要素化)하는 것이 더 정확하다고 판단된다.

• Structural Engineering and Mechanics
• /
• 제70권1호
• /
• pp.13-31
• /
• 2019

A nonlinear finite element model (FEM) using ATENA-3D software to simulate the axially compressive behavior of circular steel tube confined concrete (CSTCC) columns infilled with ultra high performance concrete (UHPC) was presented in this paper. Some modifications to the material type "CC3DNonlinCementitious2User" of UHPC without and with the incorporation of steel fibers (UHPFRC) in compression and tension were adopted in FEM. The predictions of utimate strength and axial load versus axial strain curves obtained from FEM were in a good agreement with the test results of eighteen tested columns. Based on the results of FEM, the load distribution on the steel tube and the concrete core was derived for each modeled column. Furthermore, the effect of bonding between the steel tube and the concrete core was clarified by the change of friction coefficient in the material type "CC3DInterface" in FEM. The numerical results revealed that the increase in the friction coefficient leads to a greater contribution from the steel tube, a decrease in the ultimate load and an increase in the magnitude of the loss of load capacity. By comparing the results of FEM with experimental results, the appropriate friction coefficient between the steel tube and the concrete core was defined as 0.3 to 0.6. In addition to the numerical evaluation, eighteen analytical models for confined concrete in the literature were used to predict the peak confined strength to assess their suitability. To cope with CSTCC stub and intermediate columns, the equations for estimating the lateral confining stress and the equations for considering the slenderness in the selected models were proposed. It was found that all selected models except for EC2 (2004) gave a very good prediction. Among them, the model of Bing et al. (2001) was the best predictor.