• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.21-26
• /
• 2020

An autonomous driving system is based on the deep learning system built by big data which are obtained by various IoT sensors. The miniaturization and high performance of the IoT sensors are needed for diverse devices including the autonomous driving system. Specially, the miniaturization of the sensors leads to compel the miniaturization of the fixer structures. In the viewpoint of the miniaturization, metallic structure is a best solution to attach the small IoT sensors to the main body. However, it is hard to manufacture the small metallic structure with a conventional machining process or manufacturing cost greatly increases. As one of solutions for the problems, in this work, metallic FDM (Fused depositon modeling) based on metallic filament was proposed and the FDM process was investigated to fabricate the small metallic structure. Final part was obtained by the post-process that consists of debinding and sintering. In this work, the relationship between infill rate and the density of the part after the post-process was investigated. The investigation of the relationship is based on the fact that the infill rate and the density obtained from the post-processing is not same. It can be said that this work is a fundamental research to obtain the higher density of the printed part.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.353-359
• /
• 2018

In this study, fused deposition modellig(FDM) 3D printing technology has been applied directly to polyester voil fabric to produce 3D printed lace/voil composite fabrics. A stereolithograpy(STL) file with a lace type 3D modelling under the various thickness were prepared and transformed into a g-code file using a g-code generator. The extrusion conditions for FDM 3D printing were controlled by 50mm/s of nozzle speed, $235^{\circ}C$ of nozzle temperature, $40^{\circ}C$ of heating bed temperature. 3D printed lace/voil composite fabriscs manufactured by 3D printing based on FDM using a thermoplactic polyurethane(TPU) filaments were obtained. To evaluate the mechanical properties and washability of the fabricated 3D printed lace/voil composite fabric, KES-FB system test, washing fastness test and dry cleaning resistance test were conducted. As 3D printing thickness increased, KOSHI, NUMERI, and FUKURAMI of 3D printed lace/voil composite fabric increased. From the results of the primary hand value test, 3D printed lace/voil composite fabrics were confirmed to be applicable to women's summer garments. As a result of the washability and dry cleaning resistance test of the 3D printed lace/voil composite fabrics, all samples were graded 4-5.

• The Journal of Korean Physical Therapy
• /
• v.32 no.4
• /
• pp.238-244
• /
• 2020

Purpose: This study compared the effects of the fascial distortion model (FDM), foam rolling (FR), and self-stretching (SS) on the ankle dorsiflexion range of motion (ROM). Methods: Thirty subjects who had no more than 30° of ankle dorsiflexion ROM at the weight-bearing lunge test were recruited in this study. They were divided into three groups: (FDM, FR, and SS), and underwent each intervention for five minutes. Before and after the intervention, the ankle dorsiflexion ROM in the supine (the open-) and standing (the closed-kinetic chain) of the subjects were tested. The changes in the ROM between pre- and post-intervention and among the groups were analyzed. Results: All groups showed increased ankle dorsiflexion ROM after the intervention in both positions. In the position of the open kinetic chain, the changes in the ROM between pre- and post-intervention had significant differences among the groups, and the FDM was higher than the FR and SS. In the position of the closed kinetic chain, the ROM after the interventions and the changes in the ROM had significant differences among the groups, and FDM was higher than the FR (ROM after the intervention, the change in ROM) and SS (the change in ROM). Conclusion: These findings showed that FDM had more efficiency than the FR and SS as FDM had a stronger effect on increasing ankle dorsiflexion in a short, limited time. Clinicians who have limited time to treat their patients, particularly trying to increase ankle dorsiflexion ROM, should consider the application of FDM.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2021

Purpose : The fascia is the body's largest sensory organ affected by mechanical stimuli such as pressure. Fascial distortion model (FDM) is one of the fascia treatment techniques, and it is based that most musculoskeletal problems are caused by three-dimensional distortion of the fascia. Until now, some studies have been conducted to investigate the effect of FDM, but it is still not enough. In this study, among the six techniques of FDM, trigger band (TB) and cylinder distortion (CyD) were applied to the forearm to investigate the immediate effect on the maximal grip strength, force sense and range of motion. Methods : 22 healthy adults in their 20s and 30s participated. Before and after the application of FDM, maximal grip strength, force sense and range of motion were measured. For analysis, a paired t-test was performed, and the significance level was set to p<.05. Results : After FDM, there were a significant differences that increased the force sense and the range of motion (p<.05). But the maximal grip strength did not show a significant difference (p>.05). Conclusion : The results of this study, the FDM did not affect maximal grip strength, but it was shown to increase the sense of force and range of motion. We assumed that it is the result of the changes in the states of the fascia and changes in the activity of mechanical receptors induced by pressure and stretch from FDM application.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.1
• /
• pp.33-39
• /
• 2022

As 3D printer-related patents expire and major technologies are disclosed, the price of 3D printers is dropping, creating an environment where you can easily find the product you want. In particular, the cheapest FDM (Fused Deposition Modeling) 3D printer is being used in various fields. The FDM method can be manufactured without collapsing of the shape only by attaching a support under certain conditions when outputting the shape. When printing a shape without a support, the irregular surface that occurs at a certain angle is a defect in the product, but it is considered that it can be used as another fun factor in terms of arts and crafts. In this paper, to obtain such an irregular surface, factors that can affect the output were controlled and only the output angle was tested as a displacement factor. As a result of the experiment, it was possible to obtain an irregular surface without the filament flowing down when printing at an angle of 62° to 70° from the vertical. Also, artificially irregular surfaces were applied to craft products.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.89-91
• /
• 1986

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.93-101
• /
• 2018

FDM is one of the popular 3D printing technologies because of an inexpensive extrusion machine and multi-material printing. FDM can use thermoplastics such as ABS and PLA. The 3D-printed ABS parts fabricated by FDM are attractive in the automotive industry because of their weight. A 10% reduction in weight can increase the fuel economy by approximately 7%. To use 3D-printed ABS parts as automotive parts, we should evaluate the 3D-printed parts in terms of automotive reliability. In this study, 3D-printed ABS samples were evaluated using Ono's rotary bending fatigue test. We obtained an S-N curve for the 3D-printed ABS specimen from the finite-element analysis. The S-N curve can be useful in early-stage design decisions for 3D-printed ABS parts.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.235-242
• /
• 2016

The purpose of this study is an attempt to improve the functionality of a conventional Fused Deposition Modeling (FDM) process using the Automatic Tool Changer (ATC) to perform multimaterial production and post-processing. Hybrid-FDM means a fusion of an Additive Manufacturing process and grinding process using the ATC system. In order to enhance the potentiality of production capacity for multi-material fabrication and surface roughness improvement, two extrusion tools and one grinding tool system are suggested. A pneumatic chuck is attached on a moving platform in the XY axes plane and an extrusion head and grinding head are placed in a docking station, allowing for a quick changeover with each other. Therefore, the manufacturing lead time can be reduced efficiently for the fabrication of a product.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.839-844
• /
• 2017

In the past few years, three-dimensional (3D) printing has been developed as a rapid prototyping (RP) technique. The fused deposition modeling (FDM)-type 3D printing is one of the most useful RP methods; however, it still has several disadvantages, such as low conductivity, heat degradation, and low surface quality. In this study, test specimens are fabricated using an FDM-type 3D printer with an ABS material. Then, the specimens undergo post-processing on submerging in acetone with various processing times. As the processing time increases, surface roughness is enhanced significantly within the first five seconds by chemical processing, following which the processing effects are reduced. Furthermore, post processing causes the ultimate strength and strain to increase slightly with increased processing time.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1069-1075
• /
• 2020

This research is aimed at examining the effect of the implementation of ABAS and BR on GFP with FDM as mediation. Respondent of research is 100 civil servants at the Directorate General of Population and Civil Registration of the Ministry of Home Affairs for the Republic of Indonesia. Data analysis is done with WarpPLS. Result of research shows that the implementation of ABAS has direct and indirect effects on GFP, and the indirect effect involves the mediation of FDM. Other result indicate that the making of proper financial decisions will help improving GFP. The effectiveness of financial decisions are able to mediate the implementation of ABAS in improve GFP. Meanwhile, BR does not affect GFP, either directly or indirectly through FDM. BR seems oriented more toward improving public service and people's welfare. This research suggests that the next research should examine whether the implementation of BR can improve governmental organizational performance in delivering public service. This research has proven that the implementation of ABAS has helped in improving the quality of FDM, while the other benefit is that this system improves GFP. Moreover, this research also gives confirmation that accounting information in good quality will be very useful in FDM.