• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.77-78
• /
• 2020

An alkaline activator was synthesized by dissolving waste glass powder (WGP) in NaOH-4M solution to explore its effects on the Class-C fly ash (FA) and ground granulated blast furnace slag (GGBS) based alkali-activated material (AAM). The compressive strength and porosity were measured, and (SEM-EDX) were used to study the hydration mechanism and microstructure. Results indicated that the composition of alkali solutions was significant in enhancing the properties of the obtained AAM. As the amount of dissolved WGP increased in alkaline solution, the silicon concentration increased, causing the accelerated reactivity of FA/GGBS to develop Ca-based hydrate gel as the main reaction product in the system, thereby increasing the strength. Further increase in WGP dissolution led to strength loss, which were believed to be due to the excessive water demand of FA/GGBS composites to achieve optimum mixing consistency. Increasing the GGBS proportion in a composite also appeared to improve the strength which contributed to develop C-S-H-type hydration.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.635-640
• /
• 2016

Although microbial fuel cell (MFC) can produce electricity from organics in wastewater, nitrogen removal is required for application of process for wastewater treatment plant. This study developed flat-panel air-cathode MFCs (FA-MFCs) comprised of two large separator electrode assemblies (SEAs) and evaluate total nitrogen removal according to three inoculum sources and pre-nitrification acclimation. The nitrification efficiencies were >99% regardless of inoculum sources under the phase for pre-nitrification acclimation. The total nitrogen removal efficiencies of FA-MFCs without pre-nitrification acclimation were the highest at the low organic conditions (<300 mg-COD/L) under the phase for nitrification and denitrification. The increase of organic concentration influenced the total nitrogen removal efficiency, positively. The organics were removed >95% but were not used for heterotrophic denitrification totally. This study suggests that application of FA-MFC system for wastewater treatment can allow the simultaneous removal of organic and nitrogen compounds, although this affects the low electricity production.

• The Journal of Korean Philosophical History
• /
• no.42
• /
• pp.233-258
• /
• 2014

This article investigates the concept of the xing(性) used by Hu Hong. Hu Hong's philosophical system considered to top priority for xing is called xingbunlun(性本論), and he suggested the characteristics of xing as follows. First, Hu Hong regarded xing as the fundamental of whole world and related to the specific individual things, so he constructed the concept of xing in the perspective of ontology. Namely while xing is ti(體) the root of all the world, it is the realization of the uniqueness of the individual things. Also he considered xing which of the ontological aspect developed various psychological aspect contained xin (心), qing(情), yu(欲), etc. Seond, As Hu Hong regulated that wei fa(未發) is xing and yi fa(已發) is xin, he defined the ideal relation between xing and xin as xingtixinyong(性體心用). And he considered that the sage and the ordinary peoples are equal in the xing's aspect of wei fa, but they are not equal in ability of the xin in the aspect of wei fa. Hu Hong thought that the only sage realized the ideal relation between xing and xin in this world, because he keep his mind silent. So Hu Hong suggested the possibility of moral cultivation to the ordinary peoples, expressing that human nature realized the function of the mind(成性), in order that they realized ideal relation by following ren(仁). Third, unlike the traditional notion, Hu Hong understood the meaning of xing in the aspect of ontology. He interpreted the shan(善) of xingshan(性善) as the meaning of exclamation, which implied that "the innate goodness of human nature(性善)" meant "Human nature is good." Because Hu Hong thought that the meaning of xing transcended the relative concept of good and evil, and accepted the whole world affirmatively. In the opinion of Hu Hong, as the concept of xing had two ways of intentionality; likes and dislikes(好惡), things formed relationship with other in this world. Then the concept of good and evil of the ethical value judgement occurred.

• KNOM Review
• /
• v.23 no.1
• /
• pp.18-25
• /
• 2020

Recently, a research on a smart factory was developed from a concept of factory automation(FA) to the formation of collecting and analyzing data. This trend is accelerated as the development of communication technology(5G) and IoT devices are developed in various ways according to the field situation. In addition, digital transformation has been actively conducted in the strengthening corporate competitiveness, and various optimization studies are being conducted through process re-adjustment by combining data received from various IoT equipment and automated facilities. Therefore, in this paper, we propose a system architecture and its related components in diagnosing and repairing facility failure using a prediction system which is one of the related researches.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.56-62
• /
• 2012

The results presented in this paper form part of an investigation into the optimization of a ternary blended cementitious system based on ordinary Portland cement (OPC)/blast furnace slag(BFS)/fly ash(FA) for the development of ultra high strength concrete. Concrete covering a wide range of BFS/FA blending proportions were investigated. Compressive strength at the ages of 3, 7 and 28 days for concrete specimens containing 0%, 10%, 20% and 30%FA along with 0%, 30%, 40% and 50%BFS as partial cement replacement at a water-binder ratio of 0.18 were investigated. Tests on porosity and pore size distribution were conducted using mercury intrusion porosimetry. The results show that the combination of FA10 and BFS30 can improve both short- and long-term properties of concrete as results of reducing of pores larger than 50nm.

• Smart Media Journal
• /
• v.2 no.1
• /
• pp.8-16
• /
• 2013

The significant enhancement of the edge portion of computer networks including user-side machines and last mile network links encourages the research of the overlay network based data dissemination systems. Varieties of overlay network based data dissemination systems has distinct purposes, and each of them has a proper structure of an overlay network and a efficient communication protocol. In this paper, overlay network based data dissemination systems for Flash Dissemination, whose target is the distribution of relatively small size data to very large number of recipients within very short time, are explored. Mainly two systems, RECREW and FaReCAST, are introduced and analyzed in the aspects of design considerations for overlay networks and communication protocols. According to evaluations for flash dissemination scenarios, it is observed that the proposed overlay network based flash dissemination systems outperforms the previous overlay network based multicasting systems, in terms of the reliability and the dissemination delay. Moreover, the theoretical analysis of the reliability of data dissemination is provided by analysing FaReCAST.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.105-108
• /
• 2001

In this paper, "The PLC Controlling on Web Browser" is designed and implemented to remote control and to monitor FA system. Protocol bidirectional communication with PLC is written and sotted. Then Administration system sets Web server and JAVA Sevelet Program. The client system located at the monitoring Web browser are a JAVA Sevelet base system, and sends some commands to the server system which guards and controls the PLC system. The commands are delivered to the server system and the driver software exists in the server controls the PLC system directly.

• 연구논문집
• /
• s.26
• /
• pp.57-68
• /
• 1996

Recently, a lot of researches on material handling system are actively studied for realization of FA(Factory Automation), FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing). Management and application of material handling system are precondition technologies playing an important part in integration of production system including manufacturing. assemhly, and inspection cell. In this paper, the general situation of automation technology is investigated and technology level is analyzed in comparision with an advanced country. And the operation trend and part of material handling system including AS/RS, AGV, and Conveyor, are studied. And also technologies related to material handling system in the inside and outside of the country are studied.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.540-543
• /
• 1986

In this article, recent trends of technology in design of CNC system for machine tools which has increased in number and applications by needs for FA(Factory Automation), save of labor in various industries, are described. These technology improvements in CNC system take place especially in the field of performance, reliability, compactness, price, etc. From these technology improvements, the theme of "performance improvements of CNC system" are selected and mostly described in this article. Also, the major features of a CNC system product of our company and its characteristics in system design are briefly described.described.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.4
• /
• pp.45-55
• /
• 1997

According to the increase of factory-automation in the field of production, the importance of autonomous guided vehicle's(AGV) role is also increased. The study about an active and effective controller which can flexibly prepare for the changeable circumstance is in progressed. For this study, the research about action base system to evolve by itself is also being actively considered. In this paper, we composed an active and effective AGV fuzzy controller to be able to do self-organization. For composing it, we tuned suboptimally membership function using genetic algorithm(GA) and improved the control efficiency by the self-correction and generating the control rules. Self-organizing controlled(S0C) fuzzy controller proposed in the paper is capable of self-organizing by using the characteristics of fuzzy controller and genetic algorithm. It intuitionally controls AGV and easily adapts to the circumstance.