• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.158-161
• /
• 2006

In this paper, we deal with EMI Analysis on Microstrip with Defected Ground plane. Specially, we investigate reflection, transmission, crosstalk, radiated emission on Microstrip with Defected Ground plane structure. And investigates undesired effects on various defected ground plane such as ground with split, slot, short end and open end gap. To analyze reflection, transmission and crosstalk of microstrip with defected ground plane, we used concept of the microstrip to slot line transition model. Besides, investigate radiated emission using FDTD Commercial tools such as CST MW

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.37-38
• /
• 2012

In this research, the application of PUF modeling which is configured to be doped oxide material on Si substrate and this oxide material is to prevent corrosion of the security chip device. It is to design device replication technology through applying the electromagnetic formulation and its analysis of a device and find ways to PUF design.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.169-174
• /
• 2005

In this paper, we proposed a new algorithm of the inverse scattering for the reconstruction of unknown dielectric scatterers using the finite-difference time-domain method and the design sensitivity analysis. We introduced the design sensitivity analysis based on the gradient for the fast convergence of the reconstruction. By introducing the adjoint variable method for the efficient calculation, we derived the adjoint variable equation. As an optimal algorithm we used the steepest descent method and reconstructed the dielectric targets using the iterative estimation. To verify our algorithm we will show the numerical examples for the two-dimensional $TM^2$ cases.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.542-544
• /
• 2002

This paper proposes a wavelength sensor based on the optical directional coupler. The finite-difference time-domain (FDTD) is used in analysis of the field intensity of tile light propagating thorough the structure. The device with tile width of 0.4 $\mu\textrm{m}$ and the thickness of 0.4 $\mu\textrm{m}$, which corresponding with the coupling length of 40$\mu\textrm{m}$, would provide tile linear relationship between the coupling efficiency against the wavelength. The device can sense the wavelength in a range between 1.5$\mu\textrm{m}$ and 1.6$\mu\textrm{m}$, with continuous resolution. The wide wavelength could be also done be paralleling th light to a number of wavelength-sensing modules with particularly required bands. Therefore, it could be employed as the wavelength sensing for most optical communications, optoelectronics, laser applications and etc.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.19-24
• /
• 1995

The majority of problems to which FDTD is being applied involve open structure which require the appropriate scheme to terminate the computational domain. In particular, for the propagation problem of the outgoing waves, a certain type of boundary condition needs to be applied on outer boundaries of the computational domain to generate no reflected waves. In this paper, a new simple technique is presented, which allows the reduced computation time and excellent absorbing characteristics for normal and oblique incident waves on outer boundaries. To illustrate the validity of this method, a numerical calculation for monopole antenna is carried out and the results are compared to measured data. The time-domain properties for circular patch antennas are investicated.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.60-67
• /
• 1997

This paper presents a 3-D finite difference time domain (FDTD) method used for indoor propagation simulations where the electromagnetic wav eis uniformly excited on th eone of the wall in a building and affected by an indoor obstacles. In cases of simulation and measurement, the frequency of 851 MHz is used. The conductivities of walls, floor, ceiling and indoor obstacles are measured and used for simulations. These simulations are carried out using different boundary condition such as mur's absorbing boundary condition (ABC) and perfectly matched layer (PML) technique. The PML technique is found to be well-suited to this analysis because of it's smaller computational domain than mur's ABC. The measured signal strengths are compared to simulated values with good agreement.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.35-37
• /
• 2003

본 논문에서는 진행파형 전계 흡수 광 변조기를 3차원 FDTD를 이용하여 도파관의 폭과 진성영역의 두께 그리고 N-도핑층의 도핑수준을 변화시키면서 최적화된 구조를 설계하였다. 제작된 소자의 구조는 진성영역의 두께는 $0.9{\mu}m$, 도파관의 폭은 $6{\mu}m$이며 전체 소자의 길이는 $700{\mu}m$ 이다. 제작된 소자의 마이크로파 특성을 측정하였으며 마이크로파 특성과 광 특성을 사용하여 주파수 응답특성을 추정하였다. 소자의 길이가 $400{\mu}m$ 일 때 17.8 GHz의 주파수 응답특성을 얻었다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.70-72
• /
• 2003

본 논문에서는 설계민감도 해석법과 위상최적화 기법을 사용하여 산란체의 물질상수 분포를 알기위한 수치해석 알고리즘을 제안하였다. 설계민감도 해석법과 보조변수법을 사용하여 복소 유전율에대한 목적함수의 미분정보를 계산하였고 이 민감도 정보를 통해 물질정보를 최적화 하였다. 최적화 기법으로 최대경사법(Steepest descent Method)을 사용하였으며 이 제안한 해석 기법을 2차원 TMz 모델에 적용함으로써 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.128-131
• /
• 2000

This paper describes design for dual-linear polarization antenna using EMC(electromagnetic-coupled) dipole. EMC dipole has a simple element structure and it is fed by microstrip line. Vortical and horizontal polarization are determined by structure of dipole fed by microstrip line. FDTD Method is used for an analysis of antenna element. Length, width, height and offset of dipole are designed for 1-element antenna. Resonant length of diploe differs from the calculated value by a formula because of coupling effect of dipole and feed line. Radiation Power is controlled by the offset of dipole. In prectical fabrication of antenna array, a constant height of dipoles is required. Therefore, the teflon plate with height of 0.8 mm is considered in antenna element design for the vertical polarization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.863-864
• /
• 2009