• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.345-345
• /
• 2011

MgO는 암염구조를 가진 전형적인 이온 결합성 화합물로서 7.8eV의 띠틈을 갖고 흡습성이 강하다. 면 방전 구조 PDP에서 MgO 보호막은 면 방전으로 인한 유전층의 식각을 보호하고 2차 전자 방출을 통해 방전 전압을 낮추는 역할을 한다. 하지만 MgO 보호막은 증착시 흡수된 수분이 제거되어야 하고, 방전 특성 개선 및 방전 효율 향상을 위해 가공 처리에 관한 연구가 진행 되어야 한다. 본 연구는 MgO 보호막의 전자적 특성의 변화를 알아보기 위해 $O_2$ 분위기에서 전자빔 증착법을 이용해 MgO Powder를 사용하여 시료를 제작하였다. 표면에 흡착된 수분제거로 인한 특성 변화를 알아보기 위해 진공 챔버내에서 시료를 $500^{\circ}C{\sim}550^{\circ}C$의 열처리를 실시한 후 XPS(X-ray Photoelectron Spectroscopy), REELS(Reflection Electron Energy Loss Spectroscopy), UPS(Ultraviolet photoelectron Spectroscopy)를 이용하여 전자적 특성을 연구하였다. XPS 측정결과 시료의 열처리를 통해 C1s spectrum의 O-C=O(289eV) binding energy가 없어져 박막에 흡착된 불순물이 제거 되었으며 O1s spectrum에서 Hydroxides가 감소하고 530.0eV의 MgO 결합에너지쪽으로 커짐으로써 박막의 구조를 확인할 수 있었다. 그리고 $O^2$ 분위기에서 성장시킨 MgO 박막 기판을 열처리 후 REELS를 이용해 띠틈을 얻어보면 Ep=500eV에서 띠틈이 6.77eV, Ep=1500eV에서 띠틈이 7.33eV로 각각 측정되었다. Ep=500eV의 REELS 스펙트럼으로부터 산소 결함에 의한 표면 F Center는 4.22eV로 확인되었다.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.473-480
• /
• 1996

Synthesis of n-perfluorooctanesulfonyl fluoride(n-PFOSF), which is valuable precursor perfluoro-chemicals, was studied by electrochemical fluorination(ECF). Of prime concern was to investigate the cyclic voltamograms of Ni electrode in anhydrous hydrogen fluoride(AHF) with and without the reactants and to measure fluorine evolution potential. In a batch cell, chronoampherometric electrolysis and various chemical analysis such as GC, GC/MS and IR were used to understand the amphere change of electrode and the reaction paths. Fluorine equilibrium potential was found to be about 2.8V(vs. $Cu/CuF_2$) from the cyclic voltammograms and decay curves of anode potential in AHF. In batch processes, the ECF proceeded in two distinguished steps. The first step proceeded electrochemically and the second one chemically. Under 7V(vs. $Cu/CuF_2$), amount of crude products was proportional to the applied anode potential. Above 7V(vs. $Cu/CuF_2$), it had a hundred percentage with weight ratio of reactants and productivity of PFOSF was almost constant.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.94-98
• /
• 2008

In order to improve the specific capacitance of amorphous hydrous manganese oxide ($MnO_2$) for supercapacitors, it is made into composites with vapour-grown carbon nanofibers (VGCF) having the VGCF ratio as 40 wt% in the composites. The electrochemical properties of these composites are investigated in 1.0 M $Na_2SO_4$ by cyclic voltammetry (CV), impedance measurements and chronopotentiometric charger/discharger. The composite with 40 wt% VGCF shows the superior electrochemical performance, whose specific capacitance (based on the mass of $MnO_2$, $0.8mg/cm^2$) is 380 F/g at 20 mV/s and 230 F/g at 500 mV/s. Also, the cycle-life testing of this electrode carried out for 3,000 charge/discharge cycles at $2.0mA/cm^2$ shows 97% capacitance retention.

• Membrane Journal
• /
• v.26 no.2
• /
• pp.116-125
• /
• 2016

This study described a synthesis of MF having a arsenic removal characteristics and the fundamental research was performed about the simultaneous removal system of both As(III) and As(V) ions with the composite nanofiber membrane (PMF) based on PVdF and MF materials for the water-treatment application. From the TEM analysis, the shape and structure of MF materials was investigated. The mechanical strength, pore-size, contact angle and water-flux analysis for the PMF was performed to investigate the possibility of utilizing as a water treatment membrane. From these results, the PMF11 showed the highest value of mechanical strength ($232.7kgf/cm^2$) and the pore-diameter of composite membrane was reduced by introducing the MF materials. In particular, their pore diameter decreased with an increase of iron oxide composition ratio. The water flux value of PMF was improved about 10 to 60% compared with that of neat PVdF nanofiber membranes. From the arsenic removal characterization of prepared MF materials and PMF, it was shown the simultaneous removal characteristics of both As(III) and (V) ions, and the MF01, in particular, showed the highest adsorption-removal rate of 93% As(III) and 68% As(V), respectively. From these results, prepared MF materials and PMF have shown a great potential to be utilized for the fundamental study to improve the functionality of water treatment membrane.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.201-213
• /
• 1995

By the use of computer simulation including collisional mixing kinetic processes of the B- and C-state in the upper laser level the output characteristics of electron-beam pumped XeF$(C\rightarrowA$ excimer laser are analyzed. We compared the results between experiments and simulations for the $XeF^*(C)$ formation that correlated the number of densities of the $XeF^*(B)$. We obtained good agreement$(28.5 mJ\pm5%)$ with comparisons between experiment and simulation and confirmed the optimal gas mixing ratio of $Xe/F_2/Ar=5.26/0.49/94.28%$ at atmospheric pressure laser medium under the condition of 70 ns [FWHM] electron-beam (800 kV, 21 kA). Also through the simulation we have investigated that the $XeF^*(C)$ formation channel, the $XeF^*(C)$ relaxation channel, and the absorption channel of bluegreen wavelength region as a function of F2 halogen donor and Xe partial pressure. ssure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.335-338
• /
• 2000

Carbon is an attractive candidate for use in eletrochemical supercapacitors that depend on charge storage in the electrode/electrolyte international double layer. Property of an electrical double layer capacitor depend both on the technique used to prepare the electrode and on the current collector structure. The study is to research that V$_2$O$_{5}$-flyash-AC composite electrode for supercapacitor. The discharge capacitance of V$_2$O$_{5}$-flyash-AC(70wt%) in 1st and 50th cycle was 18.6F/g and 15.13F/g at current density of 0.5mA/cm$^2$. The discharge process of V$_2$O$_{5}$-flyash (3 : 97)-AC composite electrode is larger than that others.thers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.14-22
• /
• 2010

The source/channel/drain regions are formed by ion implantation with different dopant types of $n^+/p^{(+)}/n^+$ in the fabrication of the conventional n-type metal-oxide-semiconductor field effect transistor(NMOSFET). In implementing the ultra-small devices with channel length of sub-30 nm, in order to achieve the designed effective channel length accurately, low thermal budget should be considered in the fabrication processes for minimizing the lateral diffusion of dopants although the implanted ions should be activated as completely as possible for higher on-current level. Junctionless (JL) MOSFETs fully capable of the the conventional NMOSFET operations without p-type channel for enlarging the process margin are under researches. In this paper, the optimum design of the JL MOSFET based on silicon nanowire (SNW) structure is carried out by 3-D device simulation and the basic radio frequency (RF) characteristics such as conductance, maximum oscillation frequency($f_{max}$), current gain cut-off frequency($f_T$) for the optimized device. The channel length was 30 run and the design variables were the channel doping concentration and SNW radius. For the optimally designed JL SNW NMOSFET, $f_T$ and $f_{max}$ high as 367.5 GHz and 602.5 GHz could be obtained, respectively, at the operating bias condition $V_{GS}$ = $V_{DS}$ = 1.0 V).

• The Korean Journal of Physiology
• /
• v.17 no.1
• /
• pp.1-11
• /
• 1983

1) The two microelectrode method was used to voltage clamp small preparations of rabbit sinoatrial node. The kinetics of hyperpolarization activated inward current, $i_f$ were analysed. 2) The hrperpolarization pulses activated $i_f$ current in the presence of $10^{-7}g/ml$ TTX and 2 mM $Mn^{2+}$. The activation range was in between -45 mV to -75 mV. The current magnitude was increased and time course was faster by strong hyperpolarization pulses. 3) Standard envelope tests indicated that this current is exponentially controlled by single gate. 4) Semilogarithmic plot of $i_f$ activation versus time was found to be linear in the activation range. The decrease in current magnitude and the shifts in activation curve and rate constants curve to the hyperpolarizing direction were obtained with $Ba^{2+}$, indicating that $Ba^{2+}$ shifts the voltage dependence of the gating kinetics, were partially reversed by 24 mM $K^+$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.19-26
• /
• 1972

A newly developed quartz frequency modulator utili3ing a V. V. C. diode is briefly described. Its electrical characteristics-including modulation linearity, modulation distortion, and carrier frequency stability depending upon the variation of the environmental temperature and the applied power voltage, etc.-are suitable for the modulator of a mobile or a portable F.M. transmitter according to the experimental results. The excellent over-all electrical characteristics were proved from the experimental development of the two kinds of transceivers. One is the single channal transceiver which contains a direct frequency modulator at the carrier frequency of 52.750 MHg. The other is the dual channel transceiver (the frequencies are selected from about 40 channels without tuning adjustment) whose operational frequency is composed of a modulated frequency of 10.7 MHz and the frequency generated at a channel control oscillator, As mentioned above, it is realized that the electrical characteristics of this modulation method are suitable for portable F. M. transceivers.