• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.16 no.2
• /
• pp.232-241
• /
• 2009

Purpose: The purpose of this study was to analyze the importance, difficulty, and frequency of work (duties and tasks) done by nurses' in Outpatient Departments (OPD). Method: Data were collected using structured questionnaires, which included 11 duties and 92 tasks making up the OPD nurse's job. Questionnaires were completed by 286 nurses. Each duty and task was analyzed for importance, difficulty, and frequency (range 1-3). Results: The mean score for importance was $2.58{\pm}0.29$, for difficulty, $2.11{\pm}0.31$, and for frequency, $2.18{\pm}0.31$. OPD nurses recognized 'patient education and consultation' as important and difficult. However, in practice OPD nurses reported the most frequent task as 'support for medical services'. There was a significant difference in importance and difficulty of duties according to OPD nurses' university degree (F=3.693, p=.026; F=4.089, p=.018) and hospital size (F=4.274, p=.006; F=3.154, p=.025). However there were no differences in importance, difficulty, or frequency according to clinical experience in OPD. Conclusion: The findings indicate that OPD nurses must be able to do important and difficult duties and tasks, especially patient education and consultation. To have time for these uniquely nursing tasks, OPD nurses need to delegate 'preparation for medical service', and 'management of facility and environment' to nonmedical health-care workers.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.1
• /
• pp.25-32
• /
• 2005

The purpose of this study was to examine an effect of fluoride recharging on fluoride release and surface change of fluoride-releasing restorative materials. Six commercially available fluoride releasing restorative materials (Fuji II LC Improved: FL, Compoglass F: CF, Dyract AP: DA, F2000: FT, Gradia Direct: GD, and Tetric Ceram: TC) were selected as experimental materials. Disk specimens were fabricated with split teflon mold to the final dimensions of 15 mm in diameter and 1 mm in thickness. Ten samples of each material were fabricated and stored in deionized water at $37^{\circ}C{\pm}1^{\circ}C$ for 3 months. Before fluoride recharging, all specimens were polished sequentially from #800 to #2000 emery papers. Fluoride recharging was done at 5-day interval using 2.0% NaF gel. The release of fluoride into the storage water was monitored using a fluoride ion electrode. Data were analyzed by one-way ANOVA and Tukey's multiple range test. The results obtained were summarized as follows; 1. Fluoride recharge capability were FL > CF > DA and TC group after 12 times exposure to 2.0% NaF gel (P<0.05). 2. All the experimental materials, except for FT group, showed the increase of fluoride release and surface roughness. 3. Fluoride-releasing rates returned to base line within 3 days.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.5
• /
• pp.668-676
• /
• 2003

The effect of nozzle height on heat transfer of a hot steel plate cooled by an impinging liquid jet is not well understood. Previous studies have been based on the dimensionless parameter z/d. To test the validity of this dimensionless parameter and to investigate gravitational effects on the jet, stagnation velocity of an impinging liquid jet were measured and the cooling experiments of a hot steel plate were conducted for z/d from 6.7 to 75, and an inverse heat conduction method is applied for the quantitative comparison. Also, the critical instability point of a liquid jet was examined over a range of flow rates. The experimental velocity data for the liquid jet were well correlated with the dimensionless number 1/F $r_{z}$$^2$based on distance. It was thought that the z/d parameter was not valid for heat transfer to an impinging liquid jet under gravitational forces. In the cooling experiments, heat transfer was independent of z when 1/F $r_{z}$$^2$< 0.187(z/d = 6.7). However, it was found that the heat transfer quantity for 1/F $r_{z}$$^2$=0.523(z/d = 70) is larger 11% than that in the region for 1/F $r_{z}$$^2$=0.187. The discrepancy between these results and previous research is likely due to the instability of liquid jet.uid jet.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2136-2149
• /
• 1992

The natural convection from an inclined ice flat plate immersed in cold water near its density maximum is studied numerically. Finite difference analysis has been performed for the heat and momentum transfer with respect to various inclined angles and ambient water temperatures. The results of the analysis are presented for ambient water temperatures, 1.0deg. C. leq. T／sub .inf.／.leq. 15.0deg. C and the inclined anales from 0deg to 60deg. They include velocity profiles, temperature profiles, melting velocities, and mean Nusselt numbers for entire flow fields, Generally, in the range of 0deg. C .leq.theta. .leq. 60.deg. C, the results show three distinct flow regimes, In the range of 1.0 deg. C .leq. T／sub .inf.／ .leq. 4.6 .deg. C, the greatest mean Nuselt number exists about 3.0deg. C. In the range of 5.7deg. C .leq. T／sub .inf.／ .leq. 15.0deg. C, mean Nuselt number increases as ambient water temperature increases. Also, the mean Nuselt number decreases as the inclined angle increases. This theoretical results are compared with previous experimental ones and multiple steady state ones.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1201-1206
• /
• 2008

The effects of free-range farming, compared to a conventional production system, on carcass and meat qualities were studied using black-feathered Taiwan native chickens. Twenty 16-week old females were purchased separately from a free-range farm and a conventional production farm and used for this study. The results showed similarities in the live weight (roughly 2.1 kg), dressing percentage (69%) and meat percentage (19%) of deboned leg quarter. Significant differences (p<0.05) found for the free-range chickens included: a higher percentage of meat for the breast, an increased crude protein content and chewiness value for the breast, but decreased crude fat content and lower hardness and fracturablility values for the leg quarter. Significantly higher L* values were found for the breast and leg meat of conventionally produced chickens, whereas no significant differences were found for WHC and purge loss between the breast and the leg, and between the two production systems as well. Results of sensory evaluation showed a significant preference for leg over breast meat (p<0.05). The scores of all the attributes including aroma, flavor, firmness, tenderness, juiciness and overall acceptability of leg meat from free-range chickens were slightly higher than for conventional chickens, while the reverse was true for breast meat, though no significant difference could be found. Free-range Taiwan native chicken appeared to yield the best of the results, with flavorful yet tender leg meat for higher sensory satisfaction, and high-protein but low-fat breast meat for healthier diet choice.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.1
• /
• pp.23-27
• /
• 1995

A selection experiment with Romney Marsh sheep was used to evaluate direct responses to selection. Two flocks were maintained; a) the selection line formed in 1979 by the Romney Group Breeders to select for high prolificacy, defined as the number of live lambs born per ewe joined per year and b) a control line, established in 1982, where flock replacements were chosen at random. Predicted responses per year of birth female group and per year respectively were 0.033 and 0.027 live lambs. The rate of predicted response per year was within the theoretical expected range from 0.01 to 0.03 of the mean. The rates of realized response in prolificacy per year of birth female group and per year respectively were 0.026 and 0.021. These estimates of realized responses represented between 0.01 and 0.02 of the control line mean per year.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.730-735
• /
• 2014

In this study, the temperature characteristics of electrostatic capacity and dielectric loss for the sample of Teflon film which is degradated at the $120^{\circ}C{\sim}200^{\circ}C$ temperature range in the oven for 10 hours has been measured in through the applied frequency range of 0.1 kHz~4,800 kHz at temperature of $50^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $170^{\circ}C$. Also, in the same conditions, the frequency characteristics of electrostatic capacity and dielectric loss for the sample of Teflon film has been measured in through the applied temperature range of $30^{\circ}C{\sim}70^{\circ}C$ on setting frequency of 0.1 kHz, 1 kHz, 10 kHz, 100 kHz. The results of this study are as follows. When the frequency range of 0.1 kHz~4,800 kHz applied to the sample of Teflon film, the electrostatic capacity has been measured at the temperature of $50^{\circ}C$, $90^{\circ}C$, $130^{\circ}C$, $170^{\circ}C$. Through this measurement, it found that the electrostatic capacity decreased with increasing temperature. Regarding this result, may be it is because the electromagnetic coupling is degraded by thermal degradation. When the sample of Teflon film heated at $280^{\circ}C$ for 10 hours in oven, the dielectric loss has changed from unstable status to stabilizing status with increasing the degradation temperature in the $120^{\circ}C$, $160^{\circ}C$, $200^{\circ}C$ range. In this measurement, the two spectrums of dielectric loss appeared. It considers that this spectrum of dielectric loss appeared in 300 Hz is caused by the molecular motion of the C-F or OH group. Through this study, It found that the electrostatic capacity decreased with increasing frequency and temperature, and there is no change in dielectric loss, although the frequency increases.

• Journal of Mushroom
• /
• v.2 no.2
• /
• pp.88-96
• /
• 2004

This study was executed to decide the physiological characteristics of Ferule mushroom. Four strains of Ferule mushroom were tested to select a superior strain in its mycelial growth. The pertinent substrates, temperature and pH ranges for the growth of selected strain were determined. And then, the wood rotting ability and type of the Ferule mushroom were determined. The superior strain F-2 among four strains was selected, on the basis of its vegetative mycelial growth and density on agar media. Mycelial growth of F-2 was the best on MYPA among other tested synthetic or semi-synthetic media. The temperature range for pertinent mycelial growth was about $25{\sim}34^{\circ}C$ and best at $30^{\circ}C$. The optimum pH range on MYPA was 5.0~6.0. The mycelial growth was mostly stimulated by soluble starch at cont. 1% (w/w) and secondly, maltose among several carabon sources and by mixed solution of YE(0.25%) and ME(0.25%) but not by ME alone. Cell thining and erosion of Pinus rigida wood by the mycelia of Ferule mushroom were found only on a few cell but largely at wood block test, indicating that the softwood rotting ability of Ferule mushroom mycelia was not so good. The result of polarized light microscopy appeared that cellulose of some tracheides showing the S3 layer lost brifringence was degraded by Ferule mushroom. But only part of cellulose of P. rigida wood was degraded by Ferule mushroom, because most of wood cells continued to showing briefingence. A largely degraded ray parenchyma and longitudinal parenchyma cell and partly thinning and erosion of hardwood(Quercus serrata) cell was found and it indicates that the rotting ability of Ferule mushroom mycelia on hardwood was higher than on softwood. It could be concluded that the difference in the wood rot by Ferule mushroom between the hardwood and softwood was made by the difference of chemical constitutions between them, especially in the contents and the types of lignin. Ferule mushroom was considered as white rotter as a result of bavendam test, although more research should be required.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.599-602
• /
• 2005

In this paper, we have performed a study that modifies the CPW Pad configurations to improve an $f_{max}$ characteristic of metamorphic HEMT. To analyze the CPW Pad structures of MHEMT, we use the ADS momentum simulator developed by $Agilent^{TM}$. Comparing the employed structure (G/W = 40/100 m), the optimized structure (G/W = 20/25 m) of CPW MHEMT shows the increased $S_{21}$ by 2.5 dB, which is one of the dominant parameters influencing the $f_{max}$ of MHEMT. To compare the performances of optimized MHEMT with the employed MHEMT, DC and RF characteristics of the fabricated MHEMT were measured. In the case of optimized CPW MHEMT, the measured saturated drain current density and transconductance $(g_m)$ were 693 mA/mm and 647 mS/mm, respectively. RF measurements were performed in a frequency range of $0.1{\sim}110$ GHz. A high $S_{21}$ gain of 5.5 dB is shown at a millimeter-wave frequency of 110 GHz. Two kinds of RF gains, $h_{21}$ and maximum available gain (MAG), versus the frequency, and a cut-off frequency ($f_t$) of ${\sim}154$ GHz and a maximum frequency of oscillation ($f_{max}$) of ${\sim}358$ GHz are obtained, respectively, from the extrapolation of the RF gains for a device biased at a peak transconductance. An optimized CPW MHEMT structure is one of the first reports among fabricated 0.1 m gate length MHEMTs.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.46-51
• /
• 2005

We have developed control electronics to operate flux-locked loop (FLL), and analog signal filters to process FLL outputs for 64-channel Double Relaxation Oscillation SQUID (DROS) magnetocardiography (MCG) system. Control electronics consisting of a preamplifier, an integrator, and a feedback, is compact and low-cost due to larger swing voltage and flux-to-voltage transfer coefficients of DROS than those of dc SQUIDs. Analog signal filter (ASF) serially chained with a high-pass filter having a cut-off frequency of 0.1 Hz, an amplifier having a gain of 100, a low-pass filter of 100 Hz, and a notch filter of 60 Hz makes FLL output suitable for MCG. The noise of a preamplifier in FLL control electronics is $7\;nV/{\surd}\;Hz$ at 1 Hz, $1.5\;nV/{\surd}\;Hz$ at 100 Hz that contributes $6\;fT/{\surd}\;Hz$ at 1 Hz, $1.3\;fT/{\surd}\;Hz$ at 100 Hz in readout electronics, and the noise of ASF electronics is $150\;{\mu}V/{\surd}\;Hz$ equivalent to $0.13\;fT/{\surd}\;Hz$ within the range of $1{\sim}100\;Hz$. When DROSs are connected to readout electronics inside a magnetically shielded room, the noise of 64-channel DROS system is $10\;fT/{\surd}\;Hz$ at 1 Hz, $5\;fT/{\surd}\;Hz$ at 100 Hz on the average, low enough to measure human MCG.