• 한국진공학회지
• /
• 제17권6호
• /
• pp.487-494
• /
• 2008

준 2차원 수치적 모델을 사용하여 침-평판(point-plane)형의 전극 사이에 있는 중간 압력 질소의 방전에 대한 시뮬레이션을 수행하였다. 이 모델에서는 전자와 이온에 대한 연속방정식을 풀어 시. 공간적으로 변하는 전하분포를 계산하고, 공간 전하 분포의 변화에 따라 결정되는 전기장은 푸아송 방정식을 풀어 얻는다. 연속 방정식은 FCT (Flux-corrected transport) 알고리즘과 FEM (Finite Element Method) 방법을 적용하여 수치적으로 다루어 졌다. 50Torr 압력에서의 질소 방전에 대한 시뮬레이션 결과는 중간 압력 질소 방전의 물리적 특성에 관한 상세한 이해를 제공한다. 또 계산 결과와 실험 결과[1]와의 비교는 정성적으로 잘 일치하는 것을 보여 준다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.133-136
• /
• 1986

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.234-243
• /
• 1995

An arry circuit is designed for parallel computation of vector-radix 2-D discrete cosine transform (VR-FCT) which is a fast algorithm of DCT. By using a 2-D array of processing elements (PEs), the butterfly structure of the VR-FCT can be efficiently implemented with high condurrency and local communication geometry. The proposed implementation features architectural medularity, regularity and locality, so that it is very suitable for VLSI realization. Also, no transposition memory is required. The array core for (8$\times$8) 2-D DCT, which is designed usign ISRC 1.5.mu.m N-Well CMOS technology, consists of 64 PEs arranged in (8$\times$8) 2-D array and contains about 98,000 transistors on an area of 138mm$^{2}$. From simulation results, it is estimated that (8$\times$8) 2-D DCT can be computed in about 0.88 .mu.sec at 50 MHz clock frequency, resulting in the throughput rate of about 72${\times}10^[6}$ pixels per second.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.471-477
• /
• 2007

SCBF(Spherically Convergent Beam Fusion) device has been studied as a neutron source. Neutron production rate is a most important factor for the application of SCBF device and is proportional to the square of the ion current[1]. It is regarded generally that some correlations between the potential well structure and the ion current exist. In this paper, the ion current and potential distribution were calculated in a variety of grid cathode geometries using FEM-FCT method. Single potential well structure was certified inside the grid cathode. The deeper the potential well became, the higher the ion current due to the high electric field near the grid cathode became.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.693-701
• /
• 1998

This study presents result of comparison between two other numerical method method of char-acteristics(MOC) and Lax-Wendroff method(LWM) applied at wave action analysis of intake and exhaust pipe in terms of calculated pressure velocity and emitted noise in the time and the fre-quency domain by means of fast Fourier transform analysis. Particularly FCT(Flux Corrected Transport)scheme is appended to LWM to protest unaceptable overshoots occurring near discon-tinuity. The final conclusion of this study is that MOC should be replaced by a second order finite difference approach because of larger contributions due to high frequency components than the results from the method of characteristics. Clear benefits we can get by change are faster calcula-tion higher accuracy conservation of mass and consistent calculation method.

• Journal of Magnetics
• /
• 제10권1호
• /
• pp.28-32
• /
• 2005

The magnetic properties and ordering behavior of Nb-doped FePt alloy films prepared by dc-magnetron sputtering were investigated. It was found that Nb addition retarded the ordering reaction from the disordered face-centered-cubic (fcc) Al phase to the ordered face-centered-tetragonal (fct) L1₀ phase. The tetragonality (c/a ratio) of the ordered fct L1₀ phase increased with the Nb concentration. Nb addition hampered c-axis contraction during ordering, probably because the larger Nb atoms occupy Pt sites. Consequently, the coercivity and magnetocrystalline anisotropic energy of Nb-doped FePt alloy films are lower than those of un-doped FePt film under equivalent annealing conditions.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.211-211
• /
• 2003

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.99-105
• /
• 2018

Soils are generally classified as fine-grained or coarse-grained depending on the percentage content of the primary constituents. In reality, soils are actually made up of mixed and composite constituents. Soils primarily classified as fine-grained, still consists of a range of coarse particles as secondary constituents in between 0% to 50%. A laboratory scale model test was conducted to investigate the influence of coarse particles on the physical (e.g., density, water content, and void ratio) and mechanical (e.g., quick undrained shear strength) properties of primarily classified fine-grained cohesive soils. Pure kaolinite clay and sand-mixed kaolinite soil (e.g., sand content: 10%, 20%, and 30%) having various water contents (60%, 65%, and 70%) were preconsolidated at different stress levels (0, 13, 17.5, 22 kPa). The quick undrained shear strength properties were determined using the conventional Static Cone Penetration Test (SCPT) method and the new Fall Cone Test (FCT) method. The corresponding void ratios and densities with respect to the quick undrained shear strength were also observed. Correlations of the physical properties and quick undrained shear strengths derived from the SCPT and FCT were also established. Comparison of results showed a significant relationship between the two methods. From the results of FCT and SCPT, there is a decreasing trend of quick undrained shear strength, strength increase ratio ($S_u/P_o$), and void ratio (e) as the sand content is increased. The quick undrained shear strength generally decreases with increased water content. For the same water content, increasing the sand content resulted to a decrease in quick undrained shear strength due to reduced adhesion, and also, resulted to an increase in density. Similarly, it is observed that the change in density is distinctively noticeable at sand content greater than 20%. However, for sand content lower than 10%, there is minimal change in density with respect to water content. In general, the results showed a decrease in quick undrained shear strength for soils with higher amounts of sand content. Therefore, as the soil adhesion is reduced, the cone penetration resistances of the FCT and SCPT reflects internal friction and density of sand in the total shear strength.

• 한국해안·해양공학회논문집
• /
• 제32권1호
• /
• pp.1-10
• /
• 2020

자유수면을 포함하는 파동장과 같이 단상의 경계가 시간발전에 따라 지속적으로 변화하는 경우나 액상과 기상이 혼합되는 문제에 있어서는 다상유동(multiphase flow) 문제를 적용하는 예가 증가하고 있다. 특히, 파동장과 같은 자유수면의 문제를 취급하는데 있어서는 혼합되지 않는 액상과 기상의 비압축성 뉴턴유체를 고려한 혼상류 모델이 적용되는 경우가 많다. 일반적으로 혼상류 모델은 각상의 경계면에 대한 시간기반 거동추적이 필수적이며, 궁극적으로는 계산의 정도를 좌우한다. 본 연구는 다양한 CFD 수치해석코드에 적용되고 있는 대표적인 VOF-type의 경계면 추적기법들의 이류성능을 평가하였다. 특히, 기존의 전통적인 VOF-type의 경계면 추적기법 및 이류계산에서 발생하는 수치확산을 최소화하기 위해 수치유속(numerical flux)을 제어하는 FCT 법의 효용성을 평가하고, 더불어 CIP 법을 활용한 자유수면 추적성능의 가능성을 고찰하였다. 그 결과, 본 연구에서 적용한 제한된 조건하에서는 수치확산 방지를 위해 수치확산방지 유속을 도입한 FCT-VOF 법이 가장 높은 경계면의 추적성능을 보였다. 본 연구에서 도출되는 결과는 다양한 수치해석코드에 적용되는 자유수면의 추적기법을 선택함에 있어서 중요한 기초자료로 활용될 것으로 기대된다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.272-278
• /
• 2007