• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1617-1620
• /
• 1999

In this work, the effect of blend on physical and electrical properties investigated. The two kinds of low-density polyethylene (LDPE) whose densities are evaluated at $0.9179[g/cm^3]$ and $0.9192[g/cm^3]$, respectively, were used and blended according to the different blend ratio. The LDPE with the blend ratio of 50[wt%] represented the lowest impulse breakdown strength, $F_{BImp}$ at $30[^{\circ}C]$, but the highest $F_{BImp}$ at $90[^{\circ}C]$. DC breakdown strength, $F_{BDC}$. decreased with the increase of blend ratio at $30[^{\circ}C$, but increased at $60[^{\circ}C]$. The current density decreased with a blend ratio up to 75 [wt%] at $90[^{\circ}C]$. By analyzing the diffraction patterns of XRD, we found that the LDPE with the blend ratio of 50 [wt%] represented the largest crystal size of (020) plane. We investigated the relationship between the effect of blend and electrical properties and these results are discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.533-538
• /
• 2000

In R.C. flat slab system, a brittle punching failure is a very fatal problem. But there is no generally well-defined answer to the problem and there are wide differences in current practical design codes. therefore, in this study, the factors affecting to punching failure mechanism have been studied to find out the punching shear behavior in R.C. flat slabs by comparing other investigations and practical design codes. Therefore, In this study, the factors affecting to punching failure mechanism have been studied to find out the punching shear behavior in R.C. flat slabs by comparing other investigations and practical design codes. The conclusions in this study are summarized as follows; 1) The factors affecting to punching shear are concrete strength ($f_\alpha$), ratio of column side length to slab depth (c/d), ratio of distance from column center to radial contraflexure (l/d), yield strength of steel ($f_y$), flexural reinforcement ratio ($\rho$) and size effects. 2) It is shown that th use of $\surd{f_{ck}}$in applying($f_\alpha$ to punching shear strength estimation may be more sensitive in high concrete strength. 3) The effects of l/d, ($f_y$, size are no clear in the punching failure mechanism, so in the future, it should be investigated with the effects of various composed load.

• Bulletin of the Korean Chemical Society
• /
• 제8권4호
• /
• pp.332-335
• /
• 1987

This paper is a continuation of our previous $paper,^1$ and deals with Eq.(1) (see the text), which was theoretically derived in the $paper,^1$$ [{\eta}]^f\; and\; [{\eta}]^0$ is the intrinsic viscosity at stress f and f = O, respectively. Equation (1) predicts how $[{{\eta}}]^f / [{\eta}]^0$ changes with stress f, relaxation time ${\beta}_2$ of flow unit 2 and a constant $c_2$ related with the elasticity of molecular spring of flow unit 2. In this paper, Eq.(1) is applied to a biopolymer, e.g., poly (${\gamma}$-benzyl L-glutamate), and nonbiopolymers, e.g., polyisobutylene, polystyrene, polydimethylsiloxane and cellulose triacetate. It was found that the $c_2$ factor is zero for non-biopolymers while $c_2{\neq}0$ for biopolymers as found $previously.^1$ Because of the non-Newtonian nature of the solutions, the ratio $[{{\eta}}]^f / [{\eta}]^0$ drops from its unity with increasing f. We found that the smaller the ${\beta}_2,$ the larger the $f_c$ at which the viscosity ratio drops from the unity, vice versa.

• 한국지진공학회논문집
• /
• 제24권5호
• /
• pp.219-232
• /
• 2020

The slip-weakening model developed by Ohnaka and Yamashita is extended over the breakdown zone by equating the scaling relationships for the breakdown zone and the whole rupture area. For the extension, the study uses the relationship between rupture velocity and radiation efficiency, which was derived in the theory of linear elastic fracture mechanics, and the definition of f_max given in the specific barrier model proposed by Papageorgiou and Aki. The results clearly show that the extended scaling relationship is governed by the ratio of rupture velocity to S wave velocity, and the velocity ratio can be determined by the ratio of characteristic frequencies of a Fourier amplitude spectrum, which are corner frequency, f_c, and source-controlled cut-off frequency, f_max, or vice versa. The derived relationship is tested by using the characteristic frequencies extracted from previous studies of more than 130 shallow crustal events (focal depth less than 25 km, M_W 3.0~7.5) that occurred in Japan. Under the assumption of a dynamic similarity, the rupture velocity estimated from f_max/f_c and the modified integral timescale give quite similar scale-dependence of the rupture area to that given by Kanamori and Anderson. Also, the results for large earthquakes show good agreement to the values from a kinematic inversion in previous studies. The test results also indicate the unavailability of the spectral self-similarity proposed by Aki because of the scale-dependent rupture velocity and the rupture velocity-dependent f_max/f_c; however, the results do support the local similarity asserted by Ohnaka. It is also remarkable that the relationship between the rupture velocity and f_max/f_c is quite similar to Kolmogorov's hypothesis on a similarity in the theory of isotropic turbulence.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권6호
• /
• pp.733-738
• /
• 2000

The objective of this study was to describe the nature of the inheritance of jumping as a behavioral trait and to analyze quantitatively the jumping height as a measure of vigor in two subspecies of mice. Two subspecies of mice, Yonakuni wild mouse (Y) and $CF_{{\sharp}1}$ laboratory mouse (C), were used as the parental types. Reciprocal mating between these two subspecies was made to produce subsequently the first and second generations. The first generation was $F_1$ (YC) resulting from $Y\;male{\times}C\;female$, and $F_1{^\prime}$ (CY) from $C\;male{\times}Y\;female$. The second generation $F_2$ (YCYC) was from mating $F_1{\times}F_1$ and $F_2{^\prime}$ (CYCY) from $F_1{^\prime}{\times}F_1{^\prime}$. Individuals were treated with a set of direct current shock apparatus at six weeks of age to evoke jumping. The results showed that the ratio between jumping and non jumping mice (J: NJ) for C was 0%:100% (0:1), which means that all C did not jump throughout the experiment, whereas Y was 68%:32% (2:1); and the $F_1$ and $F_2$ showed 65%:35% (2:1) and 51%:49% (1:1), respectively. All $F_1{^\prime}$ and $F_2{^\prime}$ individuals jumped as indicated by the ratio 100%:0% (1:0) for both these two genetic groups. Of the jumped mice, average height of the first three jumping observed for pooled sexes in Y, $F_1$, $F_2$, $F_1{^\prime}$ and $F_2{^\prime}$ were 19.3 cm, 19.3 cm, 18.0 cm, 19.9 cm and 16.4 cm, respectively. The distribution of jumping height showed a tendency to be a normal distribution. The jumping activity and jumping height may be affected by some major genes and polygenes, respectively.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.105-113
• /
• 2006

본 연구는 잔골재와 굵은 골재를 전량 플라이애쉬로 치환한 콘크리트의 공학적 특성을 밝히기 위한 실험적 연구의 결과이다. 그리고 플라이애쉬 전량 치환 콘크리트의 유동성 저하 문제를 추가수량($W_f$)으로 해결하고자 하였다. 실험은 물-시멘트 비($W_c/C$)를 0.35, 0.45 그리고 물-플라이애쉬 비($W_f/FA$)를 0.35, 0.45로 하였다. 플라이애쉬 치환은 P와 Q의 두 가지 방법으로 하였다. P 방법은 플라이애쉬와 첨가수량($W_f$)의 중량이 골재의 중량과 같은 배합법이다[$FA+W_f$ = G (또는 S)]. Q 방법은 플라이애쉬와 골재의 중량이 같고 첨가수량($W_f$)을 추가하는 배합법이다 [$FA+W_f$ > G (또는 S)]. 실험은 굳기 전 콘크리트의 특성과 3, 7, 28 및 91일 압축강도 특성을 측정하였다. 실험결과 압축강도는 $Wc/C=0.35$, $W_f/C=0.35$ 일 때, P 치환법 중에서 잔골재 치환이 다른 배합들보다 향상되었다. Q 방법은 P 방법에 비해 유동성은 향상되었으나, 압축강도는 그렇지 않았다. 실험결과는 잔골재와 굵은 골재를 플라이애쉬로 전량 치환한 콘크리트의 유동성과 강도 특성이 향상됨을 알 수 있었고, 플라이애쉬 치환방법으로 효과적임을 보여주었다.

• 한국수산과학회지
• /
• 제8권1호
• /
• pp.7-10
• /
• 1975

제주도 고등어 자망어업의 주어기인 1974년 5월 28일부터 8월 31일까지 서귀포와 비양도근해어장에서 고등어 자망어구의 이망율에 관한 시험조업결과는 다음과 같다. 1. $X^2$ t 검정에 의하면 고등어 nylon-monofilament 자망 B형이 nylon-multifilament 자망 A형보다 이망성능이 우위하고 나망율비는 $m_A:m_B=1:1.8$이다. 2. 망목 75mm인 nylon-monofilament 자망 C형, D형이 망목 85mm인 nylon-monofilament 자망 E형 F형 보다 이망성능이 우위하고 이망율비는 $m_E{\cdot}F:m_C{\cdot}D=1:2.8$이다. 3. 망계 굵기가 120tex와 75tex이고 망목이 75m 및 85mm인 C, D, E, F, 형에서는 상호간의 우위는 모두 확인할 수 없었다.

• 한국전기전자재료학회논문지
• /
• 제13권8호
• /
• pp.675-680
• /
• 2000

In this study the temperature coefficient of resonant frequency(TC $F_{r}$) dielectric and piezoelectric properties of Pb[(S $b_{1}$2//N $b_{1}$2/)$_{0.065}$)-(Z $r_{x}$, $Ti_{1-x}$ )$_{0.90}$] $O_3$ceramics were investigated with Zr/Ti ratio. The compositions near the morphotropic phase boundary (MPB) appeared when Zr/Ti ratio was 49.5/50.5 The dielectric constant and electromechanical coupling factor( $k_{p}$) also showed the highest values of 1,257, 0.653 respectively when the Zr/Ti ratio was 49.5/50.5 Moreover the mechanical quality factor( $Q_{m}$) showed th lowest value of 713 when the Zr/Ti ratio. The temperature coefficient of resonant frequency(TC $F_{r}$) abruptly change at the morphotropic phase boundary(MPB) which existed between the rhombohedral phase with highly negative TC $F_{r}$ of -106ppm/$^{\circ}C$ and the tetragonal phase with highly positive TC $F_{r}$ of +64pp $m^{\circ}C$ as Zr/Ti ratio varied from 50/50 to 49.5/50.5.50.5..50.5.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.284-284
• /
• 2011

Recently, the increasing degree of device integration in the fabrication of Si semiconductor devices, etching processes of nano-scale materials and high aspect-ratio (HAR) structures become more important. Due to this reason, etch selectivity control during etching of HAR contact holes and trenches is very important. In this study, The etch selectivity and etch rate of TEOS oxide layer using ACL (amorphous carbon layer) mask are investigated various process parameters in CH2F2/C4F8/O2/Ar plasma during etching TEOS oxide layer using ArF/BARC/SiOx/ACL multilevel resist (MLR) structures. The deformation and etch characteristics of TEOS oxide layer using ACL hard mask was investigated in a dual-frequency superimposed capacitively coupled plasma (DFS-CCP) etcher by different fHF/ fLF combinations by varying the CH2F2/ C4F8 gas flow ratio plasmas. The etch characteristics were measured by on scanning electron microscopy (SEM) And X-ray photoelectron spectroscopy (XPS) analyses and Fourier transform infrared spectroscopy (FT-IR). A process window for very high selective etching of TEOS oxide using ACL mask could be determined by controlling the process parameters and in turn degree of polymerization. Mechanisms for high etch selectivity will discussed in detail.

• Wind and Structures
• /
• 제38권1호
• /
• pp.59-74
• /
• 2024

Large Eddy Simulation (LES) is used to explore the influence of vibration frequency and amplitude on the aerodynamic performance of a rectangular cylinder with an aspect ratio of B/D=5 (B: breadth; D: depth of cylinder) at a Reynolds number of 22,000 near resonance frequency. In smooth flow conditions, the research employs a sequence of three-dimensional simulations under forced vibration with diverse frequency ratios f_e / f_o = 0.8-1.2 (f_e : oscillation frequency; f_o : Strouhal frequency when the rectangular cylinder is stationary ) and oscillation amplitudes A_h/D = 0.05 - 0.3. The individual influences of f_e / f_o and A_h/D on the characteristics of integrated and distributed aerodynamic forces are the focal points of discussion. For the integrated aerodynamic force, particular emphasis is placed on the analysis of the dependence of velocity-proportional component C₁ and displacement-proportional component C₂ of unsteady aerodynamic force on amplitude and frequency ratio. Near the resonance frequency, the dependencies of C₁ and C₂ on amplitude are stronger than that of frequency ratio. For the distributed aerodynamic force, the increase in frequency and amplitude promotes the position of the main vortex core and reattachment to the leading edge in the streamwise direction. In the spanwise direction, vibration enhances the spanwise correlation of aerodynamic force to weaken the three-dimensional effect of the flow field, and a lower frequency ratio and larger amplitude amplify this effect.