• Journal of Biosystems Engineering
• /
• v.37 no.4
• /
• pp.233-244
• /
• 2012

Purpose: The kinetic evaluation was performed for swine manure (SM) degradation and biogas generation. Methods: The SM was anaerobically digested using batch digesters at feed to inoculum ratio (F/I) of 1.0 under mesophilic conditions ($36.5^{\circ}C$). The specific gas yield was expressed in terms of gram total chemical oxygen demand (mL/g TCOD added) and gram volatile solids added (mL/g VS added) and their effectiveness was discussed. The biogas and methane production were predicted using first order kinetic model and the modified Gompertz model. The critical hydraulic retention time for biomass washout was determined using Chen and Hashimoto model. Results: The biogas and methane yield from SM was 346 and 274 mL/ TCOD added, respectively after 100 days of digestion. The average methane content in the biogas produced from SM was 79% and $H_2S$ concentration was in the range of 3000-4108 ppm. It took around 32-47 days for 80-90% of biogas recovery and the TCOD removal from SM was calculated to be 85%. When the specific biogas and methane yield from SM (with very high TVFA concentration) was expressed in terms of oven dried volatile solids (VS) basis, the gas yield was found to be over estimated. The difference in the measured and predicted gas yield was in the range of 1.2-1.5% when using first order kinetic model and 0.1% when using modified Gompertz model. The effective time for biogas production ($T_{Ef}$) from SM was calculated to be in the range of 30-45 days and the critical hydraulic retention time ($HRT_{Critical}$) for biomass wash out was found to be 9.5 days. Conclusions: The modified Gompertz model could be better in predicting biogas and methane production from SM. The HRT greater than 10 days is recommended for continuous digesters using SM as feedstock.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.1
• /
• pp.5-8
• /
• 1999

Weight records from birth to calving and calving scores of 407 two-year old heifers and weights of their offspring from birth to one year of age were used to study the effects of sire birth weight on maternal traits of their female progeny. The heifers ($G_1$) were Ihe progeny of 81 sires ($G_0$) and were classified into three classes based on their sires' birth weights (High, Medium and Low). The heifers were from three distinct breed-groups and were mated to bulls with medium birth weights within each breed-group to produce the second generation ($G_2$). The data were analyzed using a covariance model. The female progeny of high birth-weight sires were heavier from birth to calving than those sired by medium and low birth-weight bulls. The effect of sire birth weight on calving difficulty scores of their female progeny was not significant. Grand progeny (G2) of low birth-weight sires were lighter at birth than those from high birth-weight sires (p < 0.05) but they did not differ significantly in weaning and yearling weights from the other two Grand progeny groups. The results indicated that using low birth weight sires would not result in an increase in the incidence of dystocia among their female progeny calving at two-year of age and would not have an adverse effect On weaning and yearling weights of their grand progeny.

• Journal of The Korean Astronomical Society
• /
• v.21 no.1
• /
• pp.79-95
• /
• 1988

To examine relations between stellar activity and rotation we estimated parameters of stellar activity such as $R'_{HK}$, $R'_{MgII}$, $R'_{CII}$, $R'_{CIV}$ and $R'_{X-ray}$ from the published data which measure the activity levels of stellar chromospheres, transition regions and coronae. In the present study we considered only the main sequence stars in an attempt to minimize the influence of other stellar parameters such as radius, age and stellar convection on stellar activity since they are also known to affect the magnetic field generation. In the present analysis we selected only those stars that satisfy the following conditions: (1) flux measurements are available together with Ca II fluxes and (2) rotation periods are determined by Ca II observations. We derived relations between the ${\bar{R}}ossby$ number $R_o$ and stellar activity $R'_{HK}$, $R'_{MgII}$, $R'_{CII}$, $R'_{CIV}$ and $R'_{X-ray}$ and assessed the relations by plotting $R'_{HK}$, $R'_{MgII}$ and $R'_{X-ray}$ against rotation period $P_{rot}$ for comparison with observations. From the comparison it is found that as far as the rotation-activity relation is concerned, (1) normalized surface flux $R'_{HK}$ is better than the surface flux $F'_{HK}$, in the sense that $R'_{HK}$ differentiates the color dependence better and (2) $R'_{HK}$ defined by Rutten (1984) describes the observations notably better than $R'_{HK}$ of Noyes et al. (1984).

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.5
• /
• pp.12-23
• /
• 1994

The two-phase flow is observed in power plants, chemical process plants, and refrigeration systems etc., and it is very important to solve the heat transfer mechanism of a boiler, an automic reactor, a condenser and various types of evaporators. Recently, the problem of two phase heat transfer is braught up in many regions with development of energy saving technique. In flow boiling system it is necessary to store data in each condition because the heat transfer characteristics of flow boiling region vary by the change of flow pattern and the magnetude of heat flux to tube length, and be subtly affected by the flow and heating condition. So basic study for knowing flow pattern in heat transfer region and the relation between heat transfer characteristic and flow condition is desired to accumulate data in wide variety of liquid and flow system in the study of heat transfer of two phase flow. In this study R-113 was selected as working fluid whose properties were programmed by least square method, and experiment was conducted in the region of mass flow $1.628{\times}10^6$~$4.884{\times}10^6$/kg/$m^2$hr with inlet subcooling 10~3$0^{\circ}C$, sustaining test section inlet pressure to 1.5kg$_f$/$cm^2$abs.

• Journal of Ginseng Research
• /
• v.35 no.3
• /
• pp.375-383
• /
• 2011

In the previous report, we have demonstrated that ginsenoside Rc, one of major ginsenosides, is a major component for the restoration for normal growth of worms in cholesterol-deprived medium. In the present study, we further investigated the roles of minor ginsenosides, such as ginsenoside $Rh_1$ and $Rh_2$, ginsenoside metabolites such as compound K (CK), protopanaxadiol (PPD), and protopanaxatriol (PPT) and ginsenoside epimers such as 20(R)- and 20(S)-ginsenoside $Rg_3$ in cholesterol-deprived medium. We found that ginsenoside $Rh_1$ almost restored normal growth of worms in cholesterol-deprived medium in F1 generation. However, supplement of ginsenoside $Rh_2$ caused a suppression of worm growths in cholesterol-deprived medium. In addition, CK and PPD also slightly restored normal growth of worms in cholesterol-deprived medium but PPT not. In experiments using ginsenoside epimers, supplement of 20(S)- but not 20(R)-ginsenoside $Rg_3$ in cholesterol-deprived medium also almost restored worm growth. These results indicate that the absence or presence of carbohydrate component at backbone of ginsenoside, the number of carbohydrate attached at carbon-3, and the position of hydroxyl group at carbon-20 of ginsenoside might plays important roles in restoration of worm growth in cholesterol-deprived medium.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.194-201
• /
• 2011

The air flow supplied to a fuel cell system is one of the most significant factors in determining fuel efficiency. The conventional method of controlling the air flow is to fix the oxygen supply at an estimated constant rate for optimal efficiency. However, the actual optimal point can deviated from the pre-set value due to temperature, load conditions and so on. In this paper, the maximum efficiency point tracking (MEPT) algorithm is proposed for finding the optimal air supply rate in real time to maximize the net-power generation of fuel cell systems. The fixed step MEPT algorithm has slow dynamics, thus it affects the overall efficiency. As a result, the variable step MEPT algorithm is proposed to compensate for this problem instead of a fixed one. The complete small signal model of a PEM Fuel cell system is developed to perform a stability analysis and to present a design guideline. For a design example, a 1kW PEM fuel cell system with a DSP 56F807 (Motorola Inc) was built and tested using the proposed MEPT algorithm. This control algorithm is very effective for a soft current change load like a grid connected system or a hybrid electric vehicle system with a secondary energy source.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.197-205
• /
• 2017

We investigate the slat noise generation mechanism by using large-eddy simulation (LES) and simple source modeling based on linearized Euler equations. An incompressible LES of an MD 30P30N three-element airfoil in the high-lift configuration is conducted at $Re_c=1.7{\times}10^6$. Using the total derivative of the hydrodynamic pressure (DP/Dt) acquired from the incompressible LES, representative noise sources in the slat cove region are characterized in terms of simple sources such as frequency-specific monopoles and dipoles. Acoustic radiation around the 30P30N multi-element airfoil is effectively computed using the Brinkman penalization method incorporated with the linearized Euler equation. The directivity pattern of $p^{\prime}_{rms}$ at $r=20c_{slat}$ in the multiple sources is closely compared to that obtained by the application of the LES/Ffowcs-Williams and Hawking's methods to the entire flow field. The power spectrum of p' at ${\theta}=290^{\circ}$ is in good agreement with the data reported in BANC-III, especially the broadband part of the spectrum with a decaying slope ${\propto}f^{-3}$.

• Journal of Environmental Health Sciences
• /
• v.29 no.2
• /
• pp.7-15
• /
• 2003

Di-2-ethylhexyl phthalate (DEHP), is a widely used plasticizer known to be a suspected endocrine disrupter, but its exact effects on aquatic organisms are not yet known. When Japanese medaka (Oryzias latipes) were exposed from the time of hatching to 3 months of age to an aqueous DEHP solution at nominal concentrations of 1, 10, and 50 $\mu\textrm{g}$/l, DEHP treated female fish showed distinct reproductive effect. And the midge (Chironomus riparius.). an aquatic invertebrate, was exposed to DEHP to evaluate the effects on reproductive processes via sediment toxicity. The test endpoints included emergence, sex ratio, fecundity, and the viability of F1 offspring egg ropes. The result implied that the normal developmental and/or reproductive processes in C. riparius had been disrupted when exposed to DEHP, the effect also being displayed in the next generation. In summary, DEHP hinders the development of reproductive organs in the female Japanese medaka and C. riparius.

• Molecules and Cells
• /
• v.37 no.2
• /
• pp.149-160
• /
• 2014

Plant breeders have focused on improving plant architecture as an effective means to increase crop yield. Here, we identify the main-effect quantitative trait loci (QTLs) for plant shape-related traits in rice (Oryza sativa) and find candidate genes by applying whole genome re-sequencing of two parental cultivars using next-generation sequencing. To identify QTLs influencing plant shape, we analyzed six traits: plant height, tiller number, panicle diameter, panicle length, flag leaf length, and flag leaf width. We performed QTL analysis with 178 $F_7$ recombinant inbred lines (RILs) from a cross of japonica rice line 'SNU-SG1' and indica rice line 'Milyang23'. Using 131 molecular markers, including 28 insertion/deletion markers, we identified 11 main- and 16 minor-effect QTLs for the six traits with a threshold LOD value > 2.8. Our sequence analysis identified fifty-four candidate genes for the main-effect QTLs. By further comparison of coding sequences and meta-expression profiles between japonica and indica rice varieties, we finally chose 15 strong candidate genes for the 11 main-effect QTLs. Our study shows that the whole-genome sequence data substantially enhanced the efficiency of polymorphic marker development for QTL fine-mapping and the identification of possible candidate genes. This yields useful genetic resources for breeding high-yielding rice cultivars with improved plant architecture.

• Journal of Plant Biotechnology
• /
• v.6 no.4
• /
• pp.221-227
• /
• 2004

Protocol was established for production of virus free healthy seeds using meristem ($0.3-0.5\;\cal{mm}$ in size) culture and field management under net house condition in tomato. The isolated meristem was found well established in MS liquid medium containing $0.1\;\cal{mg}\;1^{-1}\;of\;GA_3$. For shoot and root development either from primary meristem or from nodal segment of meristem derived plants, semisolid MS medium having $0.5\;\cal{mg}\;1^{-1}$ of IBA was found most effective. The elimination of the studied viruses (ToMV, CMV, ToLCV) in meristem-derived plants was confirmed by DAS-ELISA test. For field management of the virus eradicated meristem-derived plants, use of net house was found very effective measures to check viral vector visit and eventually infection. The meristem-derived plants were vigor and high yielder than the native seed derived plants and produced healthy seeds. Due to stop vector visit, no viral symptoms were observed in both $R_1\;and\;R_2$ plants cultivated in net house condition. Starting of viral infestation was observed in $R_2$ generation when they were planted in open house condition without control of vector visit. Therefore, for management of viral diseases, use of virus free meristem derived plantlets and their subsequent cultivation in soil under net house condition without using any vector killing insecticide can be recommended for producing healthy seeds in tomato. The developed protocol for environmentally healthy tomato seed production in Bangladesh may be used in the countries having similar tropical like environment conducive for viral vector visit.