• Korean Journal of Plant Resources
• /
• v.37 no.1
• /
• pp.79-86
• /
• 2024

This study was conducted to determine the conditions for breaking dormancy in the seeds of the North Korean plant resource, Trollius macropetalus, and to investigate its germination characteristics. The morphological characteristics and viability of T. macropetalus seeds were examined. Germination characteristics were investigated based on temperature conditions (15/6℃ & 25/15℃), cold stratification treatment, and GA₃ treatment. The results showed that cold stratification treatment had no effect on breaking the dormancy of T. macropetalus. GA₃ treatment significantly increased the germination rate of T. macropetalus and also improved the mean germination days and germination speed. However, compared to the 15/6℃ condition, the effectiveness of GA₃ treatment for T. macropetalus decreased under the 25/15℃ condition. It was determined that T. macropetalus have a nondeep-type morpho-physiological dormancy. The most effective conditions for breaking dormancy were found to be the 15/6℃ temperature condition and GA₃ treatment at 500 mg·L^-1. The findings of this study are expected to provide valuable information for the mass propagation of T. macropetalus, which has potential applications in landscaping and pharmaceutical materials.

• Journal of Korean Society of Forest Science
• /
• v.14 no.1
• /
• pp.1-20
• /
• 1972

The trend and achievements of forest genetics research in abroad were investigated through observation tours and reference work and following facts were found to be important aspects which should be adopted in the forest genetics research program in Korea. Because of world wide recognization on the urgency of taking a measure to reserve some areas of the representative forest type on the globe before the extingtion of such forest type as the results of continuous exploitations of the natural forests to meet the timber demand all over the world, it is urgently needed to take a measure to reserve certain areas of natural stand of Pinus koraiensis, Pinus parviflora, Pinus densiflora f. erectra, Abies koreana, Quercus sp., Populus sp., etc. as gene pool to be used for the future program of forest tree improvement. And the genetic studies of those natural forest of economic tree species are also to be performed. 1. Increase of the number of selected tree for breeding purpose. Because of the fact that the number of plus tree at present is too small to carry out selection program for tree improvement, particularly for the formation of source population for recurrent selection of parent trees of the 2nd generation seed orchard it is to be strongly emphasized to increase the number of plus tree by alleviating selection criteria in order to enlarge the population size of plus trees to make the selection program more efficient. 2. Progeny testing More stress should be placed on carrying out progeny testing of selected trees with open pollinated seeds. And particular efforts are to be made for conducting studies on adult/juvenile correlation of important traits with a view to enable to predict adult performances with some traits revealed in juvenile age thus to save time for progeny testing. 3. Genotype-environment interaction Studies on genotype and environment interaction should be conducted in order to elucidate whether the plus trees selected on the good site express their superiority on the poor site or not and how the environment affect the genotype. And the justification of present classification of seed distribution area should be examined. 4. Seed orchard of broad leaf tree species. Due to the difficulty of accurate comparison of growth rate of neighbouring trees of broad leaf tree species in natural stand, it is recommended that for the improvement of broad leaf trees a seedling seed orchard is to be made by roguing the progeny test plantation planted densely with control pollinated seedlings of selected trees. 5. Breeding for insect resistant varieties. In the light of the fact that the resistant characteristics against insect such as pine gall midge (Thiecodiplosis japonensis U. et I.) and pine bark beetle (Myelophilus pinipera L.) are highly correlated with the amount and quality of resin which are known as gene controlled characteristics, breeding for insect resistance should be carried out. 6. Breeding for timber properties. With the tree species for pulp wood in particular, emphasis should be placed upon breeding for high specific gravity of timber. 7. Introduction of Cryptomeria and Japanese Cypress In the light of the fact that the major clones of Cryptomeria are originated from Yoshino source and are being planted up to considerably north and high elevation in Japan, those species should be examined on their cold resistance in Korea by planting them in further northern part of the country.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.303-313
• /
• 2020

Rice grain shape is one of the key components of grain yield and market value. An understanding of the genetic basis of the variation in grain shape could be used to improve grain shape. In this study, we developed a total of 265 F₂ individuals derived from a cross between japonica cultivars (Josaeng-jado and Langi) and used this population for quantitative trait locus (QLT) analysis. Correlation analysis was performed to identify relationships between grain traits (GL: grain length, GW: grain width, L/W: ratio of length to width, TGW: 1,000 grain weight). The grain shape was positively correlated with GL and TGW, and negatively correlated with GW. In QTL analysis associated with grain shape, one QTL for GL, qGL5, detected on chromosome 5, explained 20.3% of the phenotypic variation (PV), while two QTLs, qGW5 (PV=36.1) and qGW7 (PV=26.1), for GW were identified on chromosomes 5 and 7, respectively. Evaluation of the effects of each of the QTLs on the grain shape in the population showed a significant difference in the grain size in positive lines compared with the lines without the QTLs. According to the QTL combination of the allelic-types, the grain shape of the tested lines varied from semi-round type to long spindle-shaped type. The results of this study extend our knowledge about the genetic pool governing the diversity of grain shape in japonica cultivars and could be used to improve the grain shape of this species through marker-assisted selective breeding in Korea.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.63-67
• /
• 2015

Purpose Among various causes that influence image quality degradation, various methods for decrease in Artifact occurred by respiration of patients are being used. Among them, this study intended to evaluate CTAC Shift correction method and additional scan compare to the Scan(Q static scan) using respiratory gated system. Materials and Methods This study was conducted on 10 patients, and used PET-CT Discovery 710 (GE Healthcare, MI, USA) and Varian's RPM system. 5.18 Mbq per kg of $^{18}F$-FDG was injected on patients, asked them to take a rest for 1 hour in the bed, and conducted test after urination. Images were visualized through Q static scan, CTAC Shift correction method, Additional scan based on the Whole body scan(WBS) with Artifact. Decrease in Artifact was compared in each image, conducted Gross Evalution, and measured changes of SUVmax. Results For image obtained through the CTAC Shift correction method through WBS with Artifact, 12~56%, Q static scan image showed 17~54% of change rate and Additional Scan showed -27~46% of change rate. In Blind Test, the CTAC Shift correction image showed the highest point with 4 points, Q static scan image showed 3.5 points, and Additional scan image showed 3.4 points. The standardized WBS scan through Oneway ANOVA and three types of Scan method showed significant difference(p<0.05), and did not show significant difference between the three Scan methods(p>0.05). However, the three Scan methods showed significant difference in Blind test. Conclusion Additional scan and Q static scan require more time than the CTAC Shift correction method, there is concern about excessive exposure to patients by CT rescan and Q static scan is difficult to apply on patients with inconsistent respiration or irregular respiration cycle due to pain. For CTAC Shift correction method, limited correction is possible and the range is limited as well. It is considered as a useful method of improving diagnostic value when hospitals use the system appropriately and develop various advantageous factors of each method.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.26-35
• /
• 2013

This study was conducted to select superior provenances of Scots pine (Pinus sylvestris L.) well adapted to Korean environment for timber production. In 1976, twenty-two provenances of Scots pine were introduced from Sweden and the seeds were sown in seed beds in March. After one year, the seedlings were transplanted to nursery beds. The resulting 1-1 seedlings of 22 provenances were planted at Whaseong in 1978. Randomized complete block design with 3 replications were used for test plantation. Each provenance was planted with 20-tree row plot in each block and at a spacing of $1.8{\times}1.8m$. The growth performance of each provenance was monitored up to 33-years after planting. There were significant differences among provenances in volume growth. F3001 provenance showed the best volume growth of 33-years after planting ($0.160m^3$), which was 2.2 times greater than that of the lowest provenance W2027 ($0.072m^3$). The ranking of provenances was stabilized after 14 years. Comparing to reference tree species, Japanese red pine (Pinus densiflora), all Scots pine provenances showed poor growth performance. In other words, volume growth of Japanese red pine at age 28 and 33 were 2.1 and 3.3 times greater than that of Scots pine, respectively. Moreover, survival rate of Scots pine was lower than that of Japanese red pine. Based on these results, it was suggested that Scots pine was not suitable to Korean environments. The cause of maladaptation of Scots pine and the implications of introduction breeding were discussed.

• Journal of Life Science
• /
• v.20 no.8
• /
• pp.1186-1192
• /
• 2010

Soybean [Glycine max(L.) Merr.] is an important crop, accounting for 48% of the world market in oil crops. Improvements in economic traits, such as quality and oil constituents, arethe most important objectives in soybean breeding. The objective of this study was to identify quantitative trait loci (QTLs) that control seed size and fatty acid contents in soybean. 115 $F_{2:10}$ recombinant inbred lines (RIL) developed from a cross of 'Keunolkong' and 'Iksan10' were used. Narrow-sense heritability estimates based on a plot mean on 100 seed weight, saturated fatty acid (palmitic acid + stearic acid), and oleic, linoleic, and linolenic acid content were 0.72, 0.60, 0.83, 0.77 and 0.81, respectively. The 100 seeds weight was related to seven QTLs located on chromosomes 1, 3, 8, 9, 16 and 17. Two independent QTLs for saturated fatty acid content were identified on chromosomes 17 and 19. Five independent QTLs for oleic acid content wereidentified on chromosomes7, 11, 14, 16 and 19. Five QTLs for linoleic acid content were located on chromosomes 2, 11, 14, 16 and 19. Three QTLs for linolenic acid content were located on chromosomes 8, 10 and 19. Oleic, linoleic, and linolenic acid had one major common QTL on chromosome 19. Thus, linoleic and linolenic acid content were identified as common QTLs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.82-89
• /
• 2014

Purpose: The purpose of this study was to observe the change of viscoelastic properties of dental resin cements during polymerization. Materials and methods: Six commercially available resin cement materials (Clearfil SA luting, Panavia F 2.0, Zirconite, Variolink N, RelyX Unicem clicker, RelyX U200) were investigated in this study. A dynamic oscillation-time sweep test was performed with AR1500 stress controlled rheometer at $32^{\circ}C$. The changes in shear storage modulus (G'), shear loss modulus (G"), loss tangent (tan ${\delta}$) and displacement were measured for twenty minutes and repeated three times for each material. The data were analyzed using one-way ANOVA and Tukey's post hoc test (${\alpha}$=0.05). Results: After mixing, all materials demonstrated an increase in G' with time, reaching the plateau in the end. RelyX U200 demonstrated the highest G' value, while RelyX Unicem (clicker type) and Variolink N demonstrated the lowest G' value at the end of experimental time. Tan ${\delta}$was maintained at some level and reached the zero at the starting point where G' began to increase. The tan ${\delta}$and displacement of the tested materials showed similar pattern in the graph within change of time. The displacement of all 6 materials approached to zero within 6 minutes. Conclusion: Compared to other resin cements used in this study, RelyX U200 maintained plastic property for a longer period of time. When it completed the curing process, RelyX U200 had the highest stiffness. It is convenient for clinicians to cement multiple units of dental prostheses simultaneously.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.244-249
• /
• 2011

This in vitro study compared the remineralization of incipient interproximal caries in the presence of three glass ionomer cements(highly-filled glass ionomer cement, resin-modified glass ionomer cement, compomer) and a resin composite(control). Thirty-two extracted premolars were selected based upon the lack of any visible demineralization. The teeth were coated in a transparent acid resistant nail varnish leaving $3{\times}3$ mm square. The teeth were subjected to the demineralizing buffer for 3 days and quantitative light-induced fluorescence(QLF) images of the subjects were taken. Proximal restoration was simulated by placing tooth specimens and the various glass ionomer cements in closed containers with artificial saliva at $37^{\circ}C$ and pH 7.0 with constant circulation. Further QLF images were subsequently taken at 30, 60, and 90 days. The changes of mineral loss(${\Delta}Q$) were evaluated by QLF and the change of ${\Delta}Q$(${\Delta}{\Delta}Q$) were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using ANOVA and the post-HOC Dunnett C multiple comparison test at p<0.05. While ${\Delta}Q$(changes of mineral loss) increased for all treatments, the increases for three glass ionomer groups were significantly higher than that for the resin group at first month period. As time went on, the amount of ${\Delta}{\Delta}Q$ decreased.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.285-294
• /
• 2010

The purpose of this study was to evaluate the viability of periodontal ligament cells of rat teeth after low-temperature preservation under high pressure by means of MTT assay, WST-1 assay. 12 teeth of Sprague-Dawley white female rats of 4 week-old were used for each group. Both side of the first and second maxillary molars were extracted as atraumatically as possible under tiletamine anesthesia. The experimental groups were group 1 (Immediate extraction), group 2 (Slow freezing under pressure of 3 MPa), group 3 (Slow freezing under pressure of 2 MPa), group 4 (Slow freezing under no additional pressure), group 5 (Rapid freezing in liquid nitrogen under pressure of 2 MPa), group 6 (Rapid freezing in liquid nitrogen under no additional pressure), group 7 (low-temperature preservation at $0^{\circ}C$ under pressure of 2 MPa), group 8 (low-temperature preservation at $0^{\circ}C$ under no additional pressure), group 9 (low-temperature preservation at $-5^{\circ}C$ under pressure of 90 MPa). F-medium and 10% DMSO were used as preservation medium and cryo-protectant. For cryo-preservation groups, thawing was performed in $37^{\circ}C$ water bath, then MTT assay, WST-1 assay were processed. One way ANOVA and Tukey HSD method were performed at the 95% level of confidence. The values of optical density obtained by MTT assay and WST-1 were divided by the values of eosin staining for tissue volume standardization. In both MTT and WST-1 assay, group 7 ($0^{\circ}C$/2 MPa) showed higher viability of periodontal ligament cells than other group (2-6, 8) and this was statistically significant (p < 0.05), but showed lower viability than group 1, immediate extraction group (no statistical significance). By the results of this study, low-temperature preservation at $0^{\circ}C$ under pressure of 2 MPa suggest the possibility for long term preservation of teeth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.2
• /
• pp.143-148
• /
• 2017

Soybean [Glycine max (L.) Merr.] seed is an important dietary source of protein, oil, carbohydrates, isoflavones, and other nutrients for humans and animals. Raffinose and stachyose are the main antinutritional factors in soybean seed. They are carbohydrates belonging to the raffinose family of oligosaccharides, which are not readily digested in humans and cause flatulence or diarrhea. The genetic reduction of the raffinose and stachyose contents in mature soybean seeds will improve the nutritional value of soybean. The objective of this research was to evaluate agronomic traits with 10 $F_6$ strains selected from breeding populations derived from a cross among seven parents. The contents of raffinose and stachyose in mature seeds were detected by high-performance liquid chromatography. Agronomic traits such as flower color, flowering date, harvesting date, lodging, plant height, seed coat color, hilum color, 100 seed weight, and yield were evaluated. Ten intermediate parents showed low raffinose and stachyose contents. The intermediate parent 883-1 had a small seed size, six intermediate parents (15A1, 15D1, RS-5, RS-33, RS-64, and RS-70) had a medium seed size, and two intermediate parents (14G20 and RS-21) had a large seed size. The intermediate parent RS-21 had a black seed coat and a green cotyledon. Four intermediate parents (883-1, 14G20, RS-5, and RS-21) had elite agronomic traits. The new intermediate parents developed through this study will be used to develop improved soybean cultivars with low contents of raffinose and stachyose.