• 대한기계학회논문집A
• /
• 제41권6호
• /
• pp.477-482
• /
• 2017

FDM 방식은 열가소성 필라멘트 가열을 이용하고 압출하여 적층하는 방식이다. FDM 프린팅 공정은 정밀도와 표면 거칠기가 고르지 않지만, 비용과 출력시간에 많은 이점을 갖는다. 최근 몇 년 동안, FDM 프린팅 공정의 정확성을 향상시키는 연구가 많이 진행되었으나, 개방형 3D 프린터의 정밀도 향상에 관한 연구는 미진한 실정이다. 본 연구에서는 개방형의 베드 개선을 통해 상기 출력부의 온도 차이를 감소시키는 방법을 제안한다. 전통적으로, 폐쇠 된 챔버 내에서 FDM프린팅 공정은 수행된다. 그러나, 이 연구에서는 온도차이를 줄이기 위해 개방형 히팅 시스템을 사용하였다. FDM 방식의 프린팅 공정을 FEM 시뮬레이션을 이용하여 수행하였으며, 실험을 통하여 결론을 도출하였다.

• 한국의류산업학회지
• /
• 제20권3호
• /
• pp.353-359
• /
• 2018

In this study, fused deposition modellig(FDM) 3D printing technology has been applied directly to polyester voil fabric to produce 3D printed lace/voil composite fabrics. A stereolithograpy(STL) file with a lace type 3D modelling under the various thickness were prepared and transformed into a g-code file using a g-code generator. The extrusion conditions for FDM 3D printing were controlled by 50mm/s of nozzle speed, $235^{\circ}C$ of nozzle temperature, $40^{\circ}C$ of heating bed temperature. 3D printed lace/voil composite fabriscs manufactured by 3D printing based on FDM using a thermoplactic polyurethane(TPU) filaments were obtained. To evaluate the mechanical properties and washability of the fabricated 3D printed lace/voil composite fabric, KES-FB system test, washing fastness test and dry cleaning resistance test were conducted. As 3D printing thickness increased, KOSHI, NUMERI, and FUKURAMI of 3D printed lace/voil composite fabric increased. From the results of the primary hand value test, 3D printed lace/voil composite fabrics were confirmed to be applicable to women's summer garments. As a result of the washability and dry cleaning resistance test of the 3D printed lace/voil composite fabrics, all samples were graded 4-5.

• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.839-844
• /
• 2017

최근 3차원 프린팅 기술은 비약적으로 발전하여 쾌속조형기술의 대명사가 되고 있다. FDM 방식의 3D프린터는 쾌속조형에 사용되는 가장 일반적인 프린터이지만, 열에 취약하고, 출력물의 표면이 매끄럽지 못하는 등의 문제를 가지고 있다. 본 논문에서는 FDM방식의 3D프린터로 ABS재질의 시편을 제작하였고, 아세톤에 시편을 담그는 방식으로 후처리를 수행하였다. 공정시간을 변수로 후처리를 진행하였으며, 처음 5초의 후처리 시간동안에는 시편의 표면조도가 급격하게 개선되는 결과를 획득하였으며, 5초 이후에는 표면조도의 변화정도가 미미하였다. 또한, 이러한 후처리 공정은 적지만 시편의 인장강도와 파단변형률을 상승시키는 결과를 나타내었다.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.1-8
• /
• 2017

This paper concerns the possibility of 3D printing reverse idle gears for tractor transmission. For the purposes of this experiment, idle gears were manufactured using a SLA 3D printer, FDM 3D printer, and through machining. The accuracy of the idle gears produced in these three different ways were evaluated by the properties of their outer diameter, inner diameter, roundness, concentricity, parallelism, span, backlash, and gear grade. The tooth characteristics of the idle gears were evaluated by their profile, lead, and the pitch of the gears. The results of this experiment determined that the surface conditions created by the finishing process had a significant impact on the dimensional accuracy of the gears and the characteristics of their teeth.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.143-148
• /
• 2018

3D printing has been expanding beyond the bio/nano field to the automobile and aviation industries. 3D-printing technology has to overcome real problems to have economic value compared to its unlimited usability. Typically, the difference in mechanical strength along the lamination direction requires sufficient research to ensure reliability. In this paper, we study the anisotropic properties of ABS based on the stacking method of FDM 3D printing. Specifically, the mechanical properties of ABS material are determined through a tensile test and 3-point bending test, and the in-plane orthotropic properties are ascertained.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.63-71
• /
• 2020

Recently, to improve convenience, flexible electronics are quickly being developed for a number of application areas. Flexible electronic devices comprise characters such as being bendable, stretchable, foldable, and wearable. Effectively manufacturing flexible electronic devices requires high efficiency, low costs, and simple processes for manufacturing technology. Through this study, we enabled the rapid production of multifunctional flexible bending sensors using a simple, low-cost Fused Deposition Modeling (FDM) 3D printer. Furthermore, we demonstrated the possibility of the rapid production of a range of functional flexible bending sensors using a simple, low-cost FDM 3D printer. Accurate and reproducible functional materials made by FDM 3D printers are an effective tool for the fabrication of flexible sensor electronic devices. The 3D-printed flexible bending sensor consisted of polyurethane and a conductive filament. Two patterns of electrodes (straight and Hilbert curve) for the 3D printing flexible sensor were fabricated and analyzed for the characteristics of bending displacement. The experimental results showed that the straight curve electrode sensor sensing ability was superior to the Hilbert curve electrode sensor, and the electrical conductivity of the Hilbert curve electrode sensor is better than the straight curve electrode sensor. The results of this study will be very useful for the fabrication of various 3D-printed flexible sensor devices with multiple degrees of freedom that are not limited by size and shape.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.81-88
• /
• 2020

In this paper, the performances of the electrical characteristics of the Fused Deposition Modeling (FDM) 3D-printed flexible resistance sensor was evaluated. The FDM 3D printing flexible resistive sensor is composed of flexible-material thermoplastic polyurethane and a conductive PLA (carbon black conductive polylactic acid) polymer. While 3D printing, polymer filaments heat up quickly before being extruded and cooled down quickly. Polymers have poor thermal conductivity so the heating and cooling causes unevenness, which then results in internal stress on the printed parts due to the rapidity of the heating and cooling. Electrical resistance measurements show that the 3D-printed flexible sensor is unstable due to internal stress, so the 3D-printed flexible sensor resistance curve does not match the increases and decreases in the displacement curve. Therefore, annealing was performed to eliminate the mismatch between electrical resistance and displacement. Annealing eliminates residual stress on the sensor, so the electrical resistance of the sensor increases and decreases in proportion to displacement. Additionally, the resistance is lowered in comparison to before annealing. The results of this study will be very useful for the fabrication of various devices that employ 3D-printed flexible sensor that have multiple degrees of freedom and are not limited by size and shape.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.53-60
• /
• 2018

In this paper, the effect of different 3D printing parameters including laminated angle and annealing temperature is observed their effect on FDM conductive 3D printing. In FDM 3D printing, a conductive filament is heated quickly, extruded, and then cooled rapidly. FDM 3D Print conductive filament is a poor heat conductor, it heats and cools unevenly causing the rapid heating and cooling to create internal stress. when the printed conductive specimens this internal stress can be increase electrical resistance and decrease electrical conductivity. Therefore, This experiment would like to use annealing to remove internal stress and increase electrical conductivity. The result of experiment when 3D printing conductive specimen be oven cooling of annealing temperature $120^{\circ}C$ electrical resistance appeared decrease than before annealing. So We have found that 3D printing annealing removes internal stresses and increases the electrical conductivity of printed specimens. These results are very useful for making conductive 3D printing electronic circuit, sensor ect...with electrical conductance suitable for the application.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.249-250
• /
• 2022

PLA 3D printed capsule of FDM method has advantages of mass production and low cost. However, it has a different strength depending on the direction in witch it is laminated. In this paper, structural design of several capsules, FEM analysis, and Compressive strength tests were conducted. As a result, the proposed capsule has a strong load of up to 217.9% compared to general capsule without a reinforcing structure.

• 사물인터넷융복합논문지
• /
• 제6권3호
• /
• pp.75-80
• /
• 2020

최근의 IoT 센서의 소형화와 센서의 소형화로 인하여 다른 센서 및 구조물들과의 간섭 및 견고성을 고려하여 더욱 복잡해 지고 있다. 최근 3D 프린팅 기술은 센서 직접 제작이나, 센서 소자를 포함하는 기구를 만드는 분야에 다양하게 적용이 되고 있다. 그 중에서, fused deposition modeling(FDM) 기술은 장비 및 소재의 가격이 상당히 저렴하며, IoT 기기의 제작이 활용이 가능한 가장 유력한 기술중에 하나이다. 그런 FDM 프린팅 기술은 플라스틱 소재 기반의 필라멘트를 녹여서 적층하여 3D 형상을 만들어 내는 기술이며, 최근에 특허 종료와 아울러 오픈 소스 기반의 저가형 프린터가 개발됨으로 일반인들에게도 널리 사용되고 있다. 이런 FDM 기술을 이용하여 출력된 출력물에 있어서 기계적 물성치는 소재의 종류와 다양한 공정 변수들에 의해서 영향을 받는다. 그 중에서도 내부 채움(infill)은 기계적 물성치에도 큰 영향을 주면, 출력 시간에도 영향을 준다. 따라서 본 논문에서 내부 채움과 기계적 물성치 및 출력 시간 사이의 관계를 규명하여, 기계 기구물을 제작할 때 출력 시간과 기계적 물성치를 고려한 최적의 내부 채움 조건 선정 방법을 제시하고자 한다. 제시된 방법을 증명하고자, 다른 공정은 모두 고정하고, 내부 채움 조건만을 변경한 인장 시편을 제작하고, 제작된 시편을 인장 실험을 통하여 내부 채움에 따른 출력물의 기계적 물성치를 비교 분석하였다.