• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.539-547
• /
• 1985

본 논문에서는 이상과 같은 연구현상을 배경으로 응력비 R.geq.0인 사인응력파 에서도 사이클의존형 크랙전파가 공존하는가, 공존한다면 그 전이를 결정짓는 조건을 구하기 위해, 대표적인 고온용 재료인 SUS 304강을 이용하여 온도 650.deg. C, 대기중에서 반복속도 .nu., 응력비 R, 응력레벨 .sigma.$_{maxo}$등의 실험조건을 바꾸어 고온저사이클 피로실험을 하였다. 또 이 현상의 기초과정을 이해하는데 도움을 주기 위하여 파면 관찰을 행하였다.

• Journal of Chest Surgery
• /
• 제22권2호
• /
• pp.179-190
• /
• 1989

The experimental study for extracorporeal preservation of the heart-lung preparation by autoperfusion system was performed in 10 dogs. Under intravenous Pentothal endotracheal anesthesia bilateral thoracotomies were performed. A 24F cannula connected to a plastic reservoir bag located 100 cm above the level of the heart was introduced into the aortic arch. Left subclavian, innominate artery, and descending aorta were ligated and divided. Both vena cavae were ligated and divided after the bag was half filled with blood. A 24F catheter inserted into right atrium and connected to the plastic bag in order to keep constant the preload. The thoracic trachea was intubated and the lungs were ventilated. The heart-lung preparations were removed en bloc and floated in a $34^{\circ}C$ bath of Hartmann solution. The preparations were observed for from 2 hours to 8 hours, with the average of 5.2 hours. Hemodynamic and hematologic variables were measured during preharvest and autoperfusion. The pH revealed severe respiratory alkalosis due to very low $PaCO_2$ during autoperfusion ; $PaO_2$ remained constant for 130-140 mmHg; $A-aDO_2$ increased markedly. The static inspiratory pressure [SIP] at late autoperfusion [6hr] increased significantly as compared with at early autoperfusion [2hr]. There was no difference between white blood cell counts from right atrium and those of left atrium. Heart rates remained constant for 110-120/min; cardiac outputs maintained to approximately 0.6L/min; mean aortic pressures, 75 mmHg; mean pulmonary arterial pressures, 15-18 mmHg; mean right atrial pressures, 9-13 mmHg; mean left atrial pressures, 12 mmHg lower than those of right atrium. Serum Na maintained with normal range during autoperfusion; K increased significantly; Ca decreased progressively. Hemoglobin and hematocrit decreased significantly during autoperfusion. The study demonstrated that stable hemodynamics could be maintained throughout the experiment and the preparation of the lung seemed to be inadequate, especially after 3-4 hours, such as high $A-aDO_2$, increased SIP, and scattered atelectasis and edema in their gross appearances.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.107-113
• /
• 2006

These studies were carried out to investigate the quality of green tea processed by different pan-firing hand rolling and to select the best conditions during the procedure of green tea processing the results were as follows. At harvestion tea plant leaf, tea plants had 4 leaves. each leaf size was 7.5 cm'$\square$2.6 cm, and weight of 100 buds 46.6 g. The increase of pan-fired time decreased in the moisture content and yield of green tea. After processing green tea, 5 times pan-fired one had much more contents of total nitrogen (T-N:5.31%), caffeine (2.00%) and total amino acid (T.A.A. : 3,046 mg%) and less content of tannin (13.41%) than the other treatments. but 3 times pan-fired one had the highest contents of vitamin C (204.3 mg%) and chlorophyll (365.0 mg%) among three kinds pan-firing method. Sixteen kinds of free amino acid including theanine as a good taste component of pan-fired green tea were isolated and measured by HPLC. Free amino acid (FAA) contents were in the range of $2,683{\sim}2,925$ mg% and among various pan-firing methods, 5 tims pan-fired one had the highest content of F.A.A. Among these free amino acids, theanine occupied as much as $56.4{\sim}61.3%$ of F.A.A. Lightness, yellowness and redness of 5 times pan-fired green tea were middle value among three different treatments. Besides, it gained the highest score of sensory evaluation among them. These above results suggested that 5 times pan-fired green tea was considered to be the best level as pan-firing times of green tea processing.

• 수산해양기술연구
• /
• 제32권3호
• /
• pp.249-256
• /
• 1996

The saury stick - held dip net fishery of Korea in the Northwest Pacific Ocean began in 1985 with 3 vessels. Since then the fishery has grown so rapidly year by year that the number of vessels increased to 34 and the catch to 40 thousands Mff in 1993. In the present study, the monthly situation and the movement of the fishing ground for the pacific saury in the Northwest Pacific were investigated and the monthly optimum fIshing tempertures were estimated, from the relationship between the catch and the sea surface temperature. In the beginning of the fishing season, June to August, the fIshing ground is formed in the very wide range, mainly in the northward area of the front meandering, as the parcific saury migrate northward. In the main season, September to November, the ground is formed in the southward area of the front, off the east coast of Japan. Andd then, the fishing season ends in December with the ground coming near to the east coast of Japan. The monthly optimum fishing tempertures showed 11~$13^{\circ}C.$ in June to July, 13-$17^{\circ}C.$ in August to November, and 15~ $17^{\circ}C.$ in December in general. The profIles of water temperature were much different in accordance by net casting position in the fishing ground, regardless of season. So, the MLD and CPUE was analyzed to find out the relation between the water temperature and the catch. Then, it is found that the CPUE shows over 0.7Mtr/haul as the MLD 40~70m.40~70m.

• 천문학회보
• /
• 제41권1호
• /
• pp.36.2-37
• /
• 2016

We study the long-term radio variability of 43 radio bright AGNs by exploiting the data base of the University of Michigan Radio Astronomy Observatory (UMRAO) monitoring program. The UMRAO database provides high quality lightcurves spanning 25 - 32 years in time at three observing frequencies, 4.8, 8, and 14.5 GHz. We model the periodograms (temporal power spectra) of the observed lightcurves as simple power-law noise (red noise, spectral power $P(f){\propto}f^{-{\beta}}$ using Monte Carlo simulations, taking into account windowing effects (red-noise leak, aliasing). The power spectra of 39 (out of 43) sources are in good agreement with the models, yielding a range in power spectral index (${\beta}$) from ${\approx}1$ to ${\approx}3$. We find a strong anti-correlation between ${\beta}$ and the fractal dimension of the lightcurves, which provides an independent check of the quality of our modelling of power spectra. We fit a Gaussian function to each flare in a given lightcurve to obtain the flare duration. We discover a correlation between ${\beta}$ and the median duration of the flares. We use the derivative of a lightcurve to obtain a characteristic variability timescale which does not depend on the assumed functional form of the flares, incomplete fitting, and so on. We find that, once the effects of relativistic Doppler boosting on the observed timescales are corrected, the variability timescales of our sources are proportional to the black hole mass to the power of ${\alpha}=1.70{\pm}0.49$. We see an indication for AGNs in different regimes of accretion rate, flat spectrum radio quasars and BL Lac objects, having different scaling relations with ${\alpha}{\approx}1$ and ${\approx}2$, respectively. We find that modelling the periodograms of four of our sources requires the assumption of broken powerlaw spectra. From simulating lightcurves as superpositions of exponential flares we conclude that strong overlap of flares leads to featureless simple power-law periodograms of AGNs at radio wavelengths in most cases (The paper is about to be submitted to ApJ).

• 대한조선학회지
• /
• 제12권2호
• /
• pp.59-66
• /
• 1975

Recently, as the dimensions of energy carriers increase, especially in draft, a reliable prediction of the ship motions at finite depths of water becomes necessary. The purpose of this paper is to probe the effect of finite water depth on the hydrodynamic forces and ship motions, particularly heave and pitch, in longitudinal regular head waves, by comparing the experimental value of Freakes and Keay with the author's theoretical value obtained by applying the modified strip theory to the Mariner class ship. It is confirmed that generally the hydrodynamic coefficients in the equations of motion increase with decreasing water depth, and the wave exciting forces and moments decrease with decreasing water depth. Amplitudes of heave and pitch in longitudinal regular head waves decrease as the water depth in the range where the length of the incident wave is comparatively long. The effects of Froude Number on the hydrodynamic coefficients increase with decreasing water depth and is more noticeable in the case of heave than pitch. In heave, generally the discrepancy between the experimental value and the theoretical value is relatively small in the case of $F_n=O$, but it is very large in the case of $F_n=0.2$. It is considered that the trend stems from the ignorance of the three dimensional effect and the other effects due to shallowness of water on the hydrodynamic coefficients in the theoretical calculation. An extension of methods for calculating the two dimensional hydrodynamic forces to included the effect of forward speed should be recommended. It is required that more experimental works in finite water depths will be carried out for correlation studies between the theoretical calculation, according tp modified strip theory, and model experiments.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.371-379
• /
• 2005

활성탄 흡착제(Calgon co.)에 대하여 수소, 메탄 그리고 에틸렌의 단일성분 흡착평형과 이들의 혼합가스의 흡착평형을 정적부피법으로 293.15 K, 303.15 K 그리고 313.15 K의 온도와 18 atm의 압력 이하에서 측정하였다. 순수 기체의 흡착등온선을 이용하여 혼합성분의 흡착평형을 예측하였고 실험데이터와 비교하였다. 사용한 모델식은 확대 Langmuir 모델, 확대 Langmuir-Freundlich 모델, 이상 흡착 용액 이론 그리고 빈자리 용액 모델이다. 모델식들은 비교적 정확한 예측치를 보였으며, 이 중 확대 L-F 모델이 혼합 기체의 흡착평형을 다른 모델식보다 좋은 예측결과를 보여줬다.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.377-385
• /
• 2002

Metal-Ferroelectric-Insulator-Semiconductor(MFIS) 구조의 적용하기 위해 R. F. 마그네트론 스퍼터를 이용하여 p-type Si(111) 기판 위에 $ZrO_2$와 $SrBi_2Ta_2O_9$ 박막을 증착하였다. SBT 박막은 $ZrO_2$ 완충층을 삽입함으로써 MFIS 구조의 전기적인 특성이 향상되었다. $ZrO_2$ 박막의 두께를 고정하고 SBT 박막의 두께를 160nm에서 220nm으로 변화시키면서 윈도우 메모리를 3-9V의 범위에서 측정하였다. Pt/SBT(160nm)/$ZrO_2$(20nm)/Si의 조건에서 최대 2.2V 메모리 윈도우 값을 얻을 수 있었으며 이 메모리 윈도우 값은 실제 적용되는 저전압 NDRO-FRAM 구동에 충분한 값이다.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.98-104
• /
• 2005

This study experimentally and theoretically examines the fire characteristics of 100- by 100- by 50-mm samples of flame retardant treated Douglas fir. Samples were exposed to a range of incident heat fluxes 10 to $50kW/m^2$. The time to ignition measurements obtained from the cone heater were used to derive characteristic properties of the materials. A one-dimensional integral model has been used to predict the, time to ignition, critical heat flux and ignition temperature of samples. Ignition data and best-fit curves confirm ${{\dot{q}}_i}^{'}{\rightarrow}{{\dot{q}}_{cr}^{'}\;then\;t_{ig}{\rightarrow}{\infty}$ and when ${{\dot{q}}_i}^'{\gg}{{\dot{q}}_{cr}^'\;then\;t_{ig}{\rightarrow}0$. And Ignition of flame retardant treated samples occurred not at incident heat flux of bellow $10kW/m^2.$. By a one-dimensional integral model, the critical heat flux of each samples was predicted $10.21kW/m^2,\;11.82kW/m^2,\;and\;14.16kW/m^2$ for the D-N, D-F2, and D-F4, respectively. In ignition temperature of each samples, flame retardant treated samples were measured high about $50^{\circ}C$ than non-treated samples. Water-soluble flame retardant used in this study finds out more effect in delay of time to ignition when incident heat flux is low than high.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.88-97
• /
• 1998

The surface characteristics of 13Cr stainless steel systems by plasma nitriding were investigated. The plasma nitriding for the 13Cr steels, in which the nitriding forming elements such as Ti, V, W, Nb, Al, Zr and Si were added about 2~3wt.%, respectively, was performed. In all nitrided specimens, .epsilon.-F $e_{2-3}$N, UPSILON.'-F $e_{4}$N and CrN were detected as the nitrides with the a-Fe in the nitrided layer. VN and .betha.- $W_{2}$N were also detected in 13Cr-3V and 13Cr-3W alloys. The growth of the nitrided layer was controlled by the diffusion process. The thickness of the nitrided layer was similar in the 13Cr-2Nb and 3Zr specimens to that of 13Cr(BM) specimen, while the others exhibited the thinner layer. The activation energy for the growth of the nitrided layer in the temperature range of 773-873K was about 130kJ/mol in 13Cr(BM), 13Cr-2Ti, 3W, 3Al, 3Zr and 3Si alloys. The hardness of the nitrided specimens was significantly increased above Hv1000, comparing to the non-nitrided specimen. The specimens with the nitrided forming elements revealed much higher hardness values and, especially, 13Cr-3Al, 3V and 3Si specimens were significantly hardened up to Hv1300.v1300.0.