• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.41-47
• /
• 2012

As a core process in the manufacture of state-of-the-art industrial technologies such as semiconductor and LCD, a clean room is the most important process which can affect the performance and quality of products drastically. Nevertheless, scientific research on comprehensive safety measures from a fire protection standpoint is not being carried out in Korea. This study aims to derive measures to improve smoke control systems by identifying performance and problems of smoke systems installed in clean rooms as an LCD manufacturing process and analyzing fire and evacuation simulations considering several scenarios. As a result of analysis of fires and smoke in a clean roomas an LCD manufacturing process, it is found to be necessary to stop air handling units through interlocking in case of a fire and exhaust smoke out of the room through the top of FAB in consideration of buoyancy of smoke. It is also found to be necessary to install quick response sprinkler heads and accessories to accelerate the response time, because the heat-accumulating performance of sprinkler heads decreases in this application. Despite its low density of dwelling due to the automation process, clean room is characterized by an array of complex production equipment and working environment requiring dustproof clothes, which makes it difficult to acquire evacuation safety performance. Thus, thorough control of danger factors in processes and periodic education and training are required. It is also necessary to establish a level of domestic technologies equivalent to the level of standards of advanced countries in fire protection.

• IE interfaces
• /
• v.10 no.1
• /
• pp.57-65
• /
• 1997

Less researches on AGV(Automated Guided Vehicle) path configurations have been conducted so far while more studies have been placed in determining AGV guide path directions and pick-up/drop-off station locations, and routing/dispatching/scheduling strategies. In practice plenty of concerns fall in preventing deadlock and simplifying AGV system control through an appropriate AGV path configuration. In order to meet those requirements, a new AGV path configuration, inter-loop stocker type is introduced here. The stocker serves as relaying material between loops as well as stocking material. Automated material handling systems using AGVs play an important role in semiconductor industry including TFT LCD and memory/non-memory chip. A practical example of implementing the inter-loop stocker concept successfully in the TFT LCD fab is presented in this paper.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.269-273
• /
• 2001

Semiconductor wafer fabrication is a business of high capital investment and fast changing nature. To be competitive, the production in a fab needs to be effectively planned and scheduled starting from the ramping up phase, so that the business goals such as on-time delivery, high output volume and effective use of capital intensive equipment can be achieved. In this paper, we propose Stand Alone layout and In-Line layout are analyzed and compared while varying number of device variable changes. The comparison is performed through simulation using ProSys; a window 98 based discrete system simulation software, as a tool for comparing performance of two proposed layouts. The comparison demonstrates that when the number of device variable change is small, In-Line layout is more efficient in terms of production quantity. However, as the number of device variable change is more than 14 titles, Stand Alone layout prevails over In-Line layout.

• Korean Journal Plant Pathology
• /
• v.12 no.1
• /
• pp.80-84
• /
• 1996

토양에서 분리한 방선균류(actinomycetes) GT103 균주의 배양여액 및 균체추출물은 담배의 주요 병원균인 담배 줄기속마름병균(Erwinia carotovora subsp. carotovora), 담배 탄저병균(Colletotrichum tabacum), 담배역병균(Phytophthora nicotianae var. nicotianae)등에 강한 항균활성을 보였다. 항균활성물질은 용매 추출, silica gel chromatography, HPLC 등을 실시하여 분리.정제하였으며 UV, IR, FAB-MS, \ulcornerH-NMR, \ulcornerC-NMR 분석결과 actinomycin group의 펩타이드계 항생 물질인 actinomycin C\ulcorner로 동정되었다. 이 활성물질의 담배 탄저병에 대한 방제효과는 50$\mu\textrm{g}$/ml 농도에서 100%, 10$\mu\textrm{g}$/ml 농도에서 90%의 방제효과를 보였다.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.39-43
• /
• 2008

Productivity is one of the performance indices of the semiconductor equipment in manufacturing viewpoint. Among many ways tried and adopted for improvement of the productivity of the FAB equipment, variation of equipment configuration was considered and its effect on the throughput was analyzed. Parallel machine cycle charts that were generated based on the equipment log were used in the analysis. Efficiency of the equipment due to change of the structure and the probability of the usage in the manufacturing process were examined. The results showed that the modification of the control algorithm in the equipment and the redistribution of the process time for each process and transfer module along to the change in the structure enhance the throughput of the equipment.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.1
• /
• pp.9-13
• /
• 2007

Hexane extract of Porteresia coarctata (Roxb.) exhibits a toxic effect on the tissues of Spodoptera litura (F) while fed at the dose of 1000 and 2000 ppm thoroughly mixing with castor leaves (Ricinus communis L) after dissolving in DMSO at late fourth instar whereas only DMSO treated castor leaves were fed to control group. The larvae were put to rear at $28^{\circ}C{\pm}1^{\circ}C$, $76{\pm}4%$ R.H. under 12 L + 12 D photoperiodic regime. In test group insects substantial reduction of protein and DNA content was marked in fat body and midgut tissues compared to DMSO treated control group. The significant biochemical alterations in the midgut tissues and fat body of test group insects indicate the insecticidal property of the said plant extract that could be tested in facilitating the phenomenal stride in Integrated Pest Management.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.826-832
• /
• 2010

A total of ninety swine ($79.0{\pm}2.2\;kg$) were employed for 58 d to determine the meat quality of pigs fed fermented agricultural by-products (FAB) mainly consisting of brewers grain shell. FAB was replaced with commercial feed at dietary levels of 20%, 40%, 60%, 80%, and 100% (T1) and 30%, 60%, 100%, 100%, and 100% (T2) at 1, 2, 3, 4 and 5-9 wk, respectively. Compared with the control (CON) feed, FAD feed had lower moisture and nitrogen-free extract content, and higher crude fat, crude fiber, and total calorie (p<0.05). The protein content, amino acid profile, and pH values of pork loin were not affected by dietary treatment. However, higher moisture, crude ash, and meat cholesterol, and lower fat, were found in CON compared with treatment (p<0.05). FAB treatment significantly improved drip loss and cooking loss value (p<0.05), and increased the CIE $L^*$ values of loin and back-fat surface, whereas it decreased the CIE $a^*$ values of loin surface (pp<0.05). The results indicate that dietary FAB affected meat cholesterol and fat content, and improved drip loss and cooking loss, but had no affect on amino acid composition.

• Korean journal of applied entomology
• /
• v.29 no.4
• /
• pp.252-256
• /
• 1990

Viral insecticides were formulated with Spodoptera litura nuclear polyhedrosis virus and different U.V. protectants based on white carbon, molasses, and white carbon and molasses mixture to use as microbial control agents. Effect of rainfall on the attachment of formulated viruses to leaves was no different between the treated and the non-treated experiment. Persistence of the formulations was lated 5 days on the surface-sprayed leaves and 12 days on the under-sprayed leaves which was showing 60% mortality. Total mortality of the viral insecticides was more than 97% with no differences among them. Field evaluation of three viral insecticides in soybean field was very successful then carried out in Chinju, a southern part of Korea. Mortality by the formulation in the field during 14 days was more than 93%, but the formulations contained molasses showed phytotoxicity on soybean leaves. Spray effect of the viral insecticides was begun to appear from 7 days later than that of chemical insecticide.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.593-600
• /
• 2010

In this paper, High brightness LED (light-emitting diodes) driver IC (integrated circuit) using new current sensing circuit is proposed. This LED driver IC can provide a constant current with high current precision over a wide input voltage range. The proposed current-sensing circuit is composed of a cascode current sensor and a current comparator with only one reference voltage. This IC minimizes the voltage stress of the MOSFET (metal oxide semiconductor field effect transistor) from the maximum input voltage and has low power consumption and chip area by using simple-structured comparator and minimum bias current. To confirm the functioning and characteristics of our proposed LED driver IC, we designed a buck converter. The LED current ripple of the designed IC is in ${\pm}5%$ and a tolerance of the average LED current is lower than 2.43%. This shows much improved feature than the previous method. Also, protections for input voltage and operating temperature are designed to improve the reliability of the designed IC. Designed LED driver IC uses 1.0 ${\mu}m$ X-Fab. BiCMOS process parameters and electrical characteristics and functioning are verified by spectre (Cadence) simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.9-9
• /
• 2010

In this paper, High Brightness LED driver IC using new current sensing circuit is proposed. This LED driver IC can provide a constant current with high current precision over a wide input voltage range. The proposed current-sensing circuit is composed of a cascode current sensor and a current comparator with only one reference voltage. This IC minimizes the voltage stress of the MOSFET from the maximum input voltage and has low power consumption and chip area by using simple-structured comparator and minimum bias current. The LED current ripple of the designed IC is in ${\pm}5%$ and a tolerance of the average LED current is lower than 2.43%. This shows much improved feature than the previous method. Also, protections for input voltage and operating temperature are designed to improve the reliability of the designed IC. Designed LED driver IC uses $1{\mu}m$ X-Fab. BiCMOS process parameters and electrical characteristics and functioning are verified by spectre(Cadence) simulation.