• 제목/요약/키워드: FAC

검색결과 326건 처리시간 0.025초

위탁급식업체 국제화를 위한 추진, 유인 및 상호작용 요인의 영향 분석 (The Effect of Push, Pull, and Push-Pull Interactive Factors for Internationalization of Contract Foodservice Management Company)

  • 이현아;한경수
    • Journal of Nutrition and Health
    • /
    • 제42권4호
    • /
    • pp.386-396
    • /
    • 2009
  • 위탁급식업체 국제화를 위한 추진, 유인, 추진-유인요인 상호작용 요인과 국제화를 저해 및 가능하게 하는 내부원동력 요인과의 인과관계와 내부원동력 요인과 국제화 단계의 인과관계에 대해 연구한 결과의 요약은 다음과 같다. 첫째, 조사대상자의 일반적인 특성에서 조사대상자의 근무하는 기업의 형태는 대기업 58명 (54.2%), 중소기업 49명 (45.8%)로 비슷한 비율로 나타났고, 조사 업체 수는 중소기업 12곳, 대기업 8곳으로 나타났다. 직급은 대부분 대리 (59.8%)였고, 조사대상자가 속해 있는 업체의 국제화 단계는 대부분 국내지향적인 1단계로 나타났다 (79.4%). 둘째, 신뢰도 분석결과 Chronbach's {\alpha}$ 계수는 .729${\sim}$.964로 나타나 신뢰도는 비교적 높은 것으로 나타났다. 타당성을 검증하기 위해 탐색적 요인분석 (Exploratory Factor Analysis) 실시 결과 해당 요인의 적재치는 .549에서 .982의 범위를 가지는 등 대체로 높게 나타났다. 추진요인의 2개의 하위요인은 '국내시장포화 및 경영자의 의지'와 '국제화를 위한 투자'로 요인명을 부여하였고, 유인요인의 2개 하위요인은 '기업 외부적 국제화 환경'과 '글로벌네트워크와 문화전파'로 요인명을 부여하였다. 추진-유인 상호작용 요인의 3개의 하위요인은 '국외시장정보', '해외진출 절차와 예산'과 '국내네트워크와 시장규모'로 요인명을 부여하였고, 내부원동력 요인은 2개의 요인으로 나뉘었고, 국제화 저해요인과 국제화 가능요인으로 명명하였다. 셋째, 가설검증 결과 추진요인 (국내시장포화 및 경영자의 의지, 국제화를 위한 투자)은 국제화 저해 요인과 국제화 가능 요인에 모두 정 (+)의 영향을 미치지 못하는 것으로 나타났다. 유인요인인 기업 외부적 국제화 환경 요인과 국제화 저해요인 간에 정 (+)의 영향관계가 있는 것으로 나타났고, 국제화 가능요인에는 정 (+)의 영향을 미치지 못하는 것으로 나타났다. 또한 글로벌네트워크와 문화전파는 국제화 저해요인에 정 (+)의 영향을 미치지 못하는 것으로 나타났고, 국제화 가능요인에 대해서는 정 (+)의 영향을 미치는 것으로 나타났다. 유인요인의 외부적인 국제화 환경은 국제화를 저해하지만, 글로벌 네트워크와 문화가 전파되어 있을수록 국제화를 가능하게 하는 것으로 사료된다. 추진-유인 상호작용 요인과 국제화 저해 요인과 국제화 가능 요인과의 영향관계를 살펴보면, 상호작용 요인의 국외 시장정보는 국제화 저해요인과 가능요인에 모두 정 (+)의 영향을 미치는 것으로 나타났다. 이것은 국외 시장에 대한 정보가 국제화를 저해할 수도 있다는 것이다. 해외진출 절차와 예산은 국제화 저해요인과 가능요인에 모두 정 (+)의 영향을 미치지 않는 것으로 나타났고, 국내네트워크와 시장 규모는 국제화 저해요인에 정 (+)의 영향을 미치지 못하는 것으로 나타났고, 국제화 가능요인에 정 (+)의 영향을 미치는 것으로 나타났다. 국제화 저해 요인과 가능 요인은 국제화 단계에 정 (+)의 영향 관계가 있는 것으로 나타났고, 국제화를 저해 요인이 가능 요인 보다 국제화 단계에 더 영향을 미치는 것으로 나타났다 (${\beta}$ = .492 > .177) 이상에서 살펴본 결과, 위탁급식업체 국제화는 기업 내부적인 추진요인보다는 기업 외부적, 환경적 요인과 추진, 유인 단독요인 뿐만 아니라 추진요인과 유인요인의 상호작용 요인과 영향 관계에 있다는 것이다. 이것은 위탁급식업체가 국제화 하고자 할 때 이론적으로 고려해야할 사항으로 사료된다. 또한, 위탁급식업체 국제화를 저해 및 가능하게 하는 내부원동력 요인은 국제화 단계와 관련성이 있는 것으로 나타났다. 지금도 꾸준히 위탁급식업체의 국제화가 진행되고 있는데, 해외업무 담당자들은 위탁급식업체 국제화에 미치는 요인과 요인들 간의 관계성 분석을 통하여 합리적인 국제화 모델을 찾아야 할 것으로 사료된다. 본 연구의 제한점은 조사 방법에 있어 회수율이 낮은 우편 설문을 실시하여, 낮은 설문회수율을 나타내고 있어 연구 결과에 대한 일반화에 대해 한계를 가지고 있으며, 요인의 하위 변수 선정에 있어서 다양한 변수를 사용하지 못한 점이다. 또한, 위탁급식업체를 대상으로 국제화에 대한 연구가 전무하여, 관련 대상의 결과를 비교 고찰할 연구의 결과가 부족하였다. 본 연구는 초기단계의 탐색적 연구로 변수도출을 위한 위탁급식업체 실무자를 대상으로 개별심층면접을 실시하는 선행 단계를 통해 본 연구를 진행하게 되었는데, 면접자의 수가 많지 않아 이에 따른 변수도출의 신뢰성과 타당성에도 한계가 있었다. 따라서 향후 연구에서는 심층면접 대상자를 늘려서 연구의 신뢰성과 타당성을 증대시키고, 다양한 변수 도출을 위한 선행연구가 더욱 필요할 것으로 사료된다. 설문 조사대상을 지역별, 규모별로 업체를 구분하여 규모를 늘리고, 일대일면접 설문방법을 사용하여 회수율을 높일 수 있는 방안을 강구하여 연구 결과의 일반화에 대한 오류를 줄여야 할 것이다. 또한, 금융 위기의 국제 정황 가운데, 국제화를 위한 꾸준한 연구를 통하여, 선진 다국적 기업화 방안에 대한 연구들이 지속적으로 이루어져야 할 것이다.

생합성 경로의 이해를 통한 Avermectin $B_{1a}$ 고생산성 변이주 개발 (Development of Avermectin $B_{1a}$ High-yielding Mutants through Rational Screening Srategy based on Understanding of Biosynthetic Pathway)

  • 송성기;정용섭;전계택
    • KSBB Journal
    • /
    • 제20권5호
    • /
    • pp.376-382
    • /
    • 2005
  • AVM $B_{1a}$는 Streptomyces avermitilis가 생합성하는 이차대사산물로, 강력한 구충효과를 갖는 polyketide 계열의 물질이다. AVM $B_{1a}$ 생합성의 전구체로 isoleucine이 사용되고 AVM의 생합성 경로가 지방산 합성과 유사하므로, 전구체를 과량생합성하고 polyketide 생합성 경로로 진행되는 탄소원의 흐름이 증가된 변이주를 선별하기 위하여 isoleucine의 아미노산 유사체 (O-methyl threonine)와 지방산 합성 저해물질 (p-fluoro phenoxy acetic acid)에 대한 저항성 변이주를 선별하고자 하였다. 모균주의 AVM $B_{1a}$ 생산성은 약 100 units/L로 매우 낮은 반면, 100 ppm의 pFAC에 대한 저항성 변이주인 PFA-1는 약 4,200 units/1의 AVM $B_{1a}$를 생산하는 것으로 관찰되었다. 이 균주를 모균주로 하여 OMT에 대한 저항성을 지속적으로 증가시킬 경우 AVM $B_{1a}$ 생산성이 2배 더 증가한 약 9,000 units/1의 생합성 능력을 보이는 고생산성 변이주를 개발할 수 있었다. 또한 주목할 만하게도 지방산 저해물질인 PFAC에 대한 변이주의 저항성을 지속적으로 증가시킴으로써 AVM $B_{1a}$ 생산성이 11,000 units/L에 이르는 고역가 변이주를 선별할 수 있었다. 한편 상기의 OMT와 pFAC를 이용한 rational screening 전략을 통해 지속적으로 선별한 변이주들에 대한 AVM $B_{1a}$의 생산성 분포를 histogram을 통해 분석해 본 결과, 초반부에 선별된 돌연변이주들은 AVM $B_{1a}$의 생합성 능력에 있어서 거의 모두가 ($95\%$ 이상) 4,000 units/1 이하의 비교적 낮은 범위에 분포하는 반면, OMT와 pFAC의 농도를 높여가며 유도된 저항성 돌연변이주들의 경우에는 이들 중에 고생산성 균주의 비율이 뚜렷하게 증가 (OMT 에서 $5,000\~7,000$ unit/l 범위에 $71\%$; pFAC에서 $6,000\~7,000$ unit/L 범위에 $47\%$) 하는 것으로 확인되었다. 이로부터 polyketide 생합성 경로와 AVM $B_{1a}$의 생합성 경로의 이해를 통해 수행된 rational screening 전략이 AVM $B_{1a}$ 고생산성 뿐만 아니라 고 안정성의 특성을 갖는 균주를 선별하는데 매우 효율적임을 알 수 있었다.

Electronic Spectroscopy and Ligand Field Analysis of $\Lambda$-fac-Tris(L-alaninato)chromium(III)

  • Choi, Jong-Ha
    • Journal of Photoscience
    • /
    • 제3권1호
    • /
    • pp.43-47
    • /
    • 1996
  • The 77 K emission and excitation, and room-temperature UV-visible spectra of $\Lambda$-fac[Cr(L-ala)$_3$] (ala = alanine anion) have been measured. The ten electronic transitions due to spinallowed and spin-forbidden are assigned. With the observed electronic transition energies, ligand field optimizations have been performed to determine the bonding properties of L-alanine anion toward chromium(III). The angular overlap model (AOM) parameters obtained indicate that it is electron-donating ligand which has values of e$_{\sigma}O$, e$_{\pi}O$, and e$_{\sigma}N$ slightly lower than those of glycine anion (gly). It seem that the decrease of the ligand field properties is due to steric effect of extra methyl group and inductive effect of adjacent carbonyl group.

  • PDF

배관감육관리에 활용되는 CHECWORKS 프로그램의 열수력해석 방법론 검증에 관한 연구 (A Study on the Verification of Network Flow Analysis Methodology of CHECWORKS Program used in Pipe Wall Thinning Management)

  • 서혁기;황경모
    • Corrosion Science and Technology
    • /
    • 제12권2호
    • /
    • pp.79-84
    • /
    • 2013
  • In general, pipelines at nuclear power plants are affected by various types of degradation mechanisms and may be ruptured after gradually thinning. FAC (Flow-Accelerated Corrosion) is typical aging mechanism affecting the secondary side piping system. In Korea nuclear power plants, CHECWORKS program have been used for management of wall thinning damages. However, sometimes, CHECWORKS program shows wrong results at the stage of NFA (Network Flow Analysis) in case of complex pipelines. This paper describes the calculation results of pressure drop in a complex pipeline and single line by using the CHECWORKS program and the analysis results are compared with those of engineering calculation results including errors between them.

원전감육배관 UT 두께측정 결과의 신뢰도 평가를 위한 다자비교시험 (Round Robin Test for Reliability Evaluation of Ultrasonic Thickness Measurement Results in Nuclear Power Plant Pipelines)

  • 이승준;이원근;이준현;이성호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.1702-1707
    • /
    • 2007
  • The reduction of pipe-thickness induced by flow accelerated corrosion (FAC) is one of the most serious problems on the maintenance of piping system in nuclear power plants (NNP). If the thickness of a pipe component is reduced below the critical level, it cannot sustain pressure and consequently results in leakage or rupture. For this reason, wall thinning by FAC has been inspected in secondary side piping systems in NPPs. In this research Round Robin Test (RRT) was conducted to verify confidence of wall thinning measurement system in NPP. 12 inspectors from 3 companies participated and 23 specimens were used according to standard practice in RRT. The gage R&R analysis was introduced in regard to repeatability and reproducibility that are affected to measurement system errors. Confidence intervals of thickness measurement system were obtained.

  • PDF

원전 2차계통의 수화학 변화가 배관감육에 미치는 영향 분석 (Analysis of Pipe Wall-thinning Caused by Water Chemistry Change in Secondary System of Nuclear Power Plant)

  • 윤훈;황경모;문승재
    • Corrosion Science and Technology
    • /
    • 제14권6호
    • /
    • pp.325-330
    • /
    • 2015
  • Pipe wall-thinning by flow-accelerated corrosion (FAC) is a significant and costly damage of secondary system piping in nuclear power plants (NPPs). All NPPs have their management programs to ensure pipe integrity from wall-thinning. This study analyzed the pipe wall-thinning caused by changing the amine, which is used for adjusting the water chemistry in the secondary system of NPPs. The pH change was analyzed according to the addition of amine. Then, the wear rate calculated in two different amines was compared at the steam cycle in NPPs. As a result, increasing the pH at operating temperature (Hot pH) can reduce the rate of FAC damage significantly. Wall-thinning is affected by amine characteristics depending on temperature and quality of water.

다봉성 함수의 최적화를 위한 향상된 유전알고리듬의 제안 (An Enhanced Genetic Algorithm for Optimization of Multimodal)

  • 김영찬;양보석
    • 한국지능시스템학회논문지
    • /
    • 제11권5호
    • /
    • pp.373-378
    • /
    • 2001
  • 본 연구에서의 다봉성 함수의 최적화를 위한 향상된 유전알고리듬을 제안하였다. 이 방법은 2개의 주요 단계로 구성된다. 첫째 단계는 유전알고리듬과 함수인정기준을 이용한 전역탐색단계이다. 초기해 집단에 대한 개체군의 소속도를 함수인정기준에 따라 결정한다. 둘째 단계는 개체군과 탐색최적해 사이의 유사도를 결정하고, 재구성된 탐색공간에서 단일점 탐색법에 의해 최적해를 탐색한다. 4개의 시험함수를 이용한 수치 예에 대해 종래의 방법과의 비교를 통하여 제안된 알고리듬이 모든 전역최적해 뿐만 아니라 국부최적해도 탐색이 가능함을 확인하였다.

  • PDF

Characteristics of the Amylase and its Related Enzymes Produced by Ectomycorrhizal Fungus Tricholoma matsutake

  • Hur, Tae-Chul;Ka, Kang-Hyun;Joo, Sung-Hyun;Terashita, Takao
    • Mycobiology
    • /
    • 제29권4호
    • /
    • pp.183-189
    • /
    • 2001
  • Extracellular amylase properties were examined with the mycelium of Tricholoma matsutake isolated from ectomycorrhizal roots of Pinus densiflora. The molecular weights of $\alpha$-amylase and glucoamylase were estimated as 34.2 kD and 11.5 kD, respectively, after eluted through Superdex 75 column. The optimum pH of the purified enzyme was found in a range of pH $5.0{\sim}6.0$, with a peak at pH 5.0. The activities of these enzymes were stable from $4^{\circ}C\;to\;30^{\circ}C$. The $\alpha$-amylase of T. matsutake readily hydrolyzed soluble starch and amylose-B, while it weakly hydrolyzed glycogen, dextrin, amylose and amylose-A. The main products of hydrolysis were confirmed to be glucose, maltose and maltotriose on the basis of the similarities in the thin layer chromatographic mobility.

  • PDF

SA106 Gr.C강 용접재에서의 유체가속부식(FAC) 현상 연구 (A Study on Flow-Accelerated Corrosion of SA106 Gr.C Weldment)

  • ;김준환;김인섭
    • Journal of Welding and Joining
    • /
    • 제19권3호
    • /
    • pp.334-341
    • /
    • 2001
  • The chemical and geometric effects of weld on flow-accelerated corrosion (FAC) of SA106 Gr.C low alloy steel pipe in 3.5wt% NaCl and simulated feedwater of nuclear power plant have been investigated by using rotating cylinder electrode. Polarization test and weight loss test were conducted and compared at rotating speed of 2000rpm (3.14m/s) with the variables of chemical and geometric parameters. The results showed that the chemical effects were relatively larger than the geometric effects, and the welded parts were the local anode and preferentially corroded, which could be explained by the differences between microstructural and compositional parameters. On the other hand, under active corrosion conditions, the heat affected zone were severely corroded and microstructural effects became the important role in the whole process.

  • PDF