• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.377-381
• /
• 1999

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for induction motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response characteristic results and high performance features. The system can be adapted variform motor drive system.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.95-98
• /
• 2002

This paper presents a study on DSP(TMS320F240) controller design for multi-axes transportation system using BLDC servo motor. This BLDC servo motor controller was realized with DSP(Digital Signal Processor) and IPM (Intelligent Power Module). The multi-axes transportation system needs torque, speed, position control of servo motor for variable action. This paper implements those servo control with vector control and space vector modulation technique. As CPU of controller DSP(TMS320F240) is adopted because, it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI(Serial Peripheral Interface) port and input/output port etc. The controller of multi-axes transportation system consists of 3-level hierarchy structure that main host PC manages three sub DSP system which transfer downword command and are monitoring the states of end servo controllers. Each sub DSP system operates eight BLDC servo controllers which control BLDC servo motor using DSP and IPM Between host system and middle digital signal processor communicate with RS-422, between main processor and controller communicate with SPI port.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.988-990
• /
• 2000

This paper presents the software control of a brush-less DC motor. Not only speed and current controls but also a real-time identification of the motor parameters can be implemented by software using the digital signal processor (DSP) TMS320F240. The DSP Controller TMS320F240 from Texas Instruments is suitable for a wide range of motor drives. TMS320F240 provides a single chip solution by integrating on-chip not only a high computational power but also all the peripherals necessary for electric motor control. The main benefits are increased system reliability and cost reduction of the overall system. The present paper describes how a speed controlled brushless DC drive can be implemented using TMS320F240.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.357-360
• /
• 1998

본 논문에서는 TI(Texas Instruments)사의 DSP칩 TMS320F240을 이용한 벡터드라이브 설계를 한다. TMS320F240은 서보모터드 라이브에 적합하게 상품화 된 칩으로 산업용 로봇제어에 필요한 대부분의 주변회로를 포함하고 있다. 이를 이용해서 제어기를 구성하면 적은 비용으로 신뢰성 높은 제어기를 구성할 수 있다. 드라이브는 크게 제어회로부와 파워회로부로 나누어서 설계했으며, AC서보모터에 벡터제어로 실제적용을 했다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1025-1030
• /
• 2001

As the pre-stage of making 3D stabilizing systems, at this paper designed 2D stabilizing system. This is composed of two axes stabilizing platform to preserve targeted direction while vehicle is moving. The system maintains stabilization by recovering error using the rate gyro with DSP TMS320F240 as controller, vibratory rate gyro (Tokimec co. TFG -l60D) as gyro scope, SD1015B52-1·SD1004C04-l/DM1015B DM1004C as direct drive driver/motor, PI control as control algorithm. This paper got a comparably good stabilization.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2587-2589
• /
• 1999

In this paper, we propose a new control scheme for a PWM inverter using digital control. Digital control has various advantages in comparison with conventional analogue control. It can achieve high frequency switching of inverter and can be little influenced for temperature variations and aging of devices. This digitally-controlled PWM inverter is implemented using a Digital Signal Processor(DSPTMS320F240). The simulation results are given to verify the DSP based PWM inverter design and implementation.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2000

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response and motion control characteristic results, and high performance features in general purposed 2.2[kW] machine. The system can be adapted variform motor drive system.

• KIPE Magazine
• /
• v.9 no.3
• /
• pp.13-17
• /
• 2004

근래에 Texas Instruments(TI)사에서 개발된 TMS3320LF240x는 고정 소숫점 방식의 16비트 DSP으로써 저가, 고성능용으로 개발된 칩이다. 이 DSP는 비교적 빠른 계산속도에 다양한 입력/출력장치를 내장하고 있으므로 DSP 장점과 마이크로제어기의 장점을 모두 가지고 있다. 특히 Flash 메모리, RAM 등 메모를 포함하여 8-16채널 이상 A/D 컨버터, Timer, 직력통신과 함께 PWM인버터/컨버터용 PWM펄스까지 출력시킬 수 있으므로, 이 DSP는 각종 전동기 구동시스템과 SUP, 능동필터 제어 등 전력전자 분야에서 적합하게 설계된 DSP로 상당히 많이 사용되고 있다. 그런데 TMS320LF240x는 고정 소숫점 방식의 16비트 DSP이므로 연산량이 많은 시스템에서는 적용하기 힘들며, 또는 저장할 데이터량이 많은 제어시스템일 경우에는 내장된 flash 및 SRAM 등 메모리 용량이 부족하는 등 사용하는데 문제가 있을 가능성이 있다.(중략)

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.615-619
• /
• 2000

This paper presents an implementation of digital motion control system of Surface Permanent-Magnet Synchronous Motor(SPMSM) vector drives with a direct torque control(DTC) using the 16bit DSP TMS320F240 The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent control for motors which can be yield enhanced operation fewer system components lower system cost increased efficiency and high performance The system presented are stator flux and torque observer of stator flux feedback model that inputs are current and voltage sensing of motor terminal and angle for a low speed operating area two hysteresis band controllers an optimal switching look-up table and IGBT voltage source inverter by using fully integrated control software. The developed control system are shown a good motion control response characteristic results and high performance features using 1.0Kw purposed servo drive SPMSM.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.79-84
• /
• 2000

This paper presents an implementation of digital position control system for an induction motor vector drives by a direct torque control(DTC) using the 16bit DSP TMS320 F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controller for motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are stator flux and torque observer using current model that inputs are current sensing of motor terminal and rotor angle for a low speed operating area, two hysteresis controller, optimal switching look-up table, and IGBT voltage source inverter by fully integrated control software. The developed control system are shown a good motion control response characteristic results and high performance features using 2.2Kw general purposed induction motor.