• Journal of Astronomy and Space Sciences
• /
• 제29권3호
• /
• pp.321-328
• /
• 2012

We have designed a 30 cm cryogenic space infrared telescope for astronomical observation. The telescope is designed to observe in the wavelength range of 0.5~2.1 ${\mu}m$, when it is cooled down to 77 K. The result of the preliminary design of the support structure and support method of the mirror of a 30 cm cryogenic space infrared telescope is shown in this paper. As a Cassegrain prescription, the optical system of a 30 cm cryogenic space infrared telescope has a focal ratio of f/3.1 with a 300 mm primary mirror (M-1) and 113 mm secondary mirror (M-2). The material of the whole structure including mirrors is aluminum alloy (Al6061-T6). Flexures that can withstand random vibration were designed, and it was validated through opto-mechanical analysis that both primary and secondary mirrors, which are assembled in the support structure, meet the requirement of root mean square wavefront error < ${\lambda}/8$ for all gravity direction. Additionally, when the M-1 and flexures are assembled by bolts, the effect of thermal stress occurring from a stainless steel bolt when cooled and bolt torque on the M-1 was analyzed.

• 한국통신학회논문지
• /
• 제18권8호
• /
• pp.1102-1107
• /
• 1993

CaO-TiO2 이성분계에서 40~50 mol% CaO 조성범위를 선택하여 CaTiO3과 CaTiO3-TiO2세라믹스의 마이크로파 유전특성을 조사하였다. CaTiO3 단일상 (50 mol% CaO조성)일 때 유전율(er) 178, 공진주파수 (fo)의 온도계수(r,)+1000ppm/C, 픔질계수인 Q값 2760(fo=2.7 GHz)으로 가장 큰 값을 나타내었다. CaTiO3와 TiO2상이 혼합상으로 있는 유전체에서는 CaO 함량이 감소함에 따라서 유전율과 공진주파수의 온도계수는 점차 감소하였으나 Q값과 밀도는 47 mol% CaO조성에서 가장 낮았다. 이것은 이상 혼합 세라믹에서 TiO2상의 감소로 인해 CaTiO3의 결정립 성장이 급속하게 일어남으로써 입계와 입내에 큰 기공이 존재하지 때문으로 생각된다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권1호
• /
• pp.21-25
• /
• 2004

From the gradual increasing state of charge (GISOC) observations, electrochemical behavior of multi-walled carbon nanotube│(lM LiP $F_{6}$ , EC,DEC,DME 3:5:5 volume ratio)│lithium cells was evaluated using the galvanostatic charge-discharge process. A MWCNT delivers a specific charge capacity of 1,300 mAh/g in a Li cell when cycled up to an end voltage of 0 V (vs. Li/L $i^{＋}$ )at a constant current rate every 10 hours. However, in the present study, the specific discharge capacity obtained is 338 mAh/g, thus amounting to a coulombic efficiency of only 26％. Further, when the MWCNT│Li cells were tested using the GISOC method, two distinguishable linear-fit ranges were observed due to the intercalation/deintercalation of lithium, which were found to have II $E_1$, IIC $s_1$ and II $E_2$of 27.3％, 372 mAh/g, and 25.5％, respectively. Q $c_1$, could be calculated from the data of IIE and IICs of each range by the modified equation "II $C_{sum}$= $\Sigma$( $Q_{C}$- $Q_{D}$)=(II $E_{1}$$^{-1}$ ) $Q_{Dl}$ ＋(II $E_2$$^{-1}$ -1) ( $Q_{D2}$- $Q_{Dl}$ ) ＋ IIC $s_1$= $Q_{Cl}$ - $Q_{Dl}$ ". Results of the GISOC method could be converted to the results of galvanostatic charge-discharge process, irrespective of the state of charge of the cell or battery.ery.y.y.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권4호
• /
• pp.407-413
• /
• 1997

The soft tissue injuries of Oral & Maxillofacial region include abrasion, contusion, simple laceration, laceration of skin with underlying tissue, soft tissue injuries combined with facial bone fracture and involving functional structures such as facial nerve and vessel, orbit, lacrimal duct and salivary gland and so on. The results obtained were as follows ; 1. The age range was 1 to 97, and the highest incidence occured in the 3rd decade(23.4%), followed by the 1st decade(20.2%), 4th decade(18.1%), 4th decade(18.1), and 5th decade(14.3%) 2. The sexual ration was 4 : 1(M : F). 3. The most common cause of facial laceration was a accident(54.5), followed by blow(17.8%), traffic accident(15.9%) and unknown(10.8%). 4. The most frequently occurred site of injury was a forehead(24), followed by oral cavity(16.9%), lip(15%), eyebrow(14.5%), cheek(14%), chin(11.8%), nose(2%), scalp(1.4%) and neck(0.9%). 5. Most of wound size was less than 3cm in length. 6. 28 patients suffered facial bone fracture, representing 7%. 7. The major complications following facial laceration were infection and facial paralysis caused by facial nerve injuries, representing 4.5% and 1.9%.

• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.257-264
• /
• 2017

Film of new Ti-15Zr-5Nb alloy formed during galvanic anodizing in orthophosphoric acid solution was characterized by optical microscope, scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and Raman micro-spectroscopy. Its anticorrosive properties were determined by electrochemical techniques. The film had a layer with nanotube-like porosity with diameters in 500-1000 nm range. The nano layer contained significant amounts of P and O as well as alloying element. Additionally, Raman micro-spectroscopy identified oxygen as oxygen ion in $TiO_2$ anatase and phosphorous as $P_2O_7{^{4-}}$ ion in phosphotitanate compound. All potentiodynamic polarization curves in artificial Carter-Brugirard saliva with pH values (pH= 3.96, 7.84, and 9.11) depending on the addition of 0.05M NaF revealed nobler behavior of anodized alloy and higher polarization resistance indicating the film is thicker and more compact nanolayer. Lower corrosion rates of the anodized alloy reduced toxicity due to less released ions into saliva. Bigger curvature radii in Nyquist plot and higher phase angle in Bode plot for the anodized alloy ascertain a thicker, more protective, insulating nanolayer existing on the anodized alloy. Additionally, ESI results indicate anodized film consists of an inner, compact, barrier, layer and an outer, less protective, porous layer.

• 한국융합학회논문지
• /
• 제9권1호
• /
• pp.59-65
• /
• 2018

본 연구는 융복합연구로서 대학생들의 친밀한 관계의 두려움이라는 사회 심리학적인 역기능과 관련하여, 신체적 건강의 측면인 구강건강과 개인내적 심리적 측면인 자기 효능감의 영향력에 대해 살펴보고자 하였다. 대학생 시기의 과업인 친밀한 관계 맺음의 어려움을 효과적으로 해결하고 개입하기 위하여 주관적 구강건강상태, 자기 효능감을 관련변수로 구성된 설문을 실시하였다. 총 557명의 대학생의 자기 기입식 설문자료를 빈도분석과 t-test, F 검증, 다중회귀분석을 통해 분석하였고, 그 결과 친밀한 관계의 두려움에 가장 큰 영향을 미치는 변인은 자기 효능감으로 나타났고, 다음이 주관적 구강건강상태의 인식, 과거의 데이트 경험 순으로 나타났다. 심리내적인 자기효능감과 구강건강에 대한 향상을 위한 교육과 상담 프로그램 개발과 구축을 위한 노력이 대학생들의 친밀한 관계의 두려움을 감소시키기 위한 방법으로 제안이 될 수 있을 것이다.

• Journal of Forest and Environmental Science
• /
• 제31권3호
• /
• pp.214-224
• /
• 2015

The economy of India and so also of many Asian countries depends on bamboos and their uses are not only in domestic items but also in rural housing and raw materials to several industries and germplasm characterization is an important link between the conservation and utilization of plant genetic resources. Classical taxonomic studies of the bamboos are based on floral morphology and growth habit, which can cause problems in identification due to erratic flowering coupled with different biotic agencies and environmental factors. Identification and genetic relationships among accessions of Thamnocalamus falconeri were investigated using morphology and random amplified polymorphic DNAs (RAPD) technique. Analysis started by using 51 vegetative characters and forty two 10-mer primers that allowed us to distinguish different genotypes hailing from different eco- zones of Garhwal Himalayas (India). The selected primers (12) were used for identification and for establishing a profiling system to estimate genetic diversity. A total of 79.33% polymorphism was estimated by using 12 selected primers. The genetic similar analysis was conducted based on binary digits i.e. presence (1) or absence (0) of bands, which revealed a wide range of variability among the species whereas genetic relatedness was quite high based on vegetative characters. Cluster analysis clearly showed two major clusters for both of the markers viz. morphology and RAPD belonging to 10 accessions of T. falconeri. Two major clusters were further divided into minor clusters. Cluster based on RAPD marker showed grouping of accessions of closed locality whereas analogy was reported for vegetative traits. The RAPD technique has the potential for use in species identification and genetic relationships studies of bamboo for breeding program.

• 대한화학회지
• /
• 제28권4호
• /
• pp.231-237
• /
• 1984

$YO_{1.5+x}$와 $HoO_{1.5+x}$로 표시되는 산화이트륨과 산화홀뮴의 비화학양론적 조성식의 x-값을 700$^{\circ}$C에서 1000$^{\circ}$C까지의 온도영역과 대기압에서 $1{\times}10^{-6}$기압 산소압력까지의 구간에서 중량 분석법에 의하여 측정하였다. 측정된 x-값은 온도가 상승하면 증가하고 산소압력이 증가하면 또한 증가하였다. 비화학양론적 조성의 생성엔탈피 $({\Delta}H_f)$는 산소압력이 감소하면 감소하였고 그 값이 양의 값을 갖는 것으로 과잉산소의 형성 과정이 흡열과정임을 알 수 있다. 산소압력 의존성 1/n-값은 온도가 상승하면 상승하고 양의 값을 갖는 것으로 높은 온도일수록 산소압력 의존성이 커짐을 보여 주었다. 그리고 x-값과 열역학적 자료로 부터 비화학양론적 결합과 전도성메카니즘을 규명하였다.

• 설비공학논문집
• /
• 제16권4호
• /
• pp.355-367
• /
• 2004

The heat transfer and friction characteristics of the heat exchangers having sinusoidal wave fins were experimentally investigated. Twenty-nine samples having different waffle heights (1.5 mm and 2.0 m), fin pitches (1.3mm to 1.7mm) and tube rows (one to three) were tested. Focus was given to the effect of the waffle configuration (herringbone or sinusoidal) on the heat transfer and friction characteristics. Results show that the sinusoidal wave geometry provides higher heat transfer coefficients and friction factors than the herringbone wave geometry, and the difference increases as the number of row increases. The i/f ratios of the herringbone wave geometry, however, are larger than those of the sinusoidal wave geometry. Compared to the herringbone wave geometry, the sinusoidal wave geometry yielded a weak row effect, which suggests a superior heat transfer performance at the fully developed flow region. Possible explanation is provided considering the flow characteristics in wavy channels. Within the present geometric range, the effect of the waffle height on the heat transfer coefficient was not prominent. The effect of the fin pitch was also negligible. Existing correlations highly overpredicted both the heat transfer coefficients and friction factors. A new correlation was developed using the present data.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.45-52
• /
• 2017

PURPOSES : The main purpose of this study is to develop a high elastic modulus and low-shrinkage roller-compacted concrete base (RCCB) in order to prevent fatigue cracking and reflective cracking in the asphalt surface layer of composite pavement. Using a rigid base material with low shrinkage can be a solution to this problem. Moreover, a strong rigid base with high elastic modulus is able to shift the location of critical tensile strain from the bottom of the asphalt layer to the bottom of the rigid base layer, which can prevent fatigue cracking in the asphalt layer. METHODS : Sensitivity analysis of composite pavement via numerical methods is implemented to determine an appropriate range of elastic modulus of the rigid base that would eliminate fatigue cracking. Various asphalt thicknesses and elastic moduli of the rigid base are used in the analysis to study their respective influences on fatigue cracking. Low-shrinkage RCC mixture, as determined via laboratory testing with various amounts of a CSA expansion agent (0%, 7%, and 10%), is found to achieve an appropriate low-shrinkage level. Shrinkage of RCC is measured according to KS F 2424. RESULTS : This study shows that composite pavements comprising asphalt thicknesses of (h1) 2 in. with E2 > 19 GPa, 4 in. with E2 > 15 GPa, and 6 in. with E2 > 11 GPa are able to eliminate tensile strain in the asphalt layer, which is the cause of fatigue cracking in this layer. Shrinkage test results demonstrate that a 10% CSA RCC mixture can reduce shrinkage by 84% and 93% as compared to conventional RCC and PCC, respectively. CONCLUSIONS : According to the results of numerical analyses using various design inputs, composite pavements are shown to be able to eliminate fatigue cracking in composite pavement. Additionally, an RCC mixture with 10% CSA admixture is able to reduce or eliminate reflective cracking in asphalt surfaces as a result of the significant shrinkage reduction in the RCC base. Thus, this low-shrinkage base material can be used as an alternative solution to distresses in composite pavement.