• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.113-119
• /
• 2012

The two-step water splitting thermochemical cycle is composed of the T-R (Thermal Reduction) and W-D (Water Decomposition) steps. The mechanism of this cycle is oxidation-reduction, which produces hydrogen. The reaction temperature necessary for this thermochemical cycle can be achieved by a dish-type solar thermal collector (Inha University, Korea). The purpose of this study is to validate a water splitting device in the field. The device is studied and fabricated by Kodama et al (2010, 2011). The validation results show that the foam device, when loaded with $CeO_2$ powder, was successfully achieved hydrogen production under field conditions. Through this experiment, we can analyze the characteristics of the catalyst and able to determine which is more advantageous thing to produce hydrogen compared with previous experiment that used ferrite-device.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.377-382
• /
• 2011

Up to now, process design of multistage profile drawing from initial round material is performed through trial-and-error based on experience of industrial experts. This means the increase in production cost and excessive time consuming. In this study, process design program was developed for multistage profile drawing from initial round material. The program was made using VisualLISP. Therefore, the program can be operated by AutoCAD program. In order to verify the effectiveness of the program, two stage profile drawing process for producing heavy duty guide rail was design by using the program. In addition FE analysis and profile drawing experiment were performed. As a result, the program can be used in order to design profile drawing process design.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.189-192
• /
• 2006

The purpose of this study is to evaluate the welding distortion at the channel I butt SA weldment. In order to do it, the heat input model for the weldment was defined as combined heat source with the surface heat flux of gaussian mode and volume heat source uniformly distributed within weld groove on the basis of comparing the shapes of molten pool and temperature distribution obtained by FEA and experiment. The arc efficiency of SA welding for 2 dimensional FE analysis was determined as 0.85. The results of welding distortions at the weldment obtained by FEA and heat input conditions proposed have a good agreement with those obtained by experiment. Based on the results, it was suggested that the proper heat input model should be required to evaluate the welding distortion for weldment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.5
• /
• pp.502-507
• /
• 2009

Curvature extrusion process has several advantages in comparison to the conventional extrusion and bending process. In the curvature extrusion, the extruded part is directly bent during extrusion. Therefore, it does not need additional bending process after extrusion. In the curvature extrusion process, it is possible to produce curved extruded products that have a constant or various curvatures. It is essential that we predict the curvatures of the extruded product to meet the required curvatures. This paper proposed a theoretical model that can predict the curvature of extruded product produced by the curvature extrusion process. Using the proposed model the movement of guide tool that causes the bending of extruded product was controlled to produce the required curved automotive Al bumper back beam. The effectiveness of the proposed prediction model and the movement of guide tool were verified by the FE analysis and curved extrusion experiment.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.2
• /
• pp.50-57
• /
• 2019

This paper investigates deformation characteristics of gas pipeline using the in-plane bending experiment and finite element analysis of a pipe bend. The effect of the bending angle and internal pressure on the deformation characteristics is analyzed. The pipe bend used in this study is API 5L X65 (out diameter: 20 inch) material with the thickness of 11.9 mm. The maximum load, displacement at maximum load, angle and local strain of 90° pipe bend are obtained from the in-plane bending experiment. Comparison between FE results and experimental data shows overall good agreements. In addition, the deformation characteristics of 22.5° and 45° pipe bend are calculated using the finite element analysis. As a result, the effect of the bend angle on the deformation characteristics is discussed.

• Steel and Composite Structures
• /
• v.20 no.3
• /
• pp.599-621
• /
• 2016

In order to study the working mechanism of rectangular steel-concrete composite columns subjected to compression-bending load and further determine the seismic performance index, a bottom strengthened rectangular steel reinforced concrete (SRC) column with concealed steel plates and a bottom strengthened rectangular concrete filled steel tube (CFST) columns were proposed. Six column models with different configurations were tested under horizontal low cyclic loading. Based on the experiments, the load-bearing capacity, stiffness and degradation process, ductility, hysteretic energy dissipation capacity, and failure characteristics of the models were analyzed. The load-bearing capacity calculation formulas for a normal section and an oblique section of bottom strengthened rectangular steel-concrete composite columns were pesented and a finite element (FE) numerical simulation of the classical specimens was performed. The study shows that the load-bearing capacity, ductility, and seismic energy dissipation capacity of the bottom strengthened rectangular steel-concrete composite columns are significantly improved compared to the conventional rectangular steel-concrete composite columns and the results obtained from the calculation and the FE numerical simulation are in good agreement with those from the experiments. The rectangular steel-concrete composite column with bottom strengthened shows better seismic behavior and higher energy dissipation capacity under suitable constructional requirements and it can be applied to the structure design of high-rise buildings.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.531-535
• /
• 2013

The effect of heat-treatment temperature on the activity of catalysts was studied by investigating $N_2O$ decomposition reaction in Fe ion-supported BEA Zeolite. As a result of $N_2O$ decomposition reaction experiment, $N_2O$ decomposition activity significantly decreased as heat-treatment temperature of Fe/BEA catalyst increased. the shape and size of the particles of Fe/BEA catalyst following the rise of heat-treatment temperature did not display a significant change. But following the rise of the heat-treatment temperature, its surface area was significantly reduced. Also it was confirmed that as the heat-treatment temperature rose, the crystallization of ${\beta}$ structure was greatly reduced. And as heat-treatment temperature rose, while SiO structure either increased or did not exhibit much change, the structure of Fe bonded with lattice structure was speculated to decrease. From the stated results, it was concluded that the increase of heat-treatment temperature became the cause of the declined activity of catalysts by destruction of its ${\beta}$ structure of bonding aluminium and Fe atoms.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.4
• /
• pp.249-252
• /
• 1993

Water culture studies were conducted in the greenhouse with mulberry plants to investigate the nutrient uptake, especially Zn and Cu, under high phosphrous concentration. Mulberry plants were grown with five phosphorus levels(0, 0.2, 0.5, 2.0, 5.0 mM). Leaves and roots were analyzed for water content, total nitrogen, P, K, Ca, Mg, Fe, Mn, total Zn, soluble Zn, Cu, Cl, $NO_3HPO_4$ and $SO_4$. Dry matter increased upto 2.0mM phosphorus level, and then decreased. Water content, total nitrogen, P, K, and Fe in leaves increased with increasing phosphorus level. Total Zn content in leaves showed little change, whereas soluble Zn increased and Cu decreased with increasing phosphorus level. With increasing phosphous level. $SO_4$ and Cl decreased and then sharply increased above 2.0mM phosphorus. Lower uptake of Cu and higher uptake of $SO_4$ and Cl suggest a cause of mulberry yield decline with high accumulation of soil phosphorus.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.673-680
• /
• 2000

An experiment was conducted with day-old 300 commercial male broiler chicks (Arbor Acres$^{(R)}$) to evaluate the efficacy of crude phytase preparerations produced from a culture of Aspergillus ficcum. The experiment consisted of five dietary treatments; T1, com-soy control diet with 0.45% non-phytate phosphorus (NPP) for starter period and 0.35% NPP for grower period; T2, control - 0.1% NPP; T3, control 0.2% NPP; T4, T3+600 U of crude phytase (broth+cell); and T5, T3+600 U of crude phytase (broth). The body weight gain, feed intake, and feed/gain of chickens fed T1 diet was highest (p<0.01) among treatments. BW gain and feed intake of T4 and T5 were greater than those of T3 but were less than those of T1 and T2. T3 was highest in mortality among treatments. Decreasing the NPP level lowered availability of DM, crude ash, ether extract, crude fiber, Zn, and Fe but supplementation of crude phytase preparations improved the availability of these nutrients as well as those of Ca, P and Cu. Excretion of P and Cu significantly decreased as the NPP level in the diet decreased. Further reduction of P and Cu excretion and reduction of Ca, Mg and Fe excretion were achieved by supplementation of crude phytase preparations. The serum concentrations of Ca, P, Mg, Zn, Fe, and Cu were significantly increased by crude phytase supplementation. The weight and length of tibia, and contents of crude ash, Ca, P, Mg, and Zn were adversely affected by lowering NPP level but partially recovered by supplementation of crude phytase preparations. In conclusion, lowering NPP level in the broiler diet significantly depressed the performance. Supplementation of crude phytase preparations produced from Aspergillus ficuum could partially recover the depression.

• Animal Bioscience
• /
• v.35 no.3
• /
• pp.475-483
• /
• 2022

Objective: Methionine (Met) is involved in methyl group transfer besides protein synthesis. As the availability is limited and cost is high for synthetic Met, reductions in its inclusion in broiler diet may be possible by supplementing the low Met diets with methyl donors (MD) like betaine (Bet), folic acid (FA), vitamin B12 (B12), and biotin (Bio). An experiment was conducted to study the effects of supplementing the MD on performance (average daily gain [ADG], daily feed intake, feed efficiency [FE]), anti-oxidant variables, immune responses and serum protein concentration in broilers fed sub-optimal concentrations of dietary Met. Methods: Maize-soybean meal diet was used as control (CD). Different MD like Bet (0.2%), B12 (0.1 mg), FA (4 mg), or Bio (1.5 mg/kg) were supplemented to basal diet (BD) having no supplemental Met. The BD without MD was kept for comparison. Each diet was fed ad libitum to 10 replicates of 25 chicks in each from 1 to 42 d of age. Results: At the end of experiment, the ADG in MD group was higher than BD and lower than CD. The FE improved with FA or Bet compared to the BD. Breast meat weight was higher in Bet compared to the BD, while it was intermediate between BD and CD in other groups. The lipid peroxidation reduced with Bio, B12, or Bet, while the glutathione peroxidase activity improved with Bio or B12 compared to the BD. Lymphocyte proliferation improved with Bet compared to the BD. The serum protein concentrations increased with FA, Bio, or Bet compared to those fed BD. Conclusion: It can be concluded that the ADG can be improved partially with supplementation of MD while the FE improved with FA or Bet. Some MD also reduced the stress indices and improved immune responses compared to the BD fed broilers.