• Title/Summary/Keyword: FEEDING DISTRIBUTION

Search Result 346, Processing Time 0.033 seconds

The Estimation of Rail Current Distribution According to Feeding Scheme (급전방식에 따른 레일전류 분포 예측)

  • Lee, C.M.;Han, M.S.;Jung, H.S.;Kim, J.R.;Kim, H.J.
    • Proceedings of the KIEE Conference
    • /
    • 2005.07b
    • /
    • pp.1619-1621
    • /
    • 2005
  • AC electric railway feeding system classifies into three groups such as normal, TIE and PP feeding method. If the feeding scheme of ac electric railway is changed, current distribution flowing through the line is also modified. And if the current distribution is altered according to the feeding scheme, returned tendency through rail load current or fault current of the train is changed. So the investigation about error correcting method of protective relay is needed considering feeding scheme. In this paper prior to error correcting of protective relay, through interpreting feeding circuit, changes in current distribution of the rail in accordance with feeding would be predicted and analyzed.

  • PDF

EFFECT OF TIME AFTER FEEDING ON DISTRIBUTION OF FEED PARTICLES IN THE GASTROINTESTINAL TRACT OF SHEEP GIVEN ORCHADGRASS HAY ONCE A DAY

  • Sekine, J.;Imaki, Y.;Kuninishi, Y.;Oura, R.;Miyazaki, H.;Okamoto, M.;Asahida, Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.5 no.1
    • /
    • pp.55-61
    • /
    • 1992
  • To determine the effect of time after feeding on distribution of particle size of digesta in the gastrointestinal tract, 16 sheep given orchardgrass first cut hay were slaughtered at 2, 8, 16 and 24 hours after feeding and digesta in diverse sites of the tract were sieved into four fractions of particle size larger than $1180{\mu}m$, 300-1180, 45-300 and less than 45. Following results were obtained: 1) In the reticulo-rumen, the proportion of particles larger than $1180{\mu}m$ decreased with the time after feeding, while the other particle size fractions did not change with time after feeding. 2) In the post-ruminal alimentary tract, the proportion of particles larger than $1180{\mu}m$ was significantly smaller than that in the reticulo-rumen and distribution of fractions of every particle size stayed consistently at about the same level irrespective of the time after feeding. 3) In the cecum, the fraction of particle size less than $45{\mu}m$ appeared to be selectively retained when the passage rate was considered.

Spatial Distribution of Feeding Site and the Relationship between Density and Environmental Factors(Roosting Site, Road and Residence) of Cranes in Cheorwon Basin, Korea (두루미류 취식지역의 공간적 분포 및 서식밀도와 잠자리, 도로, 인가지역과의 관계)

  • Yoo, Seung-Hwa;Kwon, Hyuk-Soo;Park, Jong-Jun;Park, Chong-Hwa
    • Korean Journal of Environment and Ecology
    • /
    • v.25 no.4
    • /
    • pp.516-525
    • /
    • 2011
  • We studied the influence certain environmental factors (proximity of roosting site, roads, and residential areas) have on the spatial distribution of cranes in the Cheorwon, Korea. Using a range finder and GPS, data were collected from January to February 2007 and were subsequently evaluated with ArcGIS. The size of the cranes' wintering habitat was estimated to be 7$76.9km^2$. Five hundred and fifty-five flocks of cranes were observed and detailed distributions were collected. Feeding distribution of the cranes showed clustered distribution, however, no tendencies of spatial autocorrelation were apparent. Adjacent regions with paved roads and residences showed lower densities than other areas. Distances at which paved roads and residential areas induced changes in feeding flock densities were 1500m and 1750m, respectively. Feeding flock density decreased with increased distance from roosting site. Feeding flock density of the two crane species did not increase as distance from roads increased, however, the density of individuals showed a significant increasing tendency with increased distance from roads. In both species, density of feeding flocks and individuals significantly increased with increasing distance from residential areas. In Red-crowned Cranes, the density of feeding flocks and individuals significantly decreased with increasing distance from roosting site, however, in the case of White-naped Cranes, there was an even distribution in density of feeding flocks and individuals.

EFFECT OF TIME AFTER FEEDING ON DISTRIBUTION OF DIGESTA IN THE GASTRO-INTESTINAL TRACTS OF SHEEP

  • Sekine, J.;Oura, R.;Miyazaki, H.;Okamoto, M.;Asahida, Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.4 no.1
    • /
    • pp.99-102
    • /
    • 1991
  • To determine effect of time after feeding on distribution of digesta in the gastro-intestinal tracts of sheep given orchardgrass hay once a day, a total of fifteen ewes (mean live weight $51{\pm}12kg$) were slaughtered at 2, 8, 16 and 24 hours after feeding. Contents in the reticulo-rumen, omasum, abomasums, small intestine, cecum, and colon and rectum were totally collected and weighed. Weights of digesta in the reticulo-rumen were about 6 kg which contributed about 75% of the total in the whole tracts. Digesta on dry-matter basis totaled about 1 kg. The dry-matter concentration of digesta in the whole digestive tract was about 107 h/kg of fresh digesta. Distribution of moisture in the digestive tract changed in parallel with that of fresh digesta. There was no significant correlation observed between time after feeding and weights of digesta in the gastro-intestinal tracts. While, feed intake significantly correlated with digesta in the reticulo-rumen, cecum and whole tracts (p<0.01). Thus, time after feeding was inferred to have no influence upon the content of digesta in the digestive tract, but feed intake influenced on the content of digesta in the digestive tract at a low level of feeding.

Evaluation of Thermal Characteristics for a Feeding Axis of Machine Tools Using Finite Element Analysis (유한 요소 해석을 활용한 공작기계 이송축 열적 특성 평가)

  • Lee, Chang Hoon;Choi, Jin Woo
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.22 no.3
    • /
    • pp.380-387
    • /
    • 2013
  • In this study, two finite element (FE) models were developed to evaluate the thermal characteristics of a feeding axis of a CNC lathe. One was used for analysis of heat transfer to identify the temperature distribution of the feeding axis and then, the other was used for analysis of thermal deformation to evaluate its structural behavior based on the temperature distribution. The FE models were based on the test standard for the axial thermal displacement. The feeding velocity was composed of three steps: the ascending, constant, and descending velocities. Therefore, the heat generation and convection coefficient were calculated for each velocity and applied to the thermal FE model. The convection coefficient for the ball screw rotation was based on an experimental equation. The result of the analytical thermal displacement was compared with that of the experimental displacement to verify the finite element models.

Improvement Method of Supplying Reliability on the Electric Railway Power Distribution System (전기철도 고압배전시스템의 공급신뢰도 향상 방안 연구)

  • Kim Young-Sun;Chang Sang-Hoon;Kim Wang-Gon
    • Proceedings of the KSR Conference
    • /
    • 2005.11a
    • /
    • pp.682-687
    • /
    • 2005
  • High quality power supplying of power distribution system in electric railway system is the important function. Power feeding system is complicated witch is compose with distribution line, circuit break, protection facilities and so on. Among this components, role of substation is most important for elevation of reliability in electric power system. Therefore, the enhanced reliability considering the preventive inspection, repair work, replacement is necessary. In this study, a proposed the enhanced reliability method through a calculation of fault probability in power feeding system.

  • PDF

The Effect of the Acid Precipitate Conditions on the Size Distribution of Molybdenum Trioxide Particle

  • Tang, Jun-Li
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09a
    • /
    • pp.171-172
    • /
    • 2006
  • The effect of the preparation factors, such as the feeding mode and rate of raw materials, the reaction temperature and the surfactant on the size distribution of molybdenum trioxide particle were investigated by orthogonal test. The optimum conditions for the preparation of $MoO_3$ precursors are as following; opposite feeding fast, reaction temperature of $60^{\circ}C$ and adding dispersant.

  • PDF

Distribution Aspect and Seasonal Distribution Change of the Wintering Geese in Cheonsu Bay (천수만에 도래하는 기러기류의 분포양상과 시기에 따른 분포의 변화)

  • Yoo, Seung-Hwa;Kim, Jun-Beom;Kim, In-Kyu
    • Korean Journal of Environment and Ecology
    • /
    • v.22 no.6
    • /
    • pp.632-639
    • /
    • 2008
  • This paper deals with feeding site distribution aspect and seasonal distribution change of the wintering geese in Cheonsu bay and reclaimed area from October 2006 to March 2007. Geese were distributed mostly in agricultural land(rice field) during day time. According to the distribution map by maximum counts, observed geese of agricultural land were frequently distributed in large agricultural land. Especially, Geese were more used agricultural land near the reservoir where used as roosting site than the other sites. Diurnal feeding site of the geese were agricultural land near the reservoir with huge flock during early wintering season(October), but geese were used the agricultural land far from reservoir after mid wintering season(after January). The feeding flock size of Geese were decreased and feeding site was more far from the reservoir than in mid wintering season during late wintering season(March). Habitat use rate of the quadrat area where below 1km from the reservoir was most high in early wintering season. Contrary, habitat use rate where 2km far from the reservoir was shown lowest habitat use rate in early wintering season, but it was increased during mid wintering season(January) and decreased after mid wintering season. Habitat use rate of the agricultural land where 2km below and 1 km far from reservoir was shown middle rate, but it was increased until November and decreased after November. This result shown that feeding site preference of the wintering geese was affected by distance from roosting site(reservoir), and feeding site was changed as a food sources decreasing by stay time of geese flock.

Macrozoobenthic Communities of the Deep Sea Sediments in the Northeastern Pacific Ocean (북동태평양 심해저 퇴적물에 서식하는 대형저서동물의 군집)

  • Choi, Jin-Woo;Kim, Dong-Sung;Hyun, Jung-Ho;Lee, Chang-Hoon
    • Ocean and Polar Research
    • /
    • v.26 no.2
    • /
    • pp.367-376
    • /
    • 2004
  • Macrobenthos were collected at 7 stations located from $5^{\circ}N$ to $10^{\circ}N$ with 1o interval along the longitude of $131^{\circ}W$ using a box corer with sampling area of $0.25\;m^2$ in July, 1999. In order to see the vertical distribution of macrobenthos in sediments, each subcore sample was divided into 5 layers with 1 cm interval up to 6 cm depth. Each subcore sample was sieved through 0.3 mm mesh screen and fixed with 10% Rose Bengal added formalin. A total of 22 faunal groups in 11 phyla were sampled and the average density was $959\;{\pm}\;584\;ind./m^2$. Foraminiferans comprised 34.8% of total specimens were the most abundant fauna, and followed by nematodes (27.5%), polychaete worms (15.7%), and benthic harpactoid copepods (10.4%). A latitudinal trend was shown in the distribution of macrobenthos; the maximum density of $1,832\;ind./m^2$ appeared at station N06 and the most poverished community occurred at station N09 with the density of $248\;ind./m^2$. The density of typical macrofaunal taxa except foraminiferans and nematods was $116\;ind./m^2$. In the vertical distribution of macrobenthos, more than 70% of macrobenthos occurred in the upper 2 cm layer, and upper 4 cm layer contained about 90% of macrofauna. Polychaete worms consisted of 22 families, and cirratulid and paraonid worms were dominant polychaete species. The prominant feeding guilds of polychaete worms were SDT (surface, descretely motile, tenaculate feeding) and SMX (surface, motile, non-jawed); they comprised more than 50% of polychaete abundance. These feeding guilds of polychaete worms suggests that the deep sea benthos should be well adapted the newly settled deposits from water column, but this should be clarified by the further studies.

Vertical Distribution and Feeding Ecology of the Mirror Dory Zenopsis nebulosa in the Southern Sea of Korea (우리나라 남해안에 서식하는 민달고기(Zenopsis nebulosa)의 수직분포와 식성)

  • Kim, Hye Rim;Kim, Jung Yun;Kim, Hee Yong;Choi, Gwang Ho;Choi, Jung Hwa
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.46 no.6
    • /
    • pp.973-976
    • /
    • 2013
  • We observed the vertical distribution and feeding ecology of the Mirror dory, Zenopsis nebulosa, in the Southern Sea of Korea from 2009 to 2013 using an otter trawl. The total length of captured individuals ranged from 11 to 48 cm. Individuals captured at greater depths were significantly larger than those from shallower sites. Fish abundance was significantly related to depth and temperature. We found that 89% of the total catch was obtained at depths between 80 and 140 meters. Prey organisms, including fish, crustaceans, and cephalopods, were found in Z. nebulosa stomachs. Fishes were the main prey items for all size groups. Cephalopods were consumed by individuals > 25 cm in length. Our findings suggested that the vertical distribution of Z. nebulosa varied with depth and temperature, and that the fish are carnivores.