• Journal of Astronomy and Space Sciences
• /
• v.29 no.3
• /
• pp.321-328
• /
• 2012

We have designed a 30 cm cryogenic space infrared telescope for astronomical observation. The telescope is designed to observe in the wavelength range of 0.5~2.1 ${\mu}m$, when it is cooled down to 77 K. The result of the preliminary design of the support structure and support method of the mirror of a 30 cm cryogenic space infrared telescope is shown in this paper. As a Cassegrain prescription, the optical system of a 30 cm cryogenic space infrared telescope has a focal ratio of f/3.1 with a 300 mm primary mirror (M-1) and 113 mm secondary mirror (M-2). The material of the whole structure including mirrors is aluminum alloy (Al6061-T6). Flexures that can withstand random vibration were designed, and it was validated through opto-mechanical analysis that both primary and secondary mirrors, which are assembled in the support structure, meet the requirement of root mean square wavefront error < ${\lambda}/8$ for all gravity direction. Additionally, when the M-1 and flexures are assembled by bolts, the effect of thermal stress occurring from a stainless steel bolt when cooled and bolt torque on the M-1 was analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1102-1107
• /
• 1993

Microwave dielectric properties of CaTiO3 and CaTiO3-TiO2 ceramics for the composition range between 40 and 50 mol% CaO in CaO-TiO2 binary system were investigated. CaTiO3 ceramics with50 mol% CaO showed the dielectric constant (e,) of 178, the temperature coefficient of resonant frequency(c,) of+1000 ppm/'c and the qualify factor Q of 2760 (f0=2.7 GHz ). Dielectric constant and temperature coefficient of resonant frequency of ceramics with dual phases of CaTiO3 and TiO2 decreased gradually from those of CaTiO3 as the CaO content decreased. Q value and density were found to have minimum at the composition of 47 mol% CaO. The degradation of Q value and density in dual phase ceramics seems to be caused by the large pores at grain boundaries and/or within grains remained after rapid growth of CaTiO3 grains as TiO2 Phase decreased.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.1
• /
• pp.21-25
• /
• 2004

From the gradual increasing state of charge (GISOC) observations, electrochemical behavior of multi-walled carbon nanotube│(lM LiP $F_{6}$ , EC,DEC,DME 3:5:5 volume ratio)│lithium cells was evaluated using the galvanostatic charge-discharge process. A MWCNT delivers a specific charge capacity of 1,300 mAh/g in a Li cell when cycled up to an end voltage of 0 V (vs. Li/L $i^{＋}$ )at a constant current rate every 10 hours. However, in the present study, the specific discharge capacity obtained is 338 mAh/g, thus amounting to a coulombic efficiency of only 26％. Further, when the MWCNT│Li cells were tested using the GISOC method, two distinguishable linear-fit ranges were observed due to the intercalation/deintercalation of lithium, which were found to have II $E_1$, IIC $s_1$ and II $E_2$of 27.3％, 372 mAh/g, and 25.5％, respectively. Q $c_1$, could be calculated from the data of IIE and IICs of each range by the modified equation "II $C_{sum}$= $\Sigma$( $Q_{C}$- $Q_{D}$)=(II $E_{1}$$^{-1}$ ) $Q_{Dl}$ ＋(II $E_2$$^{-1}$ -1) ( $Q_{D2}$- $Q_{Dl}$ ) ＋ IIC $s_1$= $Q_{Cl}$ - $Q_{Dl}$ ". Results of the GISOC method could be converted to the results of galvanostatic charge-discharge process, irrespective of the state of charge of the cell or battery.ery.y.y.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.4
• /
• pp.407-413
• /
• 1997

The soft tissue injuries of Oral & Maxillofacial region include abrasion, contusion, simple laceration, laceration of skin with underlying tissue, soft tissue injuries combined with facial bone fracture and involving functional structures such as facial nerve and vessel, orbit, lacrimal duct and salivary gland and so on. The results obtained were as follows ; 1. The age range was 1 to 97, and the highest incidence occured in the 3rd decade(23.4%), followed by the 1st decade(20.2%), 4th decade(18.1%), 4th decade(18.1), and 5th decade(14.3%) 2. The sexual ration was 4 : 1(M : F). 3. The most common cause of facial laceration was a accident(54.5), followed by blow(17.8%), traffic accident(15.9%) and unknown(10.8%). 4. The most frequently occurred site of injury was a forehead(24), followed by oral cavity(16.9%), lip(15%), eyebrow(14.5%), cheek(14%), chin(11.8%), nose(2%), scalp(1.4%) and neck(0.9%). 5. Most of wound size was less than 3cm in length. 6. 28 patients suffered facial bone fracture, representing 7%. 7. The major complications following facial laceration were infection and facial paralysis caused by facial nerve injuries, representing 4.5% and 1.9%.

• Corrosion Science and Technology
• /
• v.16 no.5
• /
• pp.257-264
• /
• 2017

Film of new Ti-15Zr-5Nb alloy formed during galvanic anodizing in orthophosphoric acid solution was characterized by optical microscope, scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and Raman micro-spectroscopy. Its anticorrosive properties were determined by electrochemical techniques. The film had a layer with nanotube-like porosity with diameters in 500-1000 nm range. The nano layer contained significant amounts of P and O as well as alloying element. Additionally, Raman micro-spectroscopy identified oxygen as oxygen ion in $TiO_2$ anatase and phosphorous as $P_2O_7{^{4-}}$ ion in phosphotitanate compound. All potentiodynamic polarization curves in artificial Carter-Brugirard saliva with pH values (pH= 3.96, 7.84, and 9.11) depending on the addition of 0.05M NaF revealed nobler behavior of anodized alloy and higher polarization resistance indicating the film is thicker and more compact nanolayer. Lower corrosion rates of the anodized alloy reduced toxicity due to less released ions into saliva. Bigger curvature radii in Nyquist plot and higher phase angle in Bode plot for the anodized alloy ascertain a thicker, more protective, insulating nanolayer existing on the anodized alloy. Additionally, ESI results indicate anodized film consists of an inner, compact, barrier, layer and an outer, less protective, porous layer.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.59-65
• /
• 2018

The purpose of this study was to examine the perceived oral health status and self-efficacy influencing in university students with fear of intimacy. Data were collected through a questionnaire from 557 university students with self-reporting questionnaires for perceived oral health status, self-efficacy and fear of intimacy. Data were analyzed using SPSS 22.0. The results were analyzed using t tests, analyses of variance, Duncan's multiple range tests, correlation analyses and multiple regression analyses. As the results of this study, The fear of intimacy was low in university students with high self-efficacy and positively perceived oral health status.The variables that have the greatest effect on fear of intimacy were self-efficacy, followed by perceived oral health status, past dating experience.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.214-224
• /
• 2015

The economy of India and so also of many Asian countries depends on bamboos and their uses are not only in domestic items but also in rural housing and raw materials to several industries and germplasm characterization is an important link between the conservation and utilization of plant genetic resources. Classical taxonomic studies of the bamboos are based on floral morphology and growth habit, which can cause problems in identification due to erratic flowering coupled with different biotic agencies and environmental factors. Identification and genetic relationships among accessions of Thamnocalamus falconeri were investigated using morphology and random amplified polymorphic DNAs (RAPD) technique. Analysis started by using 51 vegetative characters and forty two 10-mer primers that allowed us to distinguish different genotypes hailing from different eco- zones of Garhwal Himalayas (India). The selected primers (12) were used for identification and for establishing a profiling system to estimate genetic diversity. A total of 79.33% polymorphism was estimated by using 12 selected primers. The genetic similar analysis was conducted based on binary digits i.e. presence (1) or absence (0) of bands, which revealed a wide range of variability among the species whereas genetic relatedness was quite high based on vegetative characters. Cluster analysis clearly showed two major clusters for both of the markers viz. morphology and RAPD belonging to 10 accessions of T. falconeri. Two major clusters were further divided into minor clusters. Cluster based on RAPD marker showed grouping of accessions of closed locality whereas analogy was reported for vegetative traits. The RAPD technique has the potential for use in species identification and genetic relationships studies of bamboo for breeding program.

• Journal of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.231-237
• /
• 1984

The x-values in the nonstoichiometric chemical formulas $YO_{1.5+x}\;and\;HoO_{1.5+x}$, have been measured in the temperature range from 700$^{\circ}$C to 1000$^{\circ}$C under oxygen pressures from $2{\times}l0^{-1}\;to\;1{\times}10^{-6}$ atm by gravimetric method. The observed x-values increase with increasing temperature and oxygen pressure. The enthalpies of formation of excess oxygen in yttrium oxide and holmium oxide decrease with decreasing oxygen pressure and are all positive values representing an endothermic process. The 1/n values calculated from the slopes of the plots of log x vs. log $P_{O2}$ increase with temperature and are positive values which means the higher oxygen pressure dependence at higher temperature. We have examined the nonstoichiometric defect and conduction mechanism from x-values and thermodynamic data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.4
• /
• pp.355-367
• /
• 2004

The heat transfer and friction characteristics of the heat exchangers having sinusoidal wave fins were experimentally investigated. Twenty-nine samples having different waffle heights (1.5 mm and 2.0 m), fin pitches (1.3mm to 1.7mm) and tube rows (one to three) were tested. Focus was given to the effect of the waffle configuration (herringbone or sinusoidal) on the heat transfer and friction characteristics. Results show that the sinusoidal wave geometry provides higher heat transfer coefficients and friction factors than the herringbone wave geometry, and the difference increases as the number of row increases. The i/f ratios of the herringbone wave geometry, however, are larger than those of the sinusoidal wave geometry. Compared to the herringbone wave geometry, the sinusoidal wave geometry yielded a weak row effect, which suggests a superior heat transfer performance at the fully developed flow region. Possible explanation is provided considering the flow characteristics in wavy channels. Within the present geometric range, the effect of the waffle height on the heat transfer coefficient was not prominent. The effect of the fin pitch was also negligible. Existing correlations highly overpredicted both the heat transfer coefficients and friction factors. A new correlation was developed using the present data.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.45-52
• /
• 2017

PURPOSES : The main purpose of this study is to develop a high elastic modulus and low-shrinkage roller-compacted concrete base (RCCB) in order to prevent fatigue cracking and reflective cracking in the asphalt surface layer of composite pavement. Using a rigid base material with low shrinkage can be a solution to this problem. Moreover, a strong rigid base with high elastic modulus is able to shift the location of critical tensile strain from the bottom of the asphalt layer to the bottom of the rigid base layer, which can prevent fatigue cracking in the asphalt layer. METHODS : Sensitivity analysis of composite pavement via numerical methods is implemented to determine an appropriate range of elastic modulus of the rigid base that would eliminate fatigue cracking. Various asphalt thicknesses and elastic moduli of the rigid base are used in the analysis to study their respective influences on fatigue cracking. Low-shrinkage RCC mixture, as determined via laboratory testing with various amounts of a CSA expansion agent (0%, 7%, and 10%), is found to achieve an appropriate low-shrinkage level. Shrinkage of RCC is measured according to KS F 2424. RESULTS : This study shows that composite pavements comprising asphalt thicknesses of (h1) 2 in. with E2 > 19 GPa, 4 in. with E2 > 15 GPa, and 6 in. with E2 > 11 GPa are able to eliminate tensile strain in the asphalt layer, which is the cause of fatigue cracking in this layer. Shrinkage test results demonstrate that a 10% CSA RCC mixture can reduce shrinkage by 84% and 93% as compared to conventional RCC and PCC, respectively. CONCLUSIONS : According to the results of numerical analyses using various design inputs, composite pavements are shown to be able to eliminate fatigue cracking in composite pavement. Additionally, an RCC mixture with 10% CSA admixture is able to reduce or eliminate reflective cracking in asphalt surfaces as a result of the significant shrinkage reduction in the RCC base. Thus, this low-shrinkage base material can be used as an alternative solution to distresses in composite pavement.