• 제목/요약/키워드: FDR

검색결과 166건 처리시간 0.028초

데이터 기반의 도로구간별 운전자의 통행행태를 고려한 교통사고지표 개발 (Development of Traffic Accident Index Considering Driving Behavior of a Data Based)

  • 이숭봉;장현호;천승훈;백승걸;이영인
    • 대한교통학회지
    • /
    • 제34권4호
    • /
    • pp.341-353
    • /
    • 2016
  • 고속도로는 중 장거리 차량 통행을 담당하고 있으며, 공공기관들의 지방이전 등으로 인해 직장과 거주지 간의 거리가 멀어짐에 따라 운전자들의 통행거리는 증가 추세를 보이고 있다. 이러한 이유로 고속도로에서는 피로나 졸음으로 인한 운전자요인 사고의 비중이 매우 높다. 하지만 기존의 사고예측 연구에서는 주로 도로요인, 환경요인, 차량요인 등 외적인 조건만을 고려하였을 뿐 도로구간별 운전자의 통행행태를 고려하지 못하였다. 본 연구에서는 대용량 내비게이션 경로자료를 활용하여 통행행태기반의 사고지표(운전피로도지표)를 제안하고, 교통사고와의 관계를 살펴보았다. 분석결과 개발된 지표와 교통사고와는 높은 상관성을 보이는 것으로 나타났으며, 이를 통해 시설물 위주에서 통행행태기반으로 교통사고 예측연구의 패러다임 변화가 필요함을 확인할 수 있었다. 본 연구에서 제안한 지표는 다양한 분야에서 활용이 가능할 것이다. 교통사고(졸음, 부주의운전 등)를 사전에 방지하기 위한 정보제공, 고속도로 안전진단 핵심요소기술로의 활용, 휴게소 및 졸음쉼터 입지 우선순위 선정 시, 피로한 구간에 대하여 운전자에게 주의환기를 위한 방법(노면요철, 그루빙 등)을 적용해야하는 구간 선정 시 활용이 가능할 것이다.

조기 알츠하이머 치매의 뇌포도당 대사 감소 평가에서 오류발견률 조절법의 적용 (Application of False Discovery Rate Control in the Assessment of Decrease of FDG Uptake in Early Alzheimer Dementia)

  • 이동수;강혜진;장명진;조상수;강원준;이재성;강은주;이강욱;우종인;이명철
    • 대한핵의학회지
    • /
    • 제37권6호
    • /
    • pp.374-381
    • /
    • 2003
  • 목적: 오류발견율 조절법을 PET 영상분석에 이용하면 다중비교에 따르는 위양성율을 줄이면서 동시에 검정력을 높일 수 있다. 조기 알츠하이머 치매 환자에서 오류발견율 조절법을 적용하였을 때와 비보정역치, 무작위 가우스장 보정역치를 적용하였울 때 FDG PET에 나타난 포도당 대사 감소영역이 어떻게 달라지는지 조사하였다. 방법: 28명의 평균 66세 (${\pm}7$)인 조기 알츠하이머성 치매 환자와 연령을 맞춘 18명의 정상인($68{\pm}6$세)의 FDG PET 영상을 SPM99 소프트웨어로 분석하였다. 환자군과 정상군의 차이와 각 환자와 정상군의 차이를 각각 비보정 역치 p값 0.001, 무작위장 보정 역치 p값 0.001, 오류발견율 조절법에 의한 오류발견율 0.001일 때을 정하여 이 세 통계적 역치에서 각각 뇌 포도당 대사감소 영역을 결정하였다. 결과: 집단 분석결과 비보정 역치를 사용하였을 때 가장 넓은 영역에서, 보정역치를 사용하였을 때 가장 좁은 영역에서, 오류발견율 조절법을 적용하였을 때 중간크기의 영역에 대사가 감소하였다. 개인분석결과 비보정 역치 경우 발견된 대사감소 화소보다 오류발견율 조절시 많은 화소가 나타난 경우(8/28, 29%)와 보정 역치 경우와 오류발견율 조절시에는 대사감소 부위가 나타나지 않고 비보정 역치 경우에만 넓은 부위에 대사감소부위가 나타난 경우(6/28, 21%), 그리고 보정역치보다 오류 발견율 조절시에 훨씬 많은 화소가 이상부위로 나타나서 비보정역치 경우에 근접하는 넓이를 찾을 수 있는 경우(14/28 50%)이었다. 결론: 조기 알츠하이머 치매 환자의 FDG PET을 오류발견율 조절법으로 분석한 결과 집단분석이나 개인분석 모두 대사감소부위를 잘 찾을 수 있었다. 집단의 크기가 작은 환자의 집단분석이나 특히 개인분석의 경우 오류발견율 조절법을 이용하여 FDG PET을 분석하는 것이 좋을 것이라 제안한다.

FDR(Frequency Domain Reflectometry)센서를 이용한 코코넛 코이어 배지내 수분특성 측정 (Measuring Water Content Characteristics by Using Frequency Domain Reflectometry Sensor in Coconut Coir Substrate)

  • 박성태;정금향;유형주;최은영;최기영;이용범
    • 생물환경조절학회지
    • /
    • 제23권2호
    • /
    • pp.158-166
    • /
    • 2014
  • 본 연구는 FDR(Frequency Domain Reflectometry) 센서를 이용하여 코코넛 코이어 배지에서 급액 공급관리에 적합한 수분측정 장소를 찾고 보다 정밀한 측정 방안을 제시하기 위한 기초 실험으로 급액구에서의 측정거리와 위치 그리고 노이즈 필터 사용에 따른 수분변화와 편차를 조사하였다. 시판되는 코코넛 코이어 슬라브 중 coir dust와 chip의 함량이 10:0, 7:3, 5:5, 3:7인 배지들을 사용했고 배지 윗면과 측면에 급액구부터 5, 10, 20, 30cm의 거리를 두어 센서를 설치하여 동일한 급액을 공급한 후 수분변화를 측정하였으며, 노이즈 필터 사용 여부에 따른 수분변화는 내부가 균일한 인공토양인 글라스 비드를 포수하여 설치간격 0, 6, 12, 21cm에서 측정하였다. 배지조성에 상관없이 센서가 급액구에 가까울수록 높은 수분함량 증가를 나타내었다. 배지 조성 3:7과 10:0에서는 윗면과 측면 측정에 따른 배지 수분함량 변화 특성이 차이를 보이지 않았으나 5:5와 7:3에서는 윗면을 측정시 보다 높은 수분함량 증가를 보였다. Chip 함량이 상대적으로 많은 3:7 배지에서는 다른 배지들보다 수분함량 증가가 낮았다. 노이즈 필터를 사용하게 되면 측정치 변동과 편차가 감소하였다. 따라서, 코코넛 코이어 배지에서 FDR센서를 이용해 배지 수분 계측시 급액구에 가까운 거리의 윗면을 측정하는 것이 급액 이후 배지내 변화를 관측이 용이하다. 다수의 센서를 사용하여 측정할 경우에는 센서간 간격을 21cm 이상으로 넓게 설치하도록 하며, 노이즈 필터는 측정 안정성 향상을 위해 사용을 권장한다.

Improving Physical-Layer Security for Full-duplex Radio aided Two-Way Relay Networks

  • Zhai, Shenghua;An, Jianping
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권2호
    • /
    • pp.562-576
    • /
    • 2020
  • The power allocation optimization problem is investigated for improving the physical-layer security in two-way relaying networks, where a full-duplex relay based half-jamming protocol (HJP-FDR) is considered. Specially, by introducing a power splitter factor, HJP-FDR divides the relay's power into two parts: one for forwarding the sources' signals, the other for jamming. An optimization problem for power split factor is first developed, which is proved to be concave and closed-form solution is achieved. Moreover, we formulate a power allocation problem to determine the sources' power subject to the total power constraint. Applying the achieved closed-form solutions to the above-mentioned problems, a two-stage strategy is proposed to implement the overall power allocation. Simulation results highlight the effectiveness of our proposed algorithm and indicate the necessity of optimal power allocation.

An experimental approach for estimating the porosity and effective porosity of porous media by permittivity methods

  • Nishigaki M.;Komatsu M.;Kim M.-I.
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.703-710
    • /
    • 2003
  • In the sub-surface environments, detection of the movement of contaminant substances and recharge of groundwater by rainfall are very important factors which contain porosity and effective porosity of porous media. In this paper, the applicability of permittivity methods and proposed dielectric mixing models (DDMs) are discussed. This study showed that the ratio of effective porosity to porosity of Toyoura and River sands were 0.856 and 0.843. From the relationships between the relative porosity and effective porosity, all measured values can be confirmed to outside the range to about 0.800 for Toyoura and River sands under all experiments by FDR and FDR-V systems. In the study, this permittivity equipment can be considered to be good enough to measure determining the physical parameters of saturated soils. Consequently, this permittivity method can be contributed to estimate a porosity and effective porosity of saturated porous media because it is easy and instantaneous than previous in-situ methods.

  • PDF

A Comparative Study on Frequency Estimation Methods

  • Kim, Yoon Sang;Kim, Chul-Hwan;Ban, Woo-Hyeon;Park, Chul-Won
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권1호
    • /
    • pp.70-79
    • /
    • 2013
  • In this paper, a comparative study on the frequency estimation methods using IRDWT (Improved Recursive Discrete Wavelet Transform), FRDWT(Fast Recursive Discrete Wavelet Transform), and GCDFT(Gain Compensator Discrete Fourier Transform) is presented. The 345[kV] power system modeling data of the Republic of Korea by EMTP-RV is used to evaluate the performance of the proposed two kinds of RDWT(IRDWT and FRDWT) and GCDFT. The simulation results show that the frequency estimation technique based on FRDWT could be the optimal frequency measurement method, and thus can be applied to FDR(Fault Disturbance Recorder) for wide-area blackout protection or frequency measurement apparatus.

Multiple Testing in Genomic Sequences Using Hamming Distance

  • Kang, Moonsu
    • Communications for Statistical Applications and Methods
    • /
    • 제19권6호
    • /
    • pp.899-904
    • /
    • 2012
  • High-dimensional categorical data models with small sample sizes have not been used extensively in genomic sequences that involve count (or discrete) or purely qualitative responses. A basic task is to identify differentially expressed genes (or positions) among a number of genes. It requires an appropriate test statistics and a corresponding multiple testing procedure so that a multivariate analysis of variance should not be feasible. A family wise error rate(FWER) is not appropriate to test thousands of genes simultaneously in a multiple testing procedure. False discovery rate(FDR) is better than FWER in multiple testing problems. The data from the 2002-2003 SARS epidemic shows that a conventional FDR procedure and a proposed test statistic based on a pseudo-marginal approach with Hamming distance performs better.

해수담수화 공정에서 역삼투막의 거동에 영향을 주는 요인 (Factors related to Performance of Reverse Osmosis Membrane in Seawater Desalination Process)

  • 박준영;홍성호;김지훈;정우원;남종우;김영훈;이창하;김형수
    • 상하수도학회지
    • /
    • 제25권2호
    • /
    • pp.171-176
    • /
    • 2011
  • Organic matters that comprise a tiny part of seawater generally occur over 50% of membrane fouling in Reverse Osmosis Process. This study evaluates Foundation efficiency of reverse osmosis membranes under brackish and seawater conditions and resistance of organic fouling. Moreover, analyzing the membrane surface through roughness, contact angle and zeta potential results in roughness and contact angle are proportional to flux decline rate (FDR), yet FDR has high value when zeta potential is low level. Furthermore, with various membrane fouling of different raw water conditions, the flux tends to improve when pH value is high and raw water which is complex with organic and cation pollutes membrane faster than organic separated raw water condition.

Optimal Duplex Selection for Decode and Forward Relay Systems with Power Allocation

  • Kwon, Taehoon;Lim, Sungmook
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권12호
    • /
    • pp.5347-5360
    • /
    • 2016
  • In decode and forward relay systems, choosing the duplex mode is an important factor to the performance. To satisfy the performance requirement, self-interference must be mitigated for the full-duplex relay (FDR), and the resource efficiency must be increased for the half-duplex ratio (HDR). Therefore, if a wise scheme to consider these two factors exists, decode and forward relay systems are used more effectively. This study proposes a new duplex selection scheme for decode and forward relay systems. The proposed duplex selection scheme chooses the better duplex mode according to the channel statistical conditions with optimal power allocation. The simulation results show that the proposed duplex scheme with optimal power allocation has lower outage probability than the FDR and the HDR.

Casper를 이용한 키 분배 프로토콜 명세 (A Key Distribution Protocol Specification using Casper)

  • 이성민;김태윤
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2000년도 제13회 춘계학술대회 및 임시총회 학술발표 논문집
    • /
    • pp.1163-1165
    • /
    • 2000
  • 최근 보안 프로토콜의 안전성을 검증하는 연구가 활발히 진행되고 있다. 이러한 연구 중 대표적인 방법이 CSP[1]와 FDR[2]과 같은 정형 기법을 이용하여 프로토콜을 분석하는 것이다. 이 방법은 매우 성공적으로 프로토콜의 문제점을 발견하고 안전성을 검증할 수 있었다. 하지만 CSP를 이용하여 프로토콜을 명세하는 것은 숙달된 전문가에게만 적합하고 시간이 오래 걸린다는 문제점을 갖는다. 이러한 문제점을 해결하여 좀 더 쉽게 프로토콜을 명세하여 CSP 코드를 생성해주는 캐스퍼(Casper)[3]가 제안되었다. 본 논문에서는 세 개의 메시지 교환을 통해서 키를 분배하는 키 분배 프로토콜을 제안하고 캐스퍼를 이용하여 제안한 프로토콜에 대한 정형 명세를 한다. 명세된 스크립트는 캐스퍼를 이용하여 FDR의 입력 파일이 되는 667 라인의 CSP 코드를 생성하였다. 캐스퍼를 이용한 정형 명세는 좀 더 편리하게 프로토콜을 명세할 수 있고 명세 시 발생할 수 있는 에러를 줄임으로써 신뢰성을 높일 수 있다.

  • PDF