• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.89-90
• /
• 2009

• 산업공학
• /
• 제9권1호
• /
• pp.53-62
• /
• 1996

The Delphi method is widely used for long and middle range forecasting in management science. It is a method by which the subjective data of experts are made to converge using statistical analysis. The Fuzzy Delphi Method(F.D.M.), anew application of the Delphi method using Triangular Fuzzy Numbers(T.F.N.), can help to predict the uncertainty, synthesize the opinion and calculation of those assumed dissemblance index and fuzzy distance. Furthermore, the programming of the F.D.M. process to feed paper and data back to experts can make them more accurately predict the various information.

• 대한환경공학회지
• /
• 제38권9호
• /
• pp.469-475
• /
• 2016

본 연구는 실제 운영되는 수산물 가공 산업폐수의 immersed MBR (iMBR)공정을 이용한 폐수처리시설 운영 결과에 대한 실증적 고찰을 수행한 것이다. 수산물 가공 산업의 특성상 일별, 월별 유량 변동이 심하여 유량조정조의 설계 및 운전방법이 중요하며, 유량조정조 교반시 포기식 교반을 적용하면 산발효 방지를 통하여 후속 응집/부상 공정의 약품비 절감이 가능하다. 동 현장은 유량조정조, 가압부상조, iMBR을 거쳐 방류하며, 이때 가압부상조를 거쳐 iMBR로 유입되는 BOD, $COD_{Mn}$, SS, T-N, T-P의 농도는 2,291 mg/L, 530 mg/L, 38 mg/L, 256.8 mg/L, 13.5 mg/L으로 나타났다. 수산물 가공 폐수와 같이 고농도의 염이 함유된 폐수의 생물학적 처리는 슬러지의 침강성과 관계없는 침지식 중공사막을 이용한 iMBR 공법을 적용하는것이 바람직한 것으로 나타났다. iMBR 공정의 주요 에너지 소모 요인인 공기세정에 대한 운영 값의 검토 결과 SADm값이 $0.31m^3/hr{\cdot}m^2$ membrane area이었으며, SADp값은 $26.5m^3/hr{\cdot}m^3$ permeate으로 상용화된 평막 대비 월등히 에너지 효율이 우수한 것으로 나타났다. 무산소, 혐기, 호기 탈기조로 구성된 침지식 중공사막이 결합된 iMBR 공정에서 막오염 지표인 Normalized TMP와 온도, MLSS 등을 비교 분석한 결과 F/M비가 0.08~0.10 gBOD/gMLSS에서 임계 F/M 값을 나타냈다. 생물반응조에서의 BOD, $COD_{Mn}$, SS, T-N, T-P의 처리수질은 각각 1.8 mg/L, 11.0 mg/L, 1.1 mg/L, 11.0 mg/L, 0.24 mg/L으로 운전되었으며, 제거율은 99.9%, 97.9%, 96.3%, 95.7%, 97.8%으로 나타났다.

• 멤브레인
• /
• 제23권3호
• /
• pp.226-236
• /
• 2013

관형 알루미나 정밀여과와 이산화티타늄 광촉매 코팅 PP (polypropylene) 구의 혼성공정에서 질소 역세척 주기(FT)와 시간(BT)의 영향을 막오염에 의한 저항($R_f$) 및 투과선속(J), 총여과부피($V_T$)의 관점에서 광촉매 첨가 PES (polyethersulfone)구를 사용한 기존 결과와 비교하였다. 일반적인 역세척 방법인 공기가 아닌 질소로 역세척을 한 이유는 공기에 포함된 산소에 의해 수질분석에 영향을 줄 가능성을 최소화하기 위한 것이다. FT가 짧아질수록 $R_f$는 감소하고, J와 $V_T$는 증가하였다. 용존유기물의 평균 처리효율은 82.0%로 PES 구 결과의 78.0% 보다 높았다. 이러한 결과는 광촉매 코팅 PP 구가 광촉매 첨가 PES 구 보다 효과적으로 용존유기물을 제거한다는 것을 의미한다. BT가 길어질수록 최종 $R_f$는 감소하고 최종 J는 증가하였지만, $V_T$는 BT 15초에서 최대값을 보였다. 탁도의 평균 처리효율은 BT 변화에 따라 특별한 경향을 보이지 않았다. BT가 6초에서 30초로 증가함에 따라 용존유기물의 처리효율은 11.8% 증가하여, PES 구의 결과보다 다소 크게 증가하였다.

• Journal of applied mathematics & informatics
• /
• 제4권2호
• /
• pp.477-485
• /
• 1997

Let E be a smooth Banach space. Suppose T:$E \rightarrow E$ is a strongly accretive map. It is proved that each of the two well known fixed point iteration methods (the Mann and ishikawa iteration methods), under suitable conditions converges strongly to a solution of the equation $T_x=f$.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.456-465
• /
• 1988

The performance of the cold latent heat storage is investigated by experiment and by a simplified analytic approach. The heat storage tank has eight horizontal circular tubes and one path of refrigerant evaporating tube. The phase change material in the heat storage tank is water which is frozen by evaporating refrigerant of refrigeration system and melts by the warm air in the heat storage tank. In the experiment, the performance has been studied by the various conditions including the initial water temperature on solidification and flow rate and temperature of air. The rate of recovered heat has been simulated by a simplified model and the results shows a good agreement. In solidification process, initial water temperature causes time delay corresponding to the sensible heat and it is found that the shape of evaporator is important. In melting process, the recovered heat rate from the heat storage tank is proportional to $Re^{0.8}(T_{bi}-T_f)$ of air where $T_{bi}$ and $T_f$ indicate temperatures of inlet air and phase change, respectively. And the deminishing rate of the recovered heat is higher for the higher heat rate.

• 멤브레인
• /
• 제23권1호
• /
• pp.70-79
• /
• 2013

고도정수처리를 위한 관형 세라믹 정밀여과와 이산화티타늄($TiO_2$) 광촉매 첨가 PES (polyethersulfone) 구의 혼성공정에서 질소 역세척 주기(FT)와 시간(BT)의 최적운전조건을 막오염에 의한 저항($R_f$) 및 투과선속(J), 총여과부피($V_T$)의 관점에서 고찰하였다. FT가 짧고 BT가 길수록, $R_f$는 감소하고 J가 증가하여 결국 FT 10분과 BT 30초에서 최대 $V_T$를 얻었다. $F_T$ 영향 실험 결과 NBF (no back-flushing)에서 막오염이 급격히 진행되어 탁도 및 용존유기물의 처리효율이 가장 높게 나타났다. BT 영향 결과에서는, FT 실험과는 다르게 BT 30초에서 최대 처리효율을 보였다. 결과적으로 FT가 감소하고 BT가 증가할수록 광촉매 첨가 구의 세척이 효율적으로 일어나, 탁도 처리효율은 FT가 짧을수록 95.4%에서 97.5%로, BT가 길수록 95.9%에서 98.5%로 다소 증가하였다. 또한 유기물 처리효율은 FT가 짧을수록 70.8%에서 80.6%로, BT가 길수록 75.1%에서 85.8%로 증가하였다. 본 실험 범위에서 처리효율과 $V_T$가 최대인 최적 질소 역세척 조건은 FT 10분과 BT 30초로 판단된다.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.46-51
• /
• 2005

We have developed control electronics to operate flux-locked loop (FLL), and analog signal filters to process FLL outputs for 64-channel Double Relaxation Oscillation SQUID (DROS) magnetocardiography (MCG) system. Control electronics consisting of a preamplifier, an integrator, and a feedback, is compact and low-cost due to larger swing voltage and flux-to-voltage transfer coefficients of DROS than those of dc SQUIDs. Analog signal filter (ASF) serially chained with a high-pass filter having a cut-off frequency of 0.1 Hz, an amplifier having a gain of 100, a low-pass filter of 100 Hz, and a notch filter of 60 Hz makes FLL output suitable for MCG. The noise of a preamplifier in FLL control electronics is $7\;nV/{\surd}\;Hz$ at 1 Hz, $1.5\;nV/{\surd}\;Hz$ at 100 Hz that contributes $6\;fT/{\surd}\;Hz$ at 1 Hz, $1.3\;fT/{\surd}\;Hz$ at 100 Hz in readout electronics, and the noise of ASF electronics is $150\;{\mu}V/{\surd}\;Hz$ equivalent to $0.13\;fT/{\surd}\;Hz$ within the range of $1{\sim}100\;Hz$. When DROSs are connected to readout electronics inside a magnetically shielded room, the noise of 64-channel DROS system is $10\;fT/{\surd}\;Hz$ at 1 Hz, $5\;fT/{\surd}\;Hz$ at 100 Hz on the average, low enough to measure human MCG.

• Preventive Nutrition and Food Science
• /
• 제20권1호
• /
• pp.29-37
• /
• 2015

Most of the wheat germ in cereal grains is removed during the milling process. Various physiological effects have been reported for bioactive substances in wheat germ such as phenolic acids and flavonoids. In this study, the antioxidant and anti-adipogenic effects of ethanol extracts from wheat germ (WGE) and wheat germ fermented with Aspergillus oryzae (F-WGE) were investigated in HepG2 and 3T3-L1 cells. The anti-oxidant activity of F-WGE was demonstrated by a dose-dependent increase in the enhanced scavenging capacity of hydroxyl radicals and $Cu^{2+}$-chelating activity compared to WGE. WGE and F-WGE treatment at doses between 10 and $400{\mu}g/mL$ did not affect the viability of HepG2 and 3T3-L1 cells. Intracellular ROS levels from $Cu^{2+}$-induced oxidative stress were significantly decreased by F-WGE treatment in HepG2 cells compared to WGE. Lipid accumulation was increased in 3T3-L1 adipocytes by $100{\mu}M$ $Fe^{2+}$ treatment, but the accumulation was strongly inhibited by $100{\mu}g/mL$ of WGE and F-WGE treatment. These results suggest that changes in bioactive substances during the fermentation of wheat germ can potentiate scavenging activities against transition metal-induced oxidative stress and lipid accumulation in 3T3-L1 adipocytes. Therefore, we propose that F-WGE is a novel food materials and provided scientific evidences for its efficacy in the development of functional foods.

• 센서학회지
• /
• 제15권4호
• /
• pp.257-262
• /
• 2006

A Fe-C eutectic cell for thermocouple calibration was manufactured and tested to investigate its phase transition characteristics in the thermocouple thermometry. It was observed that the freezing plateaus were strongly affected by the freeze-inducing temperature $T_{f}$. In case of the melting process, the melting plateau was influenced by the previous thermal history. As $T_{f}$. in the previous freezing was lower, the melting plateau became lower with a temperature dependence as small as $-0.0015^{\circ}C/^{\circ}C$. Therefore, it was found that the freeze-inducing temperature should be fixed to obtain a reproducible phase transition temperature in the melting. After fixing $T_{f}$, the melting process was examined and it was found that long and flat melting plateau was obtained within a reproducibility of about ${\pm}0.01^{\circ}C$. Based on the observed results, it was recommended that Fe-C eutectic temperature be best realized for the melting process with a melt-inducing temperature of $+3^{\circ}C$ above the expected liquidus temperature after freezing at $-5^{\circ}C$ below the solidus temperature.