• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.149-157
• /
• 2012

Experiments for As(V) removal using synthesized $Ca{\cdot}Al$-monosulfate was performed from the water contaminated with arsenate. Monosulfate is known as LDHs (Layered Double Hydroxides) which is one of the anionic clay minerals. Monosulfate was synthesized mixing $C_3A$ (tricalcium aluminate), gypsum (calcium sulfate), and water with an intercalation method. The product form the synthesis was characterized by FE-SEM, WDXRF, PXRD, and FT-IR. Experiments with different doses of monosulfate were carried out for kinetic. As a result of experiment, the concentration of As(V) was reduced from 0.67 mM to 0.19 mM (0.67mM of monosulfate) and 0.178 mM (1.34 mM of monosulfate). The concentration of sulfate was increased with As(V) decrease. The result of PXRD showed that the d-spacing of inter layer ($d_{003}$ peak) was shifted from 8.927 ${\AA}$ to 8.095 ${\AA}$ because the sulfate in the inter layer of monosulfate was exchanged arsenate with water molecules bonded. From the FT-IR results, a new single band (800 cm-1) was observed after the reaction of monosulfate and As(V). The arsenic removal can be regarded as anion exchange mechanism that is one of the characteristics of LDHs from the results of PXRD and FT-IR analysis.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.

• Advances in materials Research
• /
• v.1 no.4
• /
• pp.299-310
• /
• 2012

This article describes the synthesis of a novel N-substituted pyrrole monomer containing an azobenzene group. The 2-[N-ethyl-N-[4-[(4-nitrophenyl) azo]-phenyl] amino] ethyl-3-chloropropionate (RedII) compound was synthesized via reaction of 4-nitro-4'-[N-ethyl-N-(2-hydroxyethyl)-amino] azobenzene (RedI) and 3-chloropropionic acid. RedII was reacted with the potassium salt of pyrrole then 2-[N-ethyl-N-[4-[(nitro phenyl) azo] phenyl] amino] ethyl-N-pyrrolyl propionate (Py-RedII) was prepared. Chemical polymerization of Py-RedII and copolymerization of Py-RedII with pyrrole carried out using $FeCl_3$. Poly (2-[N-ethyl-N-[4-[(nitro phenyl) azo] phenyl] amino] ethyl-N-pyrrolyl propionate) (PPy-RedII) was characterized by UV, IR, $^1HNMR$, $^{13}CNMR$ spectroscopies. Electropolymerization of Py-RedII and electroco-polymerization of Py-RedII and pyrrole were studied using conventional three electrodes system, Ag/AgCl reference electrode, platinum counter electrode and GC disk working electrode. Scanning electron microscopy (SEM), thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC) were used for thermal and rheological studies. The TGA curve of PPy-RedII demonstrated a high thermal stability up to 200°C and its DSC thermogram showed two endothermic peaks at 88 and $122^{\circ}C$. The glass transition temperature of the polymer was found to be above the room temperature. Electrical conductivities of PPy-RedII and it's copolymer with pyrrole (PPy-RedII-co-Py) were studied by the four-probe method and produced conductivities of $7.5{\times}10^{-4}$ and $6.5{\times}10^{-3}Scm^{-1}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.44-53
• /
• 1994

A study on the iron electrode which is a good material for alkaline battery because of its superior characteristics including high theoretical capacity density, low toxicity, low cost and inexhaustible supply was performed to develop high performance nickel-iron secondary battery. The characteristics of chrage-discharge reaction were examined by cyclic voltammetry technique SEM and XRD analysis. The capacity of the test electrodes was determined by the costant current charge-discharge method. It was found that the purity and particle size of iron material were the major determinant factors of electrode capacity. With the addition of $Na_2S$ into the electrolyte the capacity of electrode was increased about 20 % caused by the prevention of passivation and the increase of hydrogen overpotential. The stability and capacity of electrode were increased with the use of Ni-fibrex and foamed Ni collectors and also depended on the sintering temperature. The capacity of electrode was 350 mAh/g(0.2 C) which corresponded to 36% utility.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.4
• /
• pp.243-251
• /
• 2016

Longitudinally structural cracks are sometimes observed in the pavement on steel plate deck bridges because traffic truck loadings can cause large local deformations of the thin deck plate stiffened by longitudinal and transverse beams. In this study, an improved finite strip method using flat-shell strip, prism, and link elements is presented to investigate local deformations of steel decks with pavements in which flexural and torsional stiffness effects of thin floor beams are rigorously taken into account. A simplified deck model extracted from steel plate-girder bridges is analyzed using the developed FSM and the commercial FE program, ABAQUS and also, their numerical results are compared and discussed.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.150-155
• /
• 2014

Polycaprolactone (PCL) is a synthetic biodegradable polymer with excellent mechanical properties. $TiO_2$ (titanium dioxide) has a hydrophilic, high density and excellent biocompatibility. In this work, we produced three-dimensional porous scaffolds with PCL and $TiO_2$ nanoparticles using a salt-leaching method. Physical properties of the scaffolds were analyzed by FE-SEM, FTIR, TGA and compressive strength. Interestingly, the addition of $TiO_2$ nanoparticles decreased the water absorption and swelling ratio of the porous scaffolds. However, the compressive strength was increased by $TiO_2$. CCK-8 assay, which is generally used for the analysis of cell growth, shows that $TiO_2$ nanoparticles have no cytotoxicity. Taken together, we suggest that the PLC/$TiO_2$-scaffold can be used for biomedical applications.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E4
• /
• pp.203-213
• /
• 2002

Receptor modeling is one of statistical methods to achieve reasonable air pollution strategies. In order to maintain and manage ambient air quality, it is necessary to identify sources and to apportion its sources for ambient particulate matters. The main purpose of the study was to survey seasonal trends of inorganic elements in the coarse and fine particles. Second, this study has attempted emission sources qualitatively by a receptor method, the PMF mo-del. After that. both PMF (positive matrix factorization) model and TTFA (target transformation factor analysis) model were applied to compare and to estimate mass contribution of coarse and fine particle sources at the receptor. A total of 138 sets of samples was collected from 1989 to 1996 by a low volume cascade impactor with 9 size fraction stages at Kyung Hee University in Korea. Sixteen chemical species (Si, Ca, Fe, K, Pb, Na, Zn, Mg, Ba, Ni, V, Mn, Cr, Br, Cu. Co) were characterized by XRF. The study result showed that the weighted arithmetic mean of coarse and fine particles were 51.3 and 54.4 $\mu\textrm{g}$/㎥, respectively. Contribution of both particle fractions were esti-mated using TTFA and PMF models. The number of estimated sources was seven according to TTFA model and 8 according to PMF model. Comparison of TTFA and PMF revealed that both methodologies exhibited similar trends in their contribution pattern. However, large differences between contributions were observed in some sour-ces. The results of this study may help to suggest control strategies in local countries where known source profiles do not exist.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.337-337
• /
• 2012

Dye sensitized solar cell (DSSC) having high efficiency with low cost was first reported by Gr$\ddot{a}$tzel et al. Many DSSC research groups attempt to enhance energy conversion efficiency by modifying the dye, electrolyte, Pt-coated electrode, and $TiO_2$ films. However, there are still some problems against realization of high-sensitivity DSSC such as the recombination of injected electrons in conduction band and the limited adsorption of dye on $TiO_2$ surface. The surface of $TiO_2$ is very important for improving hydrophilic property and dye adsorption on its surface. In this paper, we report a very efficient method to improve the efficiency and stability of DSSC with nano-structured $TiO_2$. Atmospheric plasma system was utilized for nitrogen plasma treatment on nano-structured $TiO_2$ film. We confirmed that the efficiency of DSSC was significantly dependent on plasma power. Relative in the $TiO_2$ surface change and characteristics after plasma was investigated by various analysis methods. The structure of $TiO_2$ films was examined by X-ray diffraction (XRD). The morphology of $TiO_2$ films was observed using a field emission scanning electron microscope (FE-SEM). The surface elemental composition was determined using X-ray photoelectron spectroscopy (XPS). Each of plasma power differently affected conversion efficiency of DSSC with plasma-treated $TiO_2$ compared to untreated DSSC under AM 1.5 G spectral illumination of $100mWcm^{-2}$.

• Journal of the Korean Society of Food Culture
• /
• v.16 no.4
• /
• pp.269-275
• /
• 2001

The present research was designed to collect recipe of set up a standard recipe and analyze the nutrients of broiled black goat meat (a kind of native local foods in Busan and south province). The results of the study are summarized as follows. The recipe for goat(lamb) meat was recorded in Sanlimkyounggae and Jungbosanlimkyounggae between 1715 and 1827. The goat meat was explained as food for health, rejuvenation and recuperation Since late 1800, it has been utilized for such use. The flavor of broiled black goat meat is influenced by seasonings, fruit juice, heating treatment and cooker. And it also could be affected by the method of slaughter and the sex of the goat. There are lot of element in seasoning. Red pepper paste, garlic and ginger holdback the bad smell and make the taste better. Onion help to retain the water and improve the flavor. Starch syrup, sugar and sesame oil make the meat smoother, glossier and more tasty. The meat is usually roasted on grill over charcoal. It helps to remove or suppress the bad smell and make the taste better. Softness and scent of the meat depend largely on the way to butcher. Female goat meat tastes smoother and smells better. Fruit juice also improve the softness of the meat. Energy per 100g of the 'broiled black goat meat' is 170kcal. There are protein (23g), fat(2.4g), Ca(159mg), Fe(1.1mg) and so on. Amino acid is mainly comprised of essential amino acid such as cystine, lysine, leucine, and arginine. Fatty acid consists primarily of unsaturated fatty acid like oleic acid, linoleic acid.