• 정보보호학회논문지
• /
• 제28권6호
• /
• pp.1523-1537
• /
• 2018

AI 스피커는 간단한 동작으로 음악재생, 온라인 검색 등 사용자에게 유용한 기능을 제공하고 있으며, 이에 따라 AI 스피커 시장은 현재 매우 빠른 속도로 성장하고 있다. 그러나 AI 스피커는 항시 사용자의 음성을 대기하고 있어 보안 위협에 노출될 경우 도청, 개인정보 노출 등 심각한 문제가 발생할 수 있다. 이에 모든 AI 스피커의 전반적으로 향상된 보안을 제공하기 위해 발생 가능한 보안 위협을 식별하고 체계적인 취약점 점검을 위한 방안이 필요하다. 본 논문에서는 점유율이 높은 제품 4개를 선정하여 보안위협모델링을 수행하였다. Data Flow Diagram, STRIDE, LINDDUN 위협모델링을 통해 체계적이고 객관적인 취약점 점검을 위한 체크리스트를 도출하였으며, 이후 체크리스트를 이용하여 실제 기기에 대한 취약점 점검을 진행하였다. 마지막으로 취약점 점검 결과 및 각 제품에 대한 취약점 비교 분석을 통해 AI 스피커의 보안성을 향상시킬 수 있는 방안을 제안하였다.

• 해양환경안전학회지
• /
• 제23권7호
• /
• pp.775-782
• /
• 2017

현 경비 함정의 위치는 해양사고 위치와의 접근성이 떨어져 있어 합리적이고 과학적인 기준이 아닌 주관적인 판단으로 배치되어 있다. 이에 본 연구에서는 과거 해양사고 데이터를 기반으로 정량적으로 최적의 경비 함정 배치 위치를 도출하고자 한다. 연구 해역은 포항 연안을 대상으로 하였다. 본 연구에서는 k-평균 군집화 알고리즘으로 경비 함정의 배치 위치를 도출한 후, 보로노이 다이어그램으로 각 경비 함정 간 경비 구역을 구획하였다. 연구 결과, 해양사고 1건당 경비 함정의 평균 항해 거리는 4.4해리, 평균 도착 시간은 13.2분이 개선될 수 있었다. 경비 함정을 유동적으로 배치 수를 달리해야 할 경우 본 연구에서 적용한 기법을 활용하여 최적 배치가 가능하며, 신속한 구조 지원 체계가 더욱 확보될 것으로 판단된다.

• 한국안광학회지
• /
• 제7권1호
• /
• pp.51-55
• /
• 2002

본 연구는 정상 시력을 가진 피검자의 안구가 동향운동을 하도록 주시점의 위치를 변경하며, 동향운동이 대뇌 시 피질 cerebral visual cortex의 뇌파에 미치는 영향을 분석하였다. 시 유발전위 장치(visual evoked potential system)는 Bio-Pag(production in USA)을 이용하였으며, 검사결과는 컴퓨터에 입력하여 분석하였다. 검사실의 조도는 50lux이며, 사용한 시표의 직경은 3 cm의 붉은 광점이며, 우전 dextroversion과 좌전 levoversion에 따른 결과는 다음과 같다. 1. 시자극에 관계하는 시 피질의 뇌파 출현의 높은 빈도는 delta wave, beta wave, theta wave 그리고 alpha wave의 순으로 나타났다. 2. 우전과 좌전에 대한 뇌파의 종류와 진폭은 거의 비슷하다. 3. 진폭에 대한 히스토그램은 우전과 좌전 모두 가우시안 Gausian 분포로 나타났다. 4. 뇌파의 진폭에 대한 위상 분석의 결과는 거의 비슷하다. 5. 뇌파 진폭과 주파수에 대한 fast fourier transform 분석에서 대개 20 Hz 이하의 저주파 low frequency로 나타났으며, 우전과 좌전의 결과는 비슷하다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.618-620
• /
• 2017

Currently, IoT mobile applications are growing fast in number and complexity. As a result, the applications quality issue became crucial, hence to ensure their quality a proper testing is highly required. Testing such mobile applications is always tedious, time-consuming and expensive. To cope with these issues, we propose a testing approach using activity diagram with data flow information. The main functionality of IoT applications is exposing the meaningful data obtained from the sensors to the users by doing a lot of analysis, comparison, and computation. Therefore, our focus is on identifying and selecting the most appropriate paths at which calculation is taking place and the paths at which predicate exists. In our case study, we have used a real-world IoT mobile application and identified a total of ten test paths with two predicate uses and two computation uses through an example. With applying only this four critical paths, we can adequately test the application's core functionalities while significantly reduce the testing effort and cost.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.20-26
• /
• 2009

In this paper, the switching mode conversion type pulse charger by fly-back converter method for lead battery of the solar cell generator equipment is proposed. And we propose the control circuit and design method of insulated switching mode convert type pulse charger by fly-back convert method in the lead battery. The proposed system can minimize the current consumption by digital pulse. Also the proposed system can generate the constant 10[KHz] frequency, transmit the signal with main control system in the power control system. And it supervises the state of lead battery using one chip micro processor. The proposed the switching mode conversion type pulse charger by the fly-back converter method can charge fast and stabilize lead battery with nominal value 12[V], 20[AH]. Also we propose the design procedure of the power control circuit for turn ratio of fly-back inductor and determining method of values such as the charging current, bulk current, partial current, over current value and fixed charging voltage. The experiment results for the voltage and current wave for partial, bulk, over and fixed charging period show the good charging effect and performance. And the PCB and internal coupling diagram of the switching mode conversion type pulse charger by fly-back converter method is presented.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.7-12
• /
• 2004

Due to the very fast switching speed of Josephson junctions, superconductive digital circuit has been a very good candidate fur future electronic devices. High-speed and Low-power microprocessor can be developed with Josephson junctions. As a part of an effort to develop superconductive microprocessor, we have designed an RSFQ 4-bit ALU (Arithmetic Logic Unit) in a pipelined structure. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in this work consisted of three DC current driven SFQ switches and a half-adder. We successfully tested the half adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached switches at the input ports to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this setup, 1-bit block of ALU was successfully tested up to 40 GHz. An RSFQ 4-bit ALU was fabricated and tested. The circuit worked at 5 GHz. The circuit size of the 4-bit ALU was 3 mm ${\times}$ 1.5 mm, fitting in a 5 mm ${\times}$ 5 mm chip.

• 융합신호처리학회논문지
• /
• 제8권1호
• /
• pp.73-77
• /
• 2007

본 논문에서는 적응 필터링 분야에서 널리 쓰이고 있는 재귀형 LMS 필터의 고속연산을 위해 Cyclo-static 스케줄러를 이용하여 VLSI구현에 적합한 구조를 제안한다. 이과정은 크게 스케줄 생성 단계와 회로도 생성 단계로 구성되는데, 스케줄 생성단계는 입력으로서 Fully Specified Flow Graph(FSFG)로 표현된 재귀 DSP 알고리듬을 취하여 입력의 샘플링속도, 프로세서의 수, 그리고 주어진 입력에 대한 출력의 지연에 있어 최적인 Cyclo-static 스케줄러를 생성하여 각 프로세서간의 연결선이 최소가 되도록 스케줄을 변환한다. 회로도 생성 단계에서는 이 변환된 스케줄러로부터 미리 정의된 두 가지 형태의 프로세서 구조를 이용하여 그것을 구성하고 있는 레지스터 및 멀티플렉서의 할당을 행하고 제어신호를 포함한 완전한 회로도를 생성한다, 이렇게 생성된 회로도는 기존의 실리콘 컴파일러를 이용하여 VLSI 레이아웃으로 용이하게 변환 될 수 있다.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.183-190
• /
• 2008

Pyroprocessing is the optimal means of treating spent metal fuels from metal fast fuel reactors and is proposed as a potential option for GNEP in order to meet the requirements of the next generation fuel cycle. Currently, efforts for research and development are being made not only in the U.S., but also in Asian countries. Electrorefining, cathode processing by distillation, injection casting for fuel fabrication, and waste treatment must be verified by the use of genuine materials, and the engineering scale model of each device must be developed for commercial deployment. Pyroprocessing can be effectively extended to treat oxide fuels by applying an electrochemical reduction, for which various kinds of oxides are examined. A typical morphology change was observed following the electrochemical reduction, while the product composition was estimated through the process flow diagram. The products include much stronger radiation emitter than pure typical LWR Pu or weapon-grade Pu. Nevertheless, institutional measures are unavoidable to ensure proliferation-proof plant operations. The safeguard concept of a pyroprocessing plant was compared with that of a PUREX plant. The pyroprocessing is better adapted for a collocation system positioned with some reactors and a single processing facility rather than for a centralized reprocessing unit with a large scale throughput.

• 조명전기설비학회논문지
• /
• 제29권5호
• /
• pp.1-12
• /
• 2015

In this study, we derive an evaluation structure and 18 Valuation vocabulary for the media facade lighting conditions. In addition, this study deduced the applicable elements that could be applied in time of building nightscape lighting design using media facade by conducting affective evaluation. The research results are as follows: It was found that the image axis of "Dynamic, Colorful" showed the lighting change speed was fast with diverse application of lighting color, and its evaluation object applied by general emphasis, vertical emphasis, partial emphasis lighting method was highly assessed. In addition, it was found that "Luxurious, Unusual" axis showed lighting change speed was slow with the application of lighting color in warm hue series, and its evaluation object applied by line lighting, dot lighting, general emphasis lighting methods was highly assessed. Lastly, it was found that "Soft, Secure" image axis showed the lighting change speed was slow with the application of pastel tone lighting color, and the evaluation object applied by general emphasis lighting method was highly assessed.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.727-743
• /
• 2019

This paper presents a pulse-width modulation strategy to eliminate the common mode voltage (CMV) with reduced CMV spikes in multilevel inverters since a high CMV magnitude and its fast variations dv/dt result in bearing failure of motors, overvoltage at motor terminals, and electromagnetic interference (EMI). The proposed method only utilizes the zero CMV states in a space vector diagram and it is implemented by a carrier-based pulse-width modulation (CBPWM) method. This method is generalized for odd number levels of inverters including neutral-point-clamped (NPC) and cascaded H-bridge inverters. Then it is extended to the over-modulation mode. The over-modulation mode is implemented by using the two-limit trajectory principle to maintain linear control and to avoid look-up tables. Even though the CMV is eliminated, CMV spikes that can cause EMI and bearing current problems still exist due to the deadtime effect. As a result, the deadtime effect is analyzed. By taking the deadtime effect into consideration, the proposed method is capable of reducing CMV spikes. Simulation and experimental results verify the effectiveness of the proposed strategy.