• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.146-151
• /
• 2001

This study is an investigation for the ADS optimum design by using FEM. We write out program which express ADS perfectly and reduce the required time for correcting of model to the minimum in solution and manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. For that, we draw up ADS program which modeling rachet wheel by using visual LISP and telegraph to ANSYS, structural solution program, we can solve stress solution. Then we correct model by feedback date obtaining in solution process, repeat course following stress solution again and do modeling rachet wheel for optimum forming. That is our aim. As a result of experience, we can develope automatic design program using Visual LISP and exhibit ADS as modeling third dimension CAD for optimum design. Also, we develop optimum design algorithm using ADS and FEM. In rachet wheel, greatest equivalence stress originates in key groove comer and KS standard is proved the design for security.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.158-165
• /
• 2004

The DC motor in a vehicle may cause noise and vibration because of high speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, focusing mostly on the causes of and ways to reduce noise and vibration. It is suggested that the noise in a DC motor may be primarily due to interaction between a brush and a commutator. Brush noise, the most common noise in a DC motor, results from a brush bounced from the surface of the commutator, fluctuation of the friction between the brush and the commutator, and the impact on the brush when passing over slots of the commutator. Based on the noise test, one of the most important design parameters was shown to be the roundness of the commutator. As the DC motor is used, the roundness of the commutator gets bigger with subsequent increase of the level of brush noise and vibration. There must be a threshold in order to prevent the brush noise from getting worse. Using the method of CAE is more efficient than the real test for purposes of looking for various design parameters to maintain the roundness of the commutator. In this study, the design process to reduce the brush noise is presented with the use of a computer model. The design parameters to reduce the brush noise and vibration are proposed by using FEM. The design parameters are used to reduce the noise and vibration of a DC motor and it is verified with the test results on a fan DC motor in a vehicle. This method may be applicable to various DC motor.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.453-460
• /
• 2016

해상풍력터빈 시스템은 크게 상부의 풍력터빈과 하부의 지지구조로 구성된다. 해상풍력발전은 육상용 풍력발전보다 우수하다는 평가가 지배적이지만 육상용 풍력발전에서 고려되지 않는 파랑에 의한 주기적인 하중이 추가로 고려되기 때문에 다양한 외부 환경조건에 대하여 높은 안정성 확보가 요구된다. 본 연구에서는 전산유체역학 기법을 활용하여 설계된 해상풍력 하부구조에 대한 하중해석을 수행하고 유한요소해석을 통해 설계된 자중조절형 해상풍력 기초에 대한 구조 건전성을 검토하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.672-677
• /
• 2007

Recently, the new finite element method which uses NURBS as shape functions was proposed. It is very promising because it can directly use CAD data to describe geometry and discretize problem domain. In this case, CAE models are not approximated but represent exact geometry. So, it can contribute to more accurate results. In addition, it can greatly reduce CAE costs in that simulation models don't have to be made up independently. But in spite of these advantages, the method using NURBS have also some disadvantages. NURBS surface cannot be refined locally. T-splines are recently developed surface modeling technique. A T-spline surface is a NURBS surface with T-junctions and is defined by a control grid called T-mesh. The T-junctions enable T-spline surfaces to be refined locally. That is, it is possible to add a single control point to a T-spline control grid without propagating an entire row or column of control points and without altering the surface. In this research, the finite element analysis using T-splines is studied. In this analysis, CAD data are used directly for engineering analysis. Some problems with complex geometry are solved. And the results will be compared with ones of conventional FEM.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.439-447
• /
• 2008

One of the key elements in efforts to minimize noise radiation from a powertrain is the knowledge of the main radiating component and the relation between the surface vibration of a powertrain and the sound pressure. In this research, the powertrain model is developed based on FEM(finite element method). This model is applied to the prediction of the vibration of a powertrain by using ADAMS and the radiation noise by using BEM(boundary element method). According to this numerical analysis, the surface vibration of a powertrain is investigated as a source of radiated noise. This surface vibration is caused by the 1st order natural vibration of the cylinder block and its mode shape is the torsion mode. Therefore, this mode shape is modified to reduce the surface vibration of the powertrain. The radiation noise of the modified powertrain is also reduced to $5{\sim}12\;dB$. This modification is very successful for the noise reduction based on the CAE technology.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.472-473
• /
• 2008

In this research, the finite element model is formulated taking into consideration of the effects of the fluid flow in a pipe. The characteristic of vibration is presented using mass, damping and stiffness matrix in the finite element equation of this pipe system. The displacement distribution of pipe system caused by fluid force is discussed. The method for optimizing the location of mount and the value of mount stiffness to reduce the vibration of pipe system is introduced.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1882-1887
• /
• 2002

This study is to develop a automatic design program of mechanical elements as the integrated system which can create automatically 3-dimensional solid and surface model using visualLISP. By the applying developed system to CAE system, the following objects are realized. At first, constructing the library of automatic design program for unexperienced design engineer, the 3-dimensional modeling of mechanical elements can be obtained easily. at second, the 3-dimensional model for ratchet wheel design is created by finete element model of CAE system and the optimal design condition of key way.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.50-57
• /
• 2004

Structural analysis and fatigue tests have been performed to develop design and evaluation technologies of automotive seat frames. Under the back moment loading condition, the numerical simulation unveiled the maximum stress up to the yield strength at the side frame bracket. To measure the stresses under the test condition, strain gauges were attached to some weakest points of the side frames. the measured strains are in good agreements with the CAE results. On the other hand, some fatigue tests have been performed using the side frame bracket specimens made of various welding types to evaluate their durabilities. From the fatigue tests and the numerical analyses, it was recommended that the bracket welding position should be moved upward.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.129-134
• /
• 2001

One of the most important purposes in the design of machines and structures is to produce the most light products of the lowest price with satisfying function and performance. In this study, a scheme of design optimization for the weight down of vehicle body structure is presented. Design sensitivity of vehicle body structure is investigated and design optimization is performed to get weight down with the allowable stiffness of body in white. Stress, deformation and natural frequencies are the constraint of the optimization.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.121-124
• /
• 2002

This paper resents a virtual forming system to simulate deep drawing process for stress-strain information by utilizing virtual system designed using Virtual Reality Modeling Language (VRML) and computer aided analysis (CAE) tool. The CAE tool to calculate stress, strain, and deformation is designed using Finite Element Method. Stress distributions and deformation profiles as well as the operation of forming machine can be simulated and visualized in the web. The developed system consists of three modules, input module, virtual forming machine module, and output module. The input nodule was designed using HTML and ASP. The input data for FEM calculation is directed to the forming machine module for calculation. The results from the forming machine module can be visualized through output module as well as the forming process simulation.