• 기본간호학회지
• /
• 제16권2호
• /
• pp.232-241
• /
• 2009

Purpose: The purpose of this study was to analyze the importance, difficulty, and frequency of work (duties and tasks) done by nurses' in Outpatient Departments (OPD). Method: Data were collected using structured questionnaires, which included 11 duties and 92 tasks making up the OPD nurse's job. Questionnaires were completed by 286 nurses. Each duty and task was analyzed for importance, difficulty, and frequency (range 1-3). Results: The mean score for importance was $2.58{\pm}0.29$, for difficulty, $2.11{\pm}0.31$, and for frequency, $2.18{\pm}0.31$. OPD nurses recognized 'patient education and consultation' as important and difficult. However, in practice OPD nurses reported the most frequent task as 'support for medical services'. There was a significant difference in importance and difficulty of duties according to OPD nurses' university degree (F=3.693, p=.026; F=4.089, p=.018) and hospital size (F=4.274, p=.006; F=3.154, p=.025). However there were no differences in importance, difficulty, or frequency according to clinical experience in OPD. Conclusion: The findings indicate that OPD nurses must be able to do important and difficult duties and tasks, especially patient education and consultation. To have time for these uniquely nursing tasks, OPD nurses need to delegate 'preparation for medical service', and 'management of facility and environment' to nonmedical health-care workers.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.25-32
• /
• 2005

The purpose of this study was to examine an effect of fluoride recharging on fluoride release and surface change of fluoride-releasing restorative materials. Six commercially available fluoride releasing restorative materials (Fuji II LC Improved: FL, Compoglass F: CF, Dyract AP: DA, F2000: FT, Gradia Direct: GD, and Tetric Ceram: TC) were selected as experimental materials. Disk specimens were fabricated with split teflon mold to the final dimensions of 15 mm in diameter and 1 mm in thickness. Ten samples of each material were fabricated and stored in deionized water at $37^{\circ}C{\pm}1^{\circ}C$ for 3 months. Before fluoride recharging, all specimens were polished sequentially from #800 to #2000 emery papers. Fluoride recharging was done at 5-day interval using 2.0% NaF gel. The release of fluoride into the storage water was monitored using a fluoride ion electrode. Data were analyzed by one-way ANOVA and Tukey's multiple range test. The results obtained were summarized as follows; 1. Fluoride recharge capability were FL > CF > DA and TC group after 12 times exposure to 2.0% NaF gel (P<0.05). 2. All the experimental materials, except for FT group, showed the increase of fluoride release and surface roughness. 3. Fluoride-releasing rates returned to base line within 3 days.

• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.668-676
• /
• 2003

The effect of nozzle height on heat transfer of a hot steel plate cooled by an impinging liquid jet is not well understood. Previous studies have been based on the dimensionless parameter z/d. To test the validity of this dimensionless parameter and to investigate gravitational effects on the jet, stagnation velocity of an impinging liquid jet were measured and the cooling experiments of a hot steel plate were conducted for z/d from 6.7 to 75, and an inverse heat conduction method is applied for the quantitative comparison. Also, the critical instability point of a liquid jet was examined over a range of flow rates. The experimental velocity data for the liquid jet were well correlated with the dimensionless number 1/F $r_{z}$$^2$based on distance. It was thought that the z/d parameter was not valid for heat transfer to an impinging liquid jet under gravitational forces. In the cooling experiments, heat transfer was independent of z when 1/F $r_{z}$$^2$< 0.187(z/d = 6.7). However, it was found that the heat transfer quantity for 1/F $r_{z}$$^2$=0.523(z/d = 70) is larger 11% than that in the region for 1/F $r_{z}$$^2$=0.187. The discrepancy between these results and previous research is likely due to the instability of liquid jet.uid jet.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2136-2149
• /
• 1992

본 연구에서는 Gebhart등이 제시한 새로운 밀도식을 사용하여 경사진 등온평 판이 저온의 순수물속에 잠겨있을 때의 자연대류현상을 F.D.M 방법을 사용하여 수치해 석하였다. 이러한 수치 계산으로부터 등온 평판 주위의 속도, 온도분포 및 평균 누 셀트수를 각각 구하고, 주위물 온도 및 평판의 경사각이 등온 평판에 의한 유동 및 열 전달 현상에 미치는 영향을 구명하였다.또한 본 연구결과와 Riu등이 상사해석하여 구한 다중 정상 상태 영역에서의 결과들과 실험적 연구의 결과들을 상회 비교분석하였 다. 여기서 사용한 등온 평판은 기존의 연구들에서 많이 이용하고 있는 가장 이상적 인 등온면인 0.deg. C 얼음면을 택하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권8호
• /
• pp.1201-1206
• /
• 2008

The effects of free-range farming, compared to a conventional production system, on carcass and meat qualities were studied using black-feathered Taiwan native chickens. Twenty 16-week old females were purchased separately from a free-range farm and a conventional production farm and used for this study. The results showed similarities in the live weight (roughly 2.1 kg), dressing percentage (69%) and meat percentage (19%) of deboned leg quarter. Significant differences (p<0.05) found for the free-range chickens included: a higher percentage of meat for the breast, an increased crude protein content and chewiness value for the breast, but decreased crude fat content and lower hardness and fracturablility values for the leg quarter. Significantly higher L* values were found for the breast and leg meat of conventionally produced chickens, whereas no significant differences were found for WHC and purge loss between the breast and the leg, and between the two production systems as well. Results of sensory evaluation showed a significant preference for leg over breast meat (p<0.05). The scores of all the attributes including aroma, flavor, firmness, tenderness, juiciness and overall acceptability of leg meat from free-range chickens were slightly higher than for conventional chickens, while the reverse was true for breast meat, though no significant difference could be found. Free-range Taiwan native chicken appeared to yield the best of the results, with flavorful yet tender leg meat for higher sensory satisfaction, and high-protein but low-fat breast meat for healthier diet choice.

• 한국전기전자재료학회논문지
• /
• 제27권11호
• /
• pp.730-735
• /
• 2014

In this study, the temperature characteristics of electrostatic capacity and dielectric loss for the sample of Teflon film which is degradated at the $120^{\circ}C{\sim}200^{\circ}C$ temperature range in the oven for 10 hours has been measured in through the applied frequency range of 0.1 kHz~4,800 kHz at temperature of $50^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $170^{\circ}C$. Also, in the same conditions, the frequency characteristics of electrostatic capacity and dielectric loss for the sample of Teflon film has been measured in through the applied temperature range of $30^{\circ}C{\sim}70^{\circ}C$ on setting frequency of 0.1 kHz, 1 kHz, 10 kHz, 100 kHz. The results of this study are as follows. When the frequency range of 0.1 kHz~4,800 kHz applied to the sample of Teflon film, the electrostatic capacity has been measured at the temperature of $50^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $170^{\circ}C$. Through this measurement, it found that the electrostatic capacity decreased with increasing temperature. Regarding this result, may be it is because the electromagnetic coupling is degraded by thermal degradation. When the sample of Teflon film heated at $280^{\circ}C$ for 10 hours in oven, the dielectric loss has changed from unstable status to stabilizing status with increasing the degradation temperature in the $120^{\circ}C$, $160^{\circ}C$, $200^{\circ}C$ range. In this measurement, the two spectrums of dielectric loss appeared. It considers that this spectrum of dielectric loss appeared in 300 Hz is caused by the molecular motion of the C-F or OH group. Through this study, It found that the electrostatic capacity decreased with increasing frequency and temperature, and there is no change in dielectric loss, although the frequency increases.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권1호
• /
• pp.23-27
• /
• 1995

A selection experiment with Romney Marsh sheep was used to evaluate direct responses to selection. Two flocks were maintained; a) the selection line formed in 1979 by the Romney Group Breeders to select for high prolificacy, defined as the number of live lambs born per ewe joined per year and b) a control line, established in 1982, where flock replacements were chosen at random. Predicted responses per year of birth female group and per year respectively were 0.033 and 0.027 live lambs. The rate of predicted response per year was within the theoretical expected range from 0.01 to 0.03 of the mean. The rates of realized response in prolificacy per year of birth female group and per year respectively were 0.026 and 0.021. These estimates of realized responses represented between 0.01 and 0.02 of the control line mean per year.

• 한국버섯학회지
• /
• 제2권2호
• /
• pp.88-96
• /
• 2004

본 연구의 결과는 다음과 같다. 국내외에서 수집된 아위버섯 4균주(F-1, F-2, F-3, F-4)를 공시하여 우량 균주를 선발한 결과 균사생장이 빠르고 균사밀도가 좋은 F-2 균주를 선발하였다. 선발된 아위버섯균은 MYPA배지에서 균사생장이 가장 좋았으며, 균사생장 최적 온도는 $25{\sim}30^{\circ}C$이며 $30^{\circ}C$에서 가장 빨리 자랐다. 그리고 균사배양 최적 산도는 pH 5.0~6.0 이었다. 아위버섯균의 균사생장을 위한 최적배지조성은 탄소원에서는 다당류인 soluble starch이고 그 다음으로는 maltose였으며, 최적 탄소원인 soluble starch의 적정농도는 1%(w/w)였다. 질소원에서는 yeast extract 0.25%(w/w), malt extract 0.25%(w/w)를 혼합하였을 때 가장 빠른 생장속도를 보여주었으며, malt extract 만을 첨가하였을 때는 균사생장이 극히 부진하였다. 아위버섯균의 현미경 관찰 결과 일부 세포벽의 박벽화와 침식 현상이 관찰되었지만, 이 같은 현상이 광범위하게 관찰되지 않았다는 점에서 아위버섯균에 의한 리기다소나무재의 분해는 매우 미미한 것으로 사료된다. 아위버섯균에 의해 분해된 리기다소나무재의 편광현미경 관찰 결과 일부 세포의 S3에서 복굴절성이 감소하는 것으로 나타나 아위버섯균이 부분적으로 셀룰로스를 분해하고 있음이 관찰되었다. 그러나 이 같은 복굴절성이 소멸되는 가도관은 많지 않아 아위버섯균에 의한 리기다소나무재의 셀룰로스의 분해 역시 크지 않았음을 보여주고 있다. 아위버섯균의 졸참나무재의 분해결과 리기다소나무재에 비하여 방사조직과 축방향유세포에서 분해가 상당히 이루어졌고, 목섬유에서도 부분적으로 침식과 박벽화가 상당히 진행되었음을 알 수 있었다. Bavendam Test결과 아위버섯균은 탄닌산을 분해하여 갈색의 대사물질을 형성하여 전형적인 백색부후균의 부후형태를 나타내었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.599-602
• /
• 2005

In this paper, we have performed a study that modifies the CPW Pad configurations to improve an $f_{max}$ characteristic of metamorphic HEMT. To analyze the CPW Pad structures of MHEMT, we use the ADS momentum simulator developed by $Agilent^{TM}$. Comparing the employed structure (G/W = 40/100 m), the optimized structure (G/W = 20/25 m) of CPW MHEMT shows the increased $S_{21}$ by 2.5 dB, which is one of the dominant parameters influencing the $f_{max}$ of MHEMT. To compare the performances of optimized MHEMT with the employed MHEMT, DC and RF characteristics of the fabricated MHEMT were measured. In the case of optimized CPW MHEMT, the measured saturated drain current density and transconductance $(g_m)$ were 693 mA/mm and 647 mS/mm, respectively. RF measurements were performed in a frequency range of $0.1{\sim}110$ GHz. A high $S_{21}$ gain of 5.5 dB is shown at a millimeter-wave frequency of 110 GHz. Two kinds of RF gains, $h_{21}$ and maximum available gain (MAG), versus the frequency, and a cut-off frequency ($f_t$) of ${\sim}154$ GHz and a maximum frequency of oscillation ($f_{max}$) of ${\sim}358$ GHz are obtained, respectively, from the extrapolation of the RF gains for a device biased at a peak transconductance. An optimized CPW MHEMT structure is one of the first reports among fabricated 0.1 m gate length MHEMTs.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.46-51
• /
• 2005

We have developed control electronics to operate flux-locked loop (FLL), and analog signal filters to process FLL outputs for 64-channel Double Relaxation Oscillation SQUID (DROS) magnetocardiography (MCG) system. Control electronics consisting of a preamplifier, an integrator, and a feedback, is compact and low-cost due to larger swing voltage and flux-to-voltage transfer coefficients of DROS than those of dc SQUIDs. Analog signal filter (ASF) serially chained with a high-pass filter having a cut-off frequency of 0.1 Hz, an amplifier having a gain of 100, a low-pass filter of 100 Hz, and a notch filter of 60 Hz makes FLL output suitable for MCG. The noise of a preamplifier in FLL control electronics is $7\;nV/{\surd}\;Hz$ at 1 Hz, $1.5\;nV/{\surd}\;Hz$ at 100 Hz that contributes $6\;fT/{\surd}\;Hz$ at 1 Hz, $1.3\;fT/{\surd}\;Hz$ at 100 Hz in readout electronics, and the noise of ASF electronics is $150\;{\mu}V/{\surd}\;Hz$ equivalent to $0.13\;fT/{\surd}\;Hz$ within the range of $1{\sim}100\;Hz$. When DROSs are connected to readout electronics inside a magnetically shielded room, the noise of 64-channel DROS system is $10\;fT/{\surd}\;Hz$ at 1 Hz, $5\;fT/{\surd}\;Hz$ at 100 Hz on the average, low enough to measure human MCG.