• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.45-55
• /
• 2010

While Long Term Evolution-Frequency Division Duplexing (LTE-FDD) is regarded as one of the strong candidates for "4G" wireless broadband access in FDD field, LTE-Time Division Duplexing (TDD) is emerging as one possible migration path for WiMAX-TDD in some cases as well as the migration path for Time Division-Synchronous Code Division Multiple Access (TD-SCDMA). In this paper, we analyze the feasibility of dual mode with LTE-TDD in two combinations: dual mode LTE-FDD/TDD and dual mode Worldwide Interoperability for Microwave Access (WiMAX)-TDD/LTE-TDD. Thanks to the commonality in numerology, terminology, and frame structure between LTE-FDD and LTE-TDD, dual mode LTE-FDD/TDD looks feasible in a cost-effective manner. Thanks to the commonality in scheduling algorithm, control mechanism, and supported spectrum bands, it is shown that dual mode WiMAX-TDD/LTE-TDD looks feasible as well. It should be also noted that the commonality in numerology and frame structure is critical for building a chip while the commonality in algorithms and control mechanisms is critical to make it work.

• Journal of the KSME
• /
• v.25 no.5
• /
• pp.394-399
• /
• 1985

금성통신에서 특정연구 사업으로 추진해 온 독자모델인 GSF-480를 중심으로 일반적인 FD D의 특성과 메카니즘(mechanism)에 대하여 기술하고자 한다. 현재 FDD의 주류를 이루고 있는 것이 5v1/4인치 양면 FDD이지만 소형화 대용량화에 의하여 점차 새로운 제품 즉 3.5인치, 3인치 FDD, 5v1/4인치 1M, 1.6M 버전(version)등이 개발되었다. 뿐만 아니라 트랙밀도를 높이는 외 에도 선밀도를 증가시키는 수직기록 방식도 개발될 전망이다. 그러나 대용량화가 되기 위하여 서는 FDD 상호간의 호환의 문제를 어떻게 하든 줄여야 할 것이다. 이를 위해서는 전술한 바와 같이 악세스 메카니즘의 정밀도 및 클램프시의 오차등 오프트랙 요인이 되는 것을 잘 고려하여야 한다. 국내에서는 기술도입 또는 자체개발로 FDD를 생산하고 있으며 금성통신은 83년 정부의 특정 연구사업으로 FDD를 개발 생산하고 있다. 앞으로 소형컴퓨터의 시장이 확대되고 수출이 늘어나게 되면 FDD의 시장도 확대될 것으로 전망되며 따라서 제품개발도 더욱 활발해질 것으로 기대된다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.8
• /
• pp.14-25
• /
• 2002

In this paper, we propose a modified AFC algorithm which is suitable for the implementation of WCDMA reverse link receiver modem. To reduce the complexity, the modified CP-FDD algorithm named 'Normalized CP-FDD' is applied to the AFC loop. The proposed FDD algorithm overcomes the conventional CP-FDD's sensitivity to the variance of input signal amplitude and increases the linear range of S -curve. Therefore, offset frequency estimation using the proposed scheme can be more stable than the conventional method. Unlike IS-95, since pilot symbol in WCDMA is not transmitted continuously, we introduce a moving average filter at the FDD input to increase the number of cross-product. So, tracking speed and stability are improved. For more rapid frequency acquisition and tracking, we adopt a multi-stage tracking mode. Using NCO having ROM table structure, the frequency offset is compensated. We applied the proposed algorithm in the implementation of WCDMA base station modem successfully.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.572-575
• /
• 2003

There is two System for IMT-2000 Service. one is FDD(Frequency Division Duplex), the other is TDD(Time Division Duplex) system. At the 1920MHz, they have common boundary in IMT-2000 frequency allocation of Korea. In this paper, The amount of Interference From TDD MS(Mobile Station) and BS(Base Station) to FDD BS is Analyzed for Investigation on capacity variation of FDD service by frequency separation. the result and methodology in this paper will be used basically for calculating the guard-band between FDD and TDD service in the future

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.13-27
• /
• 2014

Agile methodologies have gained recognition as efficient development processes through their quick delivery of software, even under time constraints. However, like other agile methods such as Scrum, Extreme Programming (XP) and The Dynamic Systems Development Method (DSDM), Feature Driven Development (FDD) has been criticized due to the unavailability of security elements in its twelve practices. In order to examine this matter more closely, we conducted a systematic literature review (SLR) and studied literature for the years 2001-2012. Our findings highlight that, in its current form, the FDD model partially supports the development of secure software. However, there is little research on this topic, as detailed information about the usage of secure software is rarely published. Thus, we have been able to conclude that the existing five phases of FDD have not been enough to develop secure software until recently. For this reason, security-based phase and practices in FDD need to be proposed.

• Smart Structures and Systems
• /
• v.5 no.2
• /
• pp.153-171
• /
• 2009

In this paper, the analytical fault detection and diagnosis (FDD) is presented using model-based and signal-based methodology with wavelet analysis on signals obtained from sensors and sensor networks. In the model-based FDD, we present the modeling of contact interface found in soft materials, including the biomedical contacts. Fingerprint analysis and signal-based FDD are also presented with an experimental framework consisting of a mechanical pneumatic system typically found in manufacturing automation. This diagnosis system focuses on the signal-based approach which employs multi-resolution wavelet decomposition of various sensor signals such as pressure, flow rate, etc., to determine leak configuration. Pattern recognition technique and analytical vectorized maps are developed to diagnose an unknown leakage based on the established FDD information using the affine mapping. Experimental studies and analysis are presented to illustrate the FDD methodology. Both model-based and wavelet-based FDD applied in contact interface and manufacturing automation have implication towards better quality of life by applying theory and practice to understand how effective diagnosis can be made using intelligent FDD. As an illustration, a model-based contact surface technology an benefit the diabetes with the detection of abnormal contact patterns that may result in ulceration if not detected and treated in time, thus, improving the quality of life of the patients. Ultimately, effective diagnosis using FDD with wavelet analysis, whether it is employed in biomedical applications or manufacturing automation, can have impacts on improving our quality of life.

• Electronics and Telecommunications Trends
• /
• v.30 no.3
• /
• pp.123-130
• /
• 2015

본고는 TDD(Time Division Duplex)/FDD(Frequency-Division Duplex) 네트워크 컨버전스를 통해 LTE(Long Term Evolution) 서비스를 제공하고 있는 주요 사업자들의 동향에 대하여 분석 정리하였다. 본고의 분석 결과에 따르면, 상당수 사업자가 보유 주파수 여건을 고려하여 경쟁력을 높이기 위한 목적으로 네트워크 컨버전스를 추진한 것으로 나타났다. 향후 국내에서도 TDD/FDD 컨버전스를 촉진하고 주파수 이용 효율성을 개선하기 위한 정책방안에 대한 모색이 필요하다고 사료된다.

• Journal of Korea Multimedia Society
• /
• v.16 no.7
• /
• pp.862-869
• /
• 2013

In order to support a cell-independent traffic asymmetry, the conventional TDD system cannot avoid crossed time slot (CTS) interference. Moreover, the TDD/FDD hierarchical overlay cellular systems is taken into account as a generally accepted cell model in a heterogeneous radio environment. In this paper, we propose an interference resolving radio resource allocation technique in a TDD-OFDMA cellular system that overlays a FDD-CDMA cell. In our proposed scheme, we exploit under-used FDD-CDMA uplink resource by TDD mobile abiding by a region based time slot(TS) allocation which in turn mitigates CTS interference considerably. It is demonstrated that combined with under-used resource utilization scheme based on mobile's location, the proposed technique can reduce CTS interference considerably and support the asymmetric traffic in TDD system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1545-1550
• /
• 2014

Fault detection and diagnosis (FDD) of photovoltaic (PV) power systems is one of significant techniques for reducing economic loss due to abnormality occurred in PV modules. This paper presents a new FDD method against PV power systems by using statistical comparison. This comparative approach includes deviation signals between the outputs of two neighboring PV modules. We first define a binary hypothesis testing under such deviation and make use of a generalized likelihood ratio testing (GLRT) theory to derive its FDD algorithm. Additionally, a recursive computational mechanism for our proposed FDD algorithm is presented for improving a computational effectiveness in practice. We carry out a real-time experiment to test reliability of the proposed FDD algorithm by utilizing a lab based PV test-bed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.983-990
• /
• 2008

This paper presents the fault detection and diagnosis(FDD) algorithm to enhance reliability of a longitudinal controller for an autonomous All-Terrain Vehicle(ATV). The FDD is designed to monitor and identify faults which may occur in distributed hardware used for longitudinal control, e.g., DSPs, CAN, sensors, and actuators. The proposed FDD is an integrated approach of decentralized and centralized FDD. While the former is processed in a DSP and suitable to detect faults in a single hardware, it is sensitive to noise and disturbance. On the other hand, the latter is performed via communication and it detects and diagnoses faults through analyzing concurrent performances of multiple hardware modules, but it is limited to isolate faults specifically in terms of components in the single hardware. To compensate for disadvantages of each FDD approach, two layered structure including both decentralized and centralized FDD is proposed and it allows us to make more robust fault detection and more specific fault isolation. The effectiveness of the proposed method will be validated experimentally.