• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1619-1621
• /
• 2005

AC electric railway feeding system classifies into three groups such as normal, TIE and PP feeding method. If the feeding scheme of ac electric railway is changed, current distribution flowing through the line is also modified. And if the current distribution is altered according to the feeding scheme, returned tendency through rail load current or fault current of the train is changed. So the investigation about error correcting method of protective relay is needed considering feeding scheme. In this paper prior to error correcting of protective relay, through interpreting feeding circuit, changes in current distribution of the rail in accordance with feeding would be predicted and analyzed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권1호
• /
• pp.55-61
• /
• 1992

To determine the effect of time after feeding on distribution of particle size of digesta in the gastrointestinal tract, 16 sheep given orchardgrass first cut hay were slaughtered at 2, 8, 16 and 24 hours after feeding and digesta in diverse sites of the tract were sieved into four fractions of particle size larger than $1180{\mu}m$, 300-1180, 45-300 and less than 45. Following results were obtained: 1) In the reticulo-rumen, the proportion of particles larger than $1180{\mu}m$ decreased with the time after feeding, while the other particle size fractions did not change with time after feeding. 2) In the post-ruminal alimentary tract, the proportion of particles larger than $1180{\mu}m$ was significantly smaller than that in the reticulo-rumen and distribution of fractions of every particle size stayed consistently at about the same level irrespective of the time after feeding. 3) In the cecum, the fraction of particle size less than $45{\mu}m$ appeared to be selectively retained when the passage rate was considered.

• 한국환경생태학회지
• /
• 제25권4호
• /
• pp.516-525
• /
• 2011

본 연구는 두루미류의 공간적 분포 양상을 확인하고, 환경요인(잠자리, 도로, 인가)의 영향범위와 영향력을 평가한 것이다. 조사는 2007년 1월에서 2월까지 4회에 걸쳐 철원지역 두루미류의 분포를 거리측정기와 GPS를 이용하여 수집하였다. 두루미류의 서식이 가능한 것으로 조사된 지역은 총 $76.9km^2$였으며, 두루미 Grus japonensis 와 재두루미 Grus vipio 555개 무리의 분포위치를 수집한 후 환경요인과의 거리별 밀도를 분석하였다. 두루미류의 취식분포는 특정지역에 밀집한 분포를 보였으며, 인근지역에서 취식하는 두루미류 취식무리 간의 개체수는 공간적자기상관관계가 없는 것으로 나타났다. 두루미류의 취식무리수 밀도는 잠자리와의 거리에 따라 상관이 없었다. 하지만, 포장도로와 인가지역은 가까울수록 서식밀도가 낮은 경향을 보였다. 포장도로의 경우 1,500m 에서 밀도 변곡점을 보였으며, 인가지역으로 부터 취식밀도는 1,750m 에서 밀도 변곡점을 보였다. 잠자리와 취식지간의 거리별 밀도변화는 취식무리수 밀도에서만 확인할 수 없었다. 포장도로와의 거리가 멀어짐에 따라 두 종의 취식무리수 밀도는 증가하지 않았으나, 개체수밀도는 유의하게 증가하는 양상을 보였다. 인가와의 거리가 늘어남에 따라 두루미와 재두루미 모두 취식무리 밀도와 개체수밀도 모두에서 유의한 증가양상을 나타내었다. 잠자리와의 거리가 멀어질수록, 두루미는 취식무리 밀도와 개체수밀도가 모두 감소하는 경향을 보였으나 재두루미의 경우 증감의 경향을 보이지 않았다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권1호
• /
• pp.99-102
• /
• 1991

To determine effect of time after feeding on distribution of digesta in the gastro-intestinal tracts of sheep given orchardgrass hay once a day, a total of fifteen ewes (mean live weight $51{\pm}12kg$) were slaughtered at 2, 8, 16 and 24 hours after feeding. Contents in the reticulo-rumen, omasum, abomasums, small intestine, cecum, and colon and rectum were totally collected and weighed. Weights of digesta in the reticulo-rumen were about 6 kg which contributed about 75% of the total in the whole tracts. Digesta on dry-matter basis totaled about 1 kg. The dry-matter concentration of digesta in the whole digestive tract was about 107 h/kg of fresh digesta. Distribution of moisture in the digestive tract changed in parallel with that of fresh digesta. There was no significant correlation observed between time after feeding and weights of digesta in the gastro-intestinal tracts. While, feed intake significantly correlated with digesta in the reticulo-rumen, cecum and whole tracts (p<0.01). Thus, time after feeding was inferred to have no influence upon the content of digesta in the digestive tract, but feed intake influenced on the content of digesta in the digestive tract at a low level of feeding.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.380-387
• /
• 2013

In this study, two finite element (FE) models were developed to evaluate the thermal characteristics of a feeding axis of a CNC lathe. One was used for analysis of heat transfer to identify the temperature distribution of the feeding axis and then, the other was used for analysis of thermal deformation to evaluate its structural behavior based on the temperature distribution. The FE models were based on the test standard for the axial thermal displacement. The feeding velocity was composed of three steps: the ascending, constant, and descending velocities. Therefore, the heat generation and convection coefficient were calculated for each velocity and applied to the thermal FE model. The convection coefficient for the ball screw rotation was based on an experimental equation. The result of the analytical thermal displacement was compared with that of the experimental displacement to verify the finite element models.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.682-687
• /
• 2005

High quality power supplying of power distribution system in electric railway system is the important function. Power feeding system is complicated witch is compose with distribution line, circuit break, protection facilities and so on. Among this components, role of substation is most important for elevation of reliability in electric power system. Therefore, the enhanced reliability considering the preventive inspection, repair work, replacement is necessary. In this study, a proposed the enhanced reliability method through a calculation of fault probability in power feeding system.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.171-172
• /
• 2006

The effect of the preparation factors, such as the feeding mode and rate of raw materials, the reaction temperature and the surfactant on the size distribution of molybdenum trioxide particle were investigated by orthogonal test. The optimum conditions for the preparation of $MoO_3$ precursors are as following; opposite feeding fast, reaction temperature of $60^{\circ}C$ and adding dispersant.

• 한국환경생태학회지
• /
• 제22권6호
• /
• pp.632-639
• /
• 2008

기러기류의 분포양상과 시기에 따른 분포변화에 대한 연구를 2006년 10월부터 2007년 3월까지 천수만 부남호와 간월호에서 실시하였다. 기러기류는 주간에 주로 농경지에 분포하였으며, 해안에서는 관찰되지 않았다. 격자별 최대개체수를 이용한 분포도에서, 농경지에서 관찰된 기러기류는 부남호와 간월호 지역 모두 면적이 넓은 지역에 대한 분포비율이 높았다. 특히, 잠자리지역인 저수지와 가까운 지역의 취식비율이 높았다. 기러기류의 주간 취식지는 부남호와 간월호 모두 초기 10월에는 잠자리 지역인 저수지 인근 농경지를 이용하였지만, 월동 중기 1월 이후에는 잠자리에서 먼 지역을 취식지로 이용하였다. 월동말기인 3월에는 개체수 규모가 크게 줄어들고 잠자리에서 먼 지역의 농경지를 더 높은 비율로 이용하였다. 저수지에서 가까운 1km 이내 지역의 평균 개체수가 다른 지역에 비하여 높았다. 월동초기($10{\sim}11$월)에는 저수지 인근지역이 취식지로 선호되었지만, $12{\sim}1$월 그리고, $2{\sim}3$월로 갈수록 평균 서식개체수의 차이가 감소하여 유의한 차이가 없었다. 1km 이내의 격자지역은 초기에 매우 높은 서식지 이용률을 보이지만 차차 감소하여 2월 이후 다시 증가하였다. 반면, 저수지로부터 2km 이상 떨어진 지역은 초기에 매우 낮은 서식지 이용률을 보이지만, 점차 증가하여 1월말에 최대 이용률을 보이고, 이후 점차 감소하였다. 1km 이상2km 미만에 해당하는 지역은 초기에 2km 이상지역보다 이용률이 높고, 1km 미만의 지역보다 낮은 서식지 이용률을 보이지만 11월까지 증가하다가 점차 감소하는 양상을 보였다. 본 연구결과는 기러기류의 취식지 선택이 잠자리와의 거리에 영향을 받으며, 취식무리의 체류 시간에 따라서 먹이량이 감소하여 취식지 선택 양상이 변화하는 것을 보여준다.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.367-376
• /
• 2004

Macrobenthos were collected at 7 stations located from $5^{\circ}N$ to $10^{\circ}N$ with 1o interval along the longitude of $131^{\circ}W$ using a box corer with sampling area of $0.25\;m^2$ in July, 1999. In order to see the vertical distribution of macrobenthos in sediments, each subcore sample was divided into 5 layers with 1 cm interval up to 6 cm depth. Each subcore sample was sieved through 0.3 mm mesh screen and fixed with 10% Rose Bengal added formalin. A total of 22 faunal groups in 11 phyla were sampled and the average density was $959\;{\pm}\;584\;ind./m^2$. Foraminiferans comprised 34.8% of total specimens were the most abundant fauna, and followed by nematodes (27.5%), polychaete worms (15.7%), and benthic harpactoid copepods (10.4%). A latitudinal trend was shown in the distribution of macrobenthos; the maximum density of $1,832\;ind./m^2$ appeared at station N06 and the most poverished community occurred at station N09 with the density of $248\;ind./m^2$. The density of typical macrofaunal taxa except foraminiferans and nematods was $116\;ind./m^2$. In the vertical distribution of macrobenthos, more than 70% of macrobenthos occurred in the upper 2 cm layer, and upper 4 cm layer contained about 90% of macrofauna. Polychaete worms consisted of 22 families, and cirratulid and paraonid worms were dominant polychaete species. The prominant feeding guilds of polychaete worms were SDT (surface, descretely motile, tenaculate feeding) and SMX (surface, motile, non-jawed); they comprised more than 50% of polychaete abundance. These feeding guilds of polychaete worms suggests that the deep sea benthos should be well adapted the newly settled deposits from water column, but this should be clarified by the further studies.

• 한국수산과학회지
• /
• 제46권6호
• /
• pp.973-976
• /
• 2013

We observed the vertical distribution and feeding ecology of the Mirror dory, Zenopsis nebulosa, in the Southern Sea of Korea from 2009 to 2013 using an otter trawl. The total length of captured individuals ranged from 11 to 48 cm. Individuals captured at greater depths were significantly larger than those from shallower sites. Fish abundance was significantly related to depth and temperature. We found that 89% of the total catch was obtained at depths between 80 and 140 meters. Prey organisms, including fish, crustaceans, and cephalopods, were found in Z. nebulosa stomachs. Fishes were the main prey items for all size groups. Cephalopods were consumed by individuals > 25 cm in length. Our findings suggested that the vertical distribution of Z. nebulosa varied with depth and temperature, and that the fish are carnivores.