• 제목/요약/키워드: F-T wax

검색결과 7건 처리시간 0.021초

F-T wax의 수소첨가분해반응에 의한 middle distillate 제조 (Middle distillate production by the hydrocracking of F-T wax)

  • 정헌도;정헌
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.873-875
    • /
    • 2009
  • Middle distillate was produced by the hydrocracking of F-T wax on the zeolite catalysts. Novel metal loaded zeolite catalysts had good performance for hydrocracking of F-T wax. 2 wt.% Platinum loaded H-Y zeolite catalyst showed the highest selectivity of middle distillate and conversion of F-T wax. H-Y zeolite had more strong acidity site and large pore than that of another zeolite catalyst. So, H-Y zeolilte catalyst showed the best activity for hydrocracking of F-T wax.

  • PDF

Bathythermograph Smoked-glass slide의 간역제작법 (SELF-PREPARATION OF BATHYTHERMOGRAPH SMOKED-GLASS SLIDE)

  • 허종수
    • 한국수산과학회지
    • /
    • 제1권2호
    • /
    • pp.135-137
    • /
    • 1968
  • 1938년 A. F. Spillaus에 의하여 Bathythermograph가 고안된 이내 현재까지 수차 개량된 것이 제작판매하게 되어 해양조사 또는 어장탐색에 총중한 측기로 세계 각국에서 널리 보급되었다. 이 측기는 항해중이라도 수심 270m까지 내렸다 올림으로써 수심에 대한 수온이 동시에 연속된 일선으로 도은 또는 Smoked한 유리 판상에 기록되어 신속하게 수온의 미세한 수직분포를 알 수 있어 어장탐사에 필요한 나층의 판별과 그 수탐 및 수온의 판단에 큰 도움을 준다. 여기에서는 1, 2연전 이내 수산진흥원 산하 각 해구 시험소 및 교육기관을 비롯한 해양조사 관계기관에 다수양이 공급되어 널리 사용되고 있는 B.T의 Smoked-glass slide가 없어 사용의 곤란성 및 일본 또는 미국으로부터의 수입의 귀찮은 수속을 해소시키기 위하여 본원에서 실험 제작사용한 결과로서 간단하게 B.T Smoked glass Slide를 제작할 수 있는 방법을 소개하고자 한다.

  • PDF

Mechanical Properties of Polypropylene/Recycled Rubber Blends

  • Axtell, F.H.;Maiseaumsook, T.;Phinyocheep, P.
    • Elastomers and Composites
    • /
    • 제34권3호
    • /
    • pp.212-221
    • /
    • 1999
  • Mechanical properties of polypropylene filled with recycled rubber dusts obtained from the buffing process in sport shoe sole manufacture were investigated. The use of these dusts eliminates the need for the size reduction process which is usually employed in rubber recycling. Two different waxes, polypropylene wax and ethylene vinyl acetate wax, were used in the PP/rubber dust compound. Two different processes, extrusion and injection moulding, were used to study the influence of the blends on the properties. The waxes gave significant improvement in the shaping of the extrudate. It was found that the impact strength of the injection moulded samples were higher than the extruded samples and the virgin PP. The tensile properties (yield stress and modulus) were dependent on the amount of rubber dust addition. An increase in the rubber dust loading gave lower yield stress and modulus.

  • PDF

Fischer-Tropsch 왁스로부터 항공유제조를 위한 촉매연구동향 (Researches Trend to Produce Jet-fuel from Fischer-Tropsch Wax)

  • 박은덕;박명준;김윤하;김명엽;정순용;한정식;정병훈
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.793-794
    • /
    • 2010
  • 피셔트롭스반응은 합성가스 ($H_2+CO$) 로부터 액체연료를 생산하기 위한 목적으로 연구되고 있으며 최근 한정된 석유자원으로 인하여 그 중요성이 증대하고 있다. 이 반응을 통해 생산된 왁스는 수첨분해 반응을 통해 원하는 액체연료 (디젤, 항공유, 윤활유 등) 영역의 수율을 높일 수 있다. 수첨분해반응을 위해선 수소화/탈수소화 기능을 가지는 금속을 포함하고 크래킹 반응을 일으키는 산점을 가지는 양기능성 촉매가 선호된다. 본 연구에서는 수소첨가분해 반응에 이용하는 일반적인 촉매를 알아보고 왁스종류, 반응온도, 반응압력 등 공정변수에 따라 사용가능한 촉매를 조사, 비교하였다.

  • PDF

태양전지 2 단계 전극형성 공정을 위한 마스크 패턴공정 및 효율에 대한 영향성 연구 (Mask Patterning for Two-Step Metallization Processes of a Solar Cell and Its Impact on Solar Cell Efficiency)

  • 이창준;신동윤
    • 대한기계학회논문집B
    • /
    • 제36권11호
    • /
    • pp.1135-1140
    • /
    • 2012
  • 마스크를 이용하여 니켈 시드층의 형성 후 실버 도금을 통해 태양전지 상부전극을 형성하는 2 단계 전극형성 공정이 태양전지의 고효율화 방안으로 제안되었다. 본 연구에서는, 자외선 경화형 혹은 상변화 잉크를 고비용의 인쇄공정을 통해 마스크를 형성하는 방법을 대신하여, 코팅과 레이저의 복합공정을 통해 마스크를 형성하는 방법에 대해 제안하도록 한다. 마스크를 형성하는 물질로서 저비용의 저융점 왁스 혹은 플루오르카본 용액을 태양전지 웨이퍼 상에 코팅 후 레이저로 선택적으로 제거하여 전극패턴을 형성하였으며, 플루오르카본 용액 코팅이 왁스 코팅보다 패턴 균일도 측면에서 우수할 뿐만 아니라 통계적으로 0.16% 태양전지 효율증대를 유발한다는 점이 발견되었다.

Morphological and Genetic Characteristics of Colletotrichum gloeosporioides Isolated from Newly Emerging Static-Symptom Anthracnose in Apple

  • Jeon, Yongho;Cheon, Wonsu
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2014년도 추계학술대회 및 정기총회
    • /
    • pp.34-34
    • /
    • 2014
  • Filamentous fungi of the genus Colletotrichum (teleomorph, Glomerella) are considered major plant pathogens worldwide. Cereals, legumes, vegetables, and fruit trees may be seriously affected by this pathogen (1). Colletotrichum species cause typical disease symptoms known as anthracnoses, characterized by sunken necrotic tissue, where orange conidial masses are produced. Anthracnose appears in both developing and mature plant tissues (2). We investigated disease occurrence in apple orchards from 2013 to 2014 in northern Gyeongbuk province, Korea. Typical anthracnose with advanced symptoms was observed in all apple orchards studied. Of late, static fruit spot symptoms are being observed in apple orchards. A small lesion, which does not expand further and remains static until the harvesting season, is observed at the beginning of fruit growth period. In our study, static symptoms, together with the typical symptoms, were observed on apples. The isolated fungus was tested for pathogenicity on cv. 'Fuji apple' (fully ripe fruits, unripe fruits, and cross-section of fruits) by inoculating the fruits with a conidial suspension ($10^5$ conidia/ml). In apple inoculated with typical anthracnose fungus, the anthracnose symptoms progressed, and dark lesions with salmon-colored masses of conidia were observed on fruit, which were also soft and sunken. However, in apple inoculated with fungi causing static symptoms, the size of the spots did not increase. Interestingly, the shape and size of the conidia and the shape of the appressoria of both types of fungi were found to be similar. The conidia of the two types of fungi were straight and cylindrical, with an obtuse apex. The culture and morphological characteristics of the conidia were similar to those of C. gloeosporioides (5). The conidia of C. gloeosporioides germinate and form appressoria in response to chemical signals such as host surface wax and the fruitripening hormone ethylene (3). In this study, the spores started to germinate 4 h after incubation with an ethephon suspension. Then, the germ tubes began to swell, and subsequently, differentiation into appressoria with dark thick walls was completed by 8 h. In advanced symptoms, fungal spores of virtually all the appressoria formed primary hyphae within 16 h. However, in the static-symptom fungus spores, no primary hyphae formed by 16 h. The two types of isolates exhibited different growth rates on medium containing apple pectin, Na polypectate, or glucose as the sole carbon. Static-symptom fungi had a >10% reduction in growth (apple pectin, 14.9%; Na polypectate, 27.7%; glucose, 10.4%). The fungal isolates were also genetically characterized by sequencing. ITS regions of rDNA, chitin synthase 1 (CHS1), actin (ACT), and ${\beta}$-tubulin (${\beta}t$) were amplified from isolates using primer pairs ITS 1 and ITS 4 (4), CHS-79F and CHS-354R, ACT-512F and ACT-783R, and T1 and ${\beta}t2$ (5), respectively. The resulting sequences showed 100% identity with sequences of C. gloeosporioides at KC493156, and the sequence of the ${\beta}$t gene showed 100% identity with C. gloeosporioides at JX009557.1. Therefore, sequence data from the four loci studied proves that the isolated pathogen is C. gloeosporioides. We also performed random amplified polymorphic DNA-PCR, which showed clearly differentiated subgroups of C. gloeosporioides genotypes. The clustering of these groups was highly related to the symptom types of the individual strains.

  • PDF

다수의 치아 상실과 치아 마모로 인해 수직고경이 감소된 환자의 완전 구강 회복 증례 (Full mouth rehabilitation in a patient with reduced vertical dimension due to numerous tooth loss and excessie worn dentition: A case report)

  • 이은혁;임영준;권호범;김명주
    • 대한치과보철학회지
    • /
    • 제57권4호
    • /
    • pp.456-466
    • /
    • 2019
  • 최근 디지털 치의학 기술이 치과 치료에 다양하게 활용이 되고 있다. 본 증례는 다수의 치아 상실과 치아 마모로 수직고경이 감소한 환자의 치료에서 이러한 디지털 치의학 기술이 어떻게 적용되는지 다루고 있다. 감소한 수직고경을 주의 깊게 평가하여 회복하였고, 최종 수복물을 고려하여 설계한 수술용 가이드를 이용하여 임플란트 식립을 시행하였다. 디지털 악간관계 측정기를 이용하여 하악의 전측방 운동을 측정하여 교합기에 반영하였고, Naturgemäße Aufwachs-Technik (N.A.T.), Natural functional reconstruction (N.F.R.)을 이용한 왁스업 과정을 진행하였다. 이를 스캔하여 CAD/CAM 기술로 임시 수복물을 제작하였고, 기능적, 심미적으로 만족스러운 상태까지 진료실에서 조정과정을 거친 뒤 Computer-Aided-Design/Computer-Aided-Manufacturing (CAD/CAM) 기술을 활용하여 최종 수복물로 그대로 이행될 수 있도록 하였다. 이와 같이 디지털 치의학 기술과 전통적인 방식의 장점을 활용하여 환자와 술자 모두 만족할만한 결과를 얻었기에 이를 보고하고자 한다.