• 제목/요약/키워드: F&B.

검색결과 6,568건 처리시간 0.039초

이원천 유역의 하천수질에 미치는 지형요인 (The Topographical Factors Affecting the Water Quality of Iwonchon Basin)

  • 이호준;방제용
    • The Korean Journal of Ecology
    • /
    • 제22권3호
    • /
    • pp.101-108
    • /
    • 1999
  • 지형요인이 어떻게 수질에 영향을 주는가를 연구하고자 1993년 3월 부터 1998년 3월까지 조사를 실시하였다. 조사지는 충북 옥천군 이원면의 경작지가 주류를 이루는 개심저수지와 산지유역으로 특성지워지는 장찬저수지 유역을 대상으로 하였다. 조사유역을 11개 소집수역으로 세분하고 지형학적 특성과 하천수질과의 상관성, 하천 유역의 오염원 동태를 생태학적 관점에서 규명하고자 조사를 실시하였다. 개심저수지 유역의 형상계수는 0.030∼0.210(평균 0.090), 장찬저수지 유역의 형상계수는 0.217∼0.452 (평균 0.325)로 장찬저수지 유역의 형상계수가 3.61배 더 높다. 개심저수지의 E(지정리와 미동리), F(윤정리) 소집수역은 금강유역 전체의 형상계수 0.063과 비슷하여 홍수유속시간이 금강과 유사하였다. 하천길이와 유역면적의 관계식은 L=1.44A/sup 0.06/로 보정되었다. 환상율은 개심저수지 유역 17.114, 장찬저수지 유역 7.444로, 강수도달시간은 금강 전체 유역보다 5배 빠른 것으로 추정되었다. 세장율은 개심저수지 유역 0.357 (금강 0.282), 장찬저수지 0.636으로 나타나 장찬저수지 유역에서 강수집합시간이 1.54배 더 빠른 것으로 나타났다. 각 집수역별 강수도달시간은 장찬저수지 유역의 A' 소집수역이 337.53 min.로 가장 느렸으며 개심저수지 유역의 H 소집수역은 49.26 min.로 가장 빠른 것으로 나타났는데, 대체적으로 하류로 갈수록 강수집합시간이 빠른 것으로 나타났다. 곡의 밀도는 0.500∼l.337범위에 있었으며 강수침투와는 역의 상관을 나타낸다. 따라서 인위적으로 하천을 막거나 개절(開切), 직선배수로화는 홍수를 유발할 가능성이 많고, 하천의 자정능력을 떨어뜨리는 결과를 낳을 것으로 판단되었다. 개심저수지와 장찬저수지의 수계빈도(Df)와 곡의 밀도(Dd)의 관계는 개심저수지 유역 Df=0.023Dd², 장찬저수지유역 Df=0.189Dd²으로 산정되었다. 평균경사는 개심 14.03, 장찬 16.9로서 장찬저수지가 유량이 많아지기 쉬운 것으로 조사 되었다. 경사가 증가하면 용존산소량은 증가하지만, 증가폭은 크질 않은 것으로 나타났다. COD와 평균경사는 유의한 상관이 없었으나 BOD는 평균경사와 유의한 상관이 있는 것으로 조사되었다. 형상계수와 환상률 및 총질소와의 관계는 형상계수(Y/sub TKN/=0.7271X+0.0967)와 환상률이 커질수록 TKN이 증가하였다. (Y/sub TKN/=0.1577X-0.1501). BOD와 COD는 1BOD/l.2COD의 관계가 있었다.

  • PDF

생쥐에서 과배란 유도시 인간융묘 성선자극 홀몬 투여 방법이 체외수정 및 배자의 체외성장에 미치는 영향에 관한 연구 (The Effect of the Timing and Dose of Human Chorionic Gonadotropin on Oocyte Recovery, in Vitro Fertilization, and Preimplantation Development in Superovulation of Mouse)

  • 양승희;김향미;오승은;손영수;유한기;우복희
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제21권2호
    • /
    • pp.165-176
    • /
    • 1994
  • This study was carried out to investigate the effect of the timing and dose of human chorionic gonadotropin(hCG) on oocyte recovery, in vitro fertilization, and preimplantation development in superovulation of mouse. F1 hybrid($C57BL{\times}CBA$) mice were obtained and superovulation was induced in female mice by sequential intraperitoneal injection of PMSG and hCG. In the first series of experiments, mice received 5 IU of PMSG given intraperitoneally, and 48 hours later were injected 1 IU, 5 IU, or 10 IU of hCG respectively. In the second series of experiments, mice received 5 IU of PMSG given intraperitoneally and were injected 5IU of hCG 36, 48, or 60 hours later respectively. 1. When the mice received 5 IU of PMSG given intraperitoneally and 48 hours later were injected 1 ItT, 5 IU, or 10 IU of hCG respectively, there were no differences in the total number of the oocytes obtained from the three experimental groups. When the cultures were examined 48 hrs after the termination of insemination the proportion of unfragmented oocytes which had developed over two-cell stage was observer to be lowest in 10 IU hCG group. When the cultrues were examined 120 hour after termination of insemination the proportion of embryos which had developed to the blastocyst stage was observed to be significantly higher in 10IU hCG group than 5IU hCG group(p<0.05), but there was no difference between 10 IU hCG group and 1IU hCG group. 2. When the mice received 5 IU of PMSG and were injected 5 IU of hCG 36, 48, or 60 hours later respectively, there were no differences in the total number of oocytes obtained from the three experimental groups. When cultures were examined 48 hour after the termination of insemination the proportion of unfragmented oocytes which had developed over two-cell stage was observed to be significantly lower in 36 hour interval group than 48 hour interval and 60 hour interval group(p<0.05). When the cultures were examined 120 hour after termination of insemination the proportion of embryos which had developed to the blastocyst stage was found to be higher in 60 hour interval group than 36 interval or 48 hour interval group (P<0.05), and the proportion of hatching blastocyst was found to be higher in 60 hour interval group as well. In this study, it was concluded that the administration of adequate dose of hCG, and long (60 hour) PMSG-hCG interval were necessary in superovulation of mice($C57BL{\times}CBA$) in order to get a large number of oocytes which had an early oocytes which had an early embryonic developmental capability when fertilized in vitro, and especially it had better have been avoided to administer a large dose of hCG.

  • PDF

쥐불놀이 (논둑태우기)가 해충 및 천적상에 미치는 영향 (Influence of the Levee-burning on the Fauna of Insect Pests and Their Natural Enemies)

  • 김홍선;이영인;이해빈
    • 한국응용곤충학회지
    • /
    • 제29권3호
    • /
    • pp.209-215
    • /
    • 1990
  • 녹둑태우기가 벼해충 및 천적밀도에 미치는 영향을 확인하기 위향 1987년 2월 20일 수원시 서둔동에 위치한 시험포장의 논둑$(72\times1m)$에서 불태운 곳과 태우지 않은곳에서의 해충 및 천적밀도를 조사한 결과 불태운 직후에는 논뚝이다 그 주변에 해충(주로 애멸구약충)도 천적(주로 거미류)도 하나도 없었다. 불태운 후 약 60일이 지난뒤에는 식생과 동물상이 서서히 회복되기 시작하여 불태우지 않은 곳에 비하여 불태운 곳의 초생이 왕성하여졌고 75일이 지난뒤 (5월 상순)에는 해충과 천적의 밀도가 높아졌다. 해충이나 천적밀도를 회복시킨 개체들은 모두 가까운 주변으로부터 확산 되어 온 것으로 추정되며 만일 불태운 면적이 훨씬 더 넓었을 경우에는 곤충류의 밀도회복에 더 긴 시간이 필요할 것이며 날개가 없는 거미류는 날개가 있는 해충류보다 밀도회복에 더 오랜 시간이 필요할 것으로 생각된다. 황산적거미는 $9^{\circ}C$에서 섭식활동이 이루어지는 것으로써 일반 해충류(특히 애멸구)보다 발육임계온도가 낮으므로 이른봄의 영야요구도가 높을 것으로 추정되며 아울러 불태운곳에서 살아남을 확률이 일반 해충류보다 낮을 것으로 생각된다. 쥐불놀이(음력 정월 대보름)를 하는 날짜가 해에 따라 대부분의 차이는 있으나 일반적으로 논둑에서 월동하는 절족동물중 해충류보다 천적류(거미류)의 발육임계온도가 낮기 때문에 쥐불놀이에 의한 천적류의 사망율이 해충류보다 높을 거승로 추정되므로 추후 대규모 시험이 필요할 것이나 현재의 입장에서 볼때 쥐불놀이가 논둑이나 제방에서 월동하는 해충류의 방제에 공헌할 것이라는 논리를 학문적으로 정당화 시키기에는 근거가 미약한 것으로 생각된다.부의 flux를 나타냈다.껍질에서만 검출되었다. $\delta_A=0.30$ 이 값은 A, B자리 모두 $Fe^{3+}$에 해당된다.라 수집하는 것이 최선의 망 운영방법이다. 자동관측시스템(AWS) 설치 시 기존의 무인감시카메라와 무선중계탑을 최대한 활용하되 무인감시카메라 설치위치$(70\siml,245m)$와 무선중계탑의 설치위치 $(299\sim1,573m)$가 산불위험지역에 포함되어 있는지의 면밀한 검토가 요구된다. 산불 등 각종 산림재난 방지와 관련한 정보를 얻을 수 있는 자동기상관측시스템(AWS)의 설치 위치는 산불발생확률모형에서 산정된 위험지역 내에 설치하는 것이 산불발생 위험지역을 판정하는데 매우 효과적일 것으로 판단된다. 기상청과 지자체가 보유하고 있는 기상관측 장비들은 대부분 도시를 중심으로 설치 운영되고 있어 산림 또는 산악에 설치된 기상관측 장비의 수는 적은 편이다. 따라서 산림과 산악에 기상관측 장비의 보강은 필수적이다. 관측망 구성은 기상청의 관측 표준(안)을 준수하며, 설치 지점의 특성에 따라 가장 경제적인 방법을 선택하는 것이 바람직하며, 특히 장비구매 설치 시 다양한 종류의 제품을 선택하는 것은 차후 장비 관리에 어려움을 겪을 소지가 있어 가능한 우수한 제품을 선택하되 동일 제품 사용을 권장한다. 따라서 위의 망구축이 이루어져 현재 기상청이 설치 운영하고 있는 측정 장비에 의해 취득한 기상자료를 공동 활용하여 표출하면 더욱 상세한 자료의 획득과 활용이 기대되어 진다. 또한, 금번 논문에서는 산불위험지역의 격자점(15km)내에 최소한 1대의 AWS 설치방안을 제시하였지만, 금후에는 15km내에서도

  • PDF

문경지역에 분포하는 변성 염기성암과 변성 퇴적암에 대한 백악기 화강암의 열변성작용

  • 오창환;김성원;김종섭
    • 암석학회지
    • /
    • 제2권2호
    • /
    • pp.74-94
    • /
    • 1993
  • 문경지역의 변성 퇴적암류와 변성 염기성암류는 북측과 서측에서 대규모로 관입한 백악기 화강암체에 의해 변성작용을 받았다. 변성 암기성암내는 광물군은 화강암체로부터 멀어지면서 각섬석+사장석, 각섬석+사장석+녹염석 그리고 각섬석+사장석+녹염석+녹니석의 광물군으로 변화한다. 이들 변성 염기성암내의 각섬석과 사장석은 변성정도와 암석성분에 따라 매우 다양한 성분의 변화를 보여준다. 변성 염기성암과 함께 산출되는 변성 퇴적암은 대체적으로 백악기 화강암의 접촉부에서 멀어질수록 천매암질 편암 그리고 천매암 혹은 점판암으로 전이한다. 변성 퇴적암의 광물군은 백악기 화강암 근처에서는 근청석+흑운모+백운모${\pm}$녹니석 혹은 홍주석+흑운모+백운모${\pm}$녹니석(근청석대)이며 접촉부에서 멀어지면서 흑운모+백운모+녹니석 광물군(흑운모대)을 거쳐 녹니석+백운모의 광물군(녹니석대)으로 전이한다. 문경지역의 변성 니질암으로부터 계산된 근청석대의 온도는 480~$580^{\circ}C$이다. 반경이 대략 4km 이상인 연구지역의 백악기 화강암의 열변성작용에 관한 이론적인 연구로부터 화강암 관입체가 주변암에 미치는 변성정도는 주로 관입체의 온도에 의해 결정되며 화성암체의 크기에 의해서는 큰 영향을 받지 않는다는 사실이 인지되었다. 문경지역의 백악기 화강암이 2km 반경내에 $500^{\circ}C$ 이상의 변성작용을 야기시킨다는 이론적인 연구결과는 문경지역의 암석학적인 연구와 잘 일치한다. 결론적으로 문경지역의 백악기 화강암은 홍주석과 근청석을 수반하는 저압접촉 변성작용을 일으켜 접촉부에서 1~2km 이내의 암석에는 각섬암상의 변성작용을 그리고 2~5km 떨어진 암석에는 녹염석-각섬암상과 녹색편암상의 변성작용을 야기시켰다. 하였다.SH 함량은 대조군에 비해 0E, 40E에서 가장 낮았으며 GSSG는 그 반대의 현상이였다. 간조직 중의 지질과 산화량은 대조군에 비해 0E, 0ES, 40E, 200E군에서 각각 6.4, 23.9, 2.1, 1.3배씩 높았으나 200ES군은 차이가 없었다. 그러므로 식이 중의 항산화제의 적절한 첨가는 납중독으로 인한 과산화적 손상과 조혈저해작용을 현저하게 완화시킬 수 있음을 알 수 있었다.중에 대한 상대중량비, 혈액요소질소와 평균 적혈구 혈색소량 등은 옥수수 투여군에 비하여 유의성 있는 변화가 관찰되었다. 이상의 결과들을 종합해 볼 때 F. monliforme MRC 826 배양물질은 랫드의 간과 신장에 독성을 나타내었고, aflatoxin $B_{1}$과 마찬가지로 간암 촉진효과가 있는 것으로 판단되었다. bead에 성공적으로 부착하여 성장하였다. 따라서 담체 내부에서 자라는 세포도 회수하여 재사용 할 수 있게 되었다.획수립과 연구방법의 표준화가 필수적으로 요구되었다. 참여기관별로 연구성적의 유의한 차이가 나타났으며 이는 조사대상자의 특성이 다름으로 하여 기인된 현상으로 해석되었다. 다양한 해외직접투자를 설명하는 데 전혀 도움이 되지못한다는 것을 의미하는 것은 아니다. 실제로 기존의 직접투자 이론은 한국 기업에 의한 개도국에의 직접 투자를 잘 설명하고 있다. 직접투자를 통하여 적정 수준의 이윤을 실현하기 위해서는 기업 특유의 우위요소를 확보하는 것이 가장 중요하므로 선진국 기업과 개도국 기업에 의한 해외 직접투자는 장기적인 관점에서 볼 때 커다란 차이를 나타내지 않는다. 본 연구가 발견한 핵 심적인 내용은 해외직접투자 기업이 조직의 내부거래를 통하여 기업특유의 우위요소 뿐단 아니라 국가적 비교 우위 요소를 동시에 피투자국으로 이전한다는 사실이다.

  • PDF

사질토에 설치된 강성현장타설말뚝의 극한수평지지력 예측에 관한 재고 (A Review on Ultimate Lateral Capacity Prediction of Rigid Drilled Shafts Installed in Sand)

  • 조남준
    • 한국지반공학회논문집
    • /
    • 제21권2호
    • /
    • pp.113-120
    • /
    • 2005
  • 수평하중을 받는 현장타설말뚝을 합리적이고 경제적으로 설계하기 위해서 가장 중요한 것은 지구조 사이의 상호작용을 이해하는 것이다. 그러나 지난 수십년 동안 수평하중을 받는 깊은 기초의 거동에 대한 많은 연구가 있었음에도 불구하고, 문제의 성격상 삼차원적이며 비대칭성으로 인하여 더해지는 지반고유의 비선형성, 불균일성, 복잡성 때문에 극한수평지지력을 공식화하기란 매우 어렵다 본 연구에서는 특정한 현장조건, 기초의 기하학적 특성(D/B비),하중조건 등에 따른 많은 설계 방법들 중에서 가장 널리 알려진 네 가지의 방법(즉, Reese, Broms, Hansen, 그리고 Davidson)에 대해서 재검토하였다. 그리고 본 연구의 밀환으로 행한 모형실험으로 얻어진 하중-변위곡선을 쌍곡선으로 변환하여 해석된 방곡선수평지지력(H$_h$)과 위의 네 가지 방법들에 의하여 예측되는 극한수평지지력(H$_u$)을 비교하였다. Reese와 Hansen의 방법에 의해 구한 H$_u$ / H$_h$비는 각각 0.966와 1.015로서 실험결과와 매우 근사한 극한수평지지력을 제시하고 있다. 반면에 Davidson의 방법에 의해 구한 H$_u$는 에 비하여 $30\%$ 가량 큰 것으로 예측하고 있으나 네 가지 방법중에서 예측 수평지지력값에 대한 C.O.V.가 가장 작다. 네 가지 방법 중 가장 단순한 Broms의 방법은 H$_u$/ H$_h$: 0.896으로서 네 방법 중에서 극한 수평지지력을 가장 작게 평가하는 것으로 나타나지만 극한수평지지력값을 예측함에 있어서 가장 작은 S.D.를 보인다. 결론적으로, 네 가지의 방법 중 그 어 것도 극한수평지지력을 정확하게 예측한다는 면에서 다른 방법보다 더 우수하다고 할 수는 없다. 또한, 계산과정이 얼마나 정교하거나 복잡한 것과는 상관없이 극한수평지지력을 예측하는데 있어서 신뢰도는 또 다론 문제인 것 같다.

Effects of Partial or Total Replacement of Maize with Alternative Feed Source on Digestibility, Growth Performance, Blood Metabolites and Economics in Limousin Crossbred Cattle

  • Shi, F.H.;Fang, L.;Meng, Q.X.;Wu, H.;Du, J.P.;Xie, X.X.;Ren, L.P.;Zhou, Z.M.;Zhou, B.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제27권10호
    • /
    • pp.1443-1451
    • /
    • 2014
  • Increasing cost and scarcity of maize has stimulated the use of alternative feed sources (AFS) in the diets of cattle. In this study, we investigated the effects of partial or total replacement of maize on nutrient digestibility, growth performance, blood metabolites, and economics in Limousin crossbred feedlot cattle. Forty-five $Limousin{\times}Luxi$ crossbred bulls were randomly assigned to the three treatment groups, orthodox diet (OD; 45.0% maize), partial replacement diet (PRD; 15% maize, 67% AFS), total replacement diet (TRD; 0% maize, 100% AFS). The growth feeding trial lasted for 98 days. Dry matter intake (DMI) and average daily gain (ADG) were recorded. The digestion trial was carried out after the end of the growth trial. Total faeces and feed samples were measured daily. Digestibilities of dry matter (DM) and organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF) were calculated. After the feeding trial, blood metabolites were measured in 12 animals from each group. Initial and final body weights did not differ significantly among treatment groups (p>0.05). The ADG and DMI were 1.72 and 8.66, 1.60 and 9.10, and 1.40 and 9.11 kg/d for OD, PRD, and TRD, respectively. The PRD and TRD exhibited lower ADG (p<0.01) and higher DMI (p<0.01) than OD. The DMI (%body weight) was comparable between groups (p>0.5). Feed efficiency of PRD and TRD were lower than OD (p<0.01). The DM digestibility decreased with reduced level of maize (p = 0.10), OM digestibility was higher in OD (p<0.05), and CP, NDF and ADF digestibilities were similar for all groups (p>0.05). Blood urea nitrogen (mg/dL) in PRD and TRD was higher than OD (p<0.01), while other blood parameters did not differ significantly. Feed costs ($/head/d) were 1.49, 0.98, and 0.72 for OD, PRD, and TRD, respectively (p<0.01). Feed costs per kg gain ($) were significantly lower for PRD (0.63) and TRD (0.54) than OD (0.89; p<0.01). Overall profit ($/head) and daily profit ($/head/d) did not differ significantly between treatments (p>0.05), although TRD showed the highest economic benefits overall (p<0.01). While a traditional diet maximized the growth rate, partial or total replacement of dietary maize with AFS proved economically feasible due to their lower costs and comparable nutrient digestibilities of DM, CP, NDF, and ADF. Partial replacement may prove economically competitive in the current situation of China.

유전공학기법으로 변형시킨 내성유전자네 대한 수질환경에서의 전이동태

  • 이성기;김치경
    • 미생물학회지
    • /
    • 제30권4호
    • /
    • pp.322-331
    • /
    • 1992
  • 수질환경에서 일어나는 GEM 균주의 항생물질내성유전자의 전이동태를 연구하기 위하여, $Km^{r}$ plasmid 의 conjugation을 실시하였다. 그 결과 conjugant 들에 나타나는 plasmid 의 재배열을 agarose gel 에서 비교분석하였고, DNA probe 유전자의 행방을 추구하였다. GMM 균주들 (DKC600 과 DKC601) 의 $Km^{r}$유전자는 자연계 분리균주(DK1) 보다 더 높은 전이율이 나타났으나, recipient 에 따라 다소 차이가 있었다. Conjugant 들에서 나타나는 plasmid 의 재배열도 donor가 GMM 균주에서 전이된 plasmid 들은 특이하게 그 분자량이 커졌다. LB 에서 수온이 10.deg.C 보다는 25.deg.C 이상 그리고 pH 가 9 에서 5에 가까울수록$Km^{r}$ 유전자는 더 많이 전이되었으나, FW 에서는 수온과 pH 에 의한 영향이 거의 없었다. 또 FW 에서는 GMM 균주의 conjugant 들에서 chromosome 이외에 plasmid 가 거의 발견되지 않았다. 이와 같이 plasmid 들이 다양하게 재배열된 conjugant 들에서 Southern analysis 에 의하여 $Km^{r}$ 유전자의 행방을 알아본 결과, LB 에서는 DK1 뿐만 아니라 GMM 균주들의 $Km^{r}$ plasmid 가 전이된후 그대로 존재하였다. 그러나 FW 의 수질환경에서는 donor 의 $Km^{r}$ plasmid / 는 없어지고 chromosome 에서 hybridization signal 이 나타났다. 또 FW 에서는 donor 가 DK1 일 경우 pDK101 은 수온과 pH 의 영향없이 pDK101 이 그대로 전이되었다. 그러므로 LB 나 AW 에서는 DK1 뿐만 아니라 GMM 규주들의 Km$^{r}$ plasmid 가 전이된후 conjugant 에 그대로 존재하였고 기타의 plasmid 들이 다양하게 재배열되었지만, FW 수질환경에서는 DKC600 의 $Km^{r}$ 유전자가 수온이나 pH 에 상관없이 chromosome 에 integration 되었다.

  • PDF

자동취형기 개발을 위한 설계 및 제작 (Design and Fabrication for the Development of Auto Pattern Maker)

  • 이영일;김정희;박지현
    • 한국안광학회지
    • /
    • 제18권3호
    • /
    • pp.231-239
    • /
    • 2013
  • 목적: 안경테의 형판제작을 위한 자동취형기 개발을 위해 설계하고 제작하고자 한다. 방법: 자동취형기의 주요 설계도를 캐드로 그려서 제작에 필요한 정보를 얻었다. 이 데이터를 기본으로 자동취형기 개발을 위해 시제품을 제작하였다. 결과: 자동취형기는 형판가공부, 조작판넬, 안경테장착부, 탐침자부로 구성되었다. 형판가공부는 절삭부, 플라스틱 형판 고정부, 형판 이탈핀 그리고 형판 절삭시 소음을 최소화시키기 위한 방음덮개로 구성하였다. 조작판넬은 메인 P.C.B.와 서로 연결 및 작동되게 설계하였다. 탐침자가 $1.8^{\circ}$ 각도로 안경테 삽입부를 스캐닝해서 얻은 좌표값에 대한 엔코딩한 값을 통해 삽입부의 정보를 얻게 되었다. 스캐닝이 시작된 후에는 오른쪽 방향과 왼쪽방향으로 작동된다. 통신연결부는 RS232C 전송방식으로 자동취형기에서 외부 장치로 안경테 렌즈삽입부의 정보를 전송하여 형판 없이도 안경렌즈를 가공할 수 있었다. 형판의 절삭치수의 오차율을 평가하기 위해 일원배치분산분석한 결과 F값과 P값은 0.510과 0.601로 나와서, 자동 취형기에서 가공된 형판의 ${\Phi}22mm$, ${\Phi}55mm$ 그리고 ${\Phi}62mm$ 절삭 치수의 오차율은 크기에 따라 차이가 없는 것으로 나타났다. 또한, 개발된 자동취형기의 평균 절삭 오차값은 0.0274 mm으로 나타났다. 결론: 자동취형기를 설계 및 제작하여 시제품 제작에 성공하였다. 자동취형기의 역할은 안경테를 측정하여 안경테에 맞는 정확한 렌즈삽입부의 크기를 얻는 것이다. 자동취형기로부터 얻어진 정보값은 외부장치로 보내져 형판 없이 안경렌즈를 연삭가공 한다. 또한, 시제품은 안경테에 맞는 형판을 만들 수 있다. 연구개발 된 시제품을 통해 안경사들이 편리하게 형판제작이 가능하고, 과거 보다 안경 조제가공이 보다 효율적이게 작업이 이루어질 수 있을 것으로 예상된다.

유사도 알고리즘을 활용한 시맨틱 프로세스 검색방안 (Semantic Process Retrieval with Similarity Algorithms)

  • 이홍주
    • Asia pacific journal of information systems
    • /
    • 제18권1호
    • /
    • pp.79-96
    • /
    • 2008
  • One of the roles of the Semantic Web services is to execute dynamic intra-organizational services including the integration and interoperation of business processes. Since different organizations design their processes differently, the retrieval of similar semantic business processes is necessary in order to support inter-organizational collaborations. Most approaches for finding services that have certain features and support certain business processes have relied on some type of logical reasoning and exact matching. This paper presents our approach of using imprecise matching for expanding results from an exact matching engine to query the OWL(Web Ontology Language) MIT Process Handbook. MIT Process Handbook is an electronic repository of best-practice business processes. The Handbook is intended to help people: (1) redesigning organizational processes, (2) inventing new processes, and (3) sharing ideas about organizational practices. In order to use the MIT Process Handbook for process retrieval experiments, we had to export it into an OWL-based format. We model the Process Handbook meta-model in OWL and export the processes in the Handbook as instances of the meta-model. Next, we need to find a sizable number of queries and their corresponding correct answers in the Process Handbook. Many previous studies devised artificial dataset composed of randomly generated numbers without real meaning and used subjective ratings for correct answers and similarity values between processes. To generate a semantic-preserving test data set, we create 20 variants for each target process that are syntactically different but semantically equivalent using mutation operators. These variants represent the correct answers of the target process. We devise diverse similarity algorithms based on values of process attributes and structures of business processes. We use simple similarity algorithms for text retrieval such as TF-IDF and Levenshtein edit distance to devise our approaches, and utilize tree edit distance measure because semantic processes are appeared to have a graph structure. Also, we design similarity algorithms considering similarity of process structure such as part process, goal, and exception. Since we can identify relationships between semantic process and its subcomponents, this information can be utilized for calculating similarities between processes. Dice's coefficient and Jaccard similarity measures are utilized to calculate portion of overlaps between processes in diverse ways. We perform retrieval experiments to compare the performance of the devised similarity algorithms. We measure the retrieval performance in terms of precision, recall and F measure? the harmonic mean of precision and recall. The tree edit distance shows the poorest performance in terms of all measures. TF-IDF and the method incorporating TF-IDF measure and Levenshtein edit distance show better performances than other devised methods. These two measures are focused on similarity between name and descriptions of process. In addition, we calculate rank correlation coefficient, Kendall's tau b, between the number of process mutations and ranking of similarity values among the mutation sets. In this experiment, similarity measures based on process structure, such as Dice's, Jaccard, and derivatives of these measures, show greater coefficient than measures based on values of process attributes. However, the Lev-TFIDF-JaccardAll measure considering process structure and attributes' values together shows reasonably better performances in these two experiments. For retrieving semantic process, we can think that it's better to consider diverse aspects of process similarity such as process structure and values of process attributes. We generate semantic process data and its dataset for retrieval experiment from MIT Process Handbook repository. We suggest imprecise query algorithms that expand retrieval results from exact matching engine such as SPARQL, and compare the retrieval performances of the similarity algorithms. For the limitations and future work, we need to perform experiments with other dataset from other domain. And, since there are many similarity values from diverse measures, we may find better ways to identify relevant processes by applying these values simultaneously.

탁주 양조중 Thiamin의 소장에 관한 연구 (Studies on the quantitative changes of thiamin during Takju brewing)

  • 김찬조;최우영
    • Applied Biological Chemistry
    • /
    • 제13권1호
    • /
    • pp.105-109
    • /
    • 1970
  • 탁주 양조에 사용되는 각종원료중의 Thiamin과 쌀, 소맥분 및 옥수수분을 주원료로 일반 탁주양조법에 따라 담금하여 숙성시까지 술덧중의 Thiamin의 소장을 측정하여 다음과 같은 결과를 얻었다. 1. 각원료 100g중의 Thiamin 함량 $({\gamma})$은 쌀 107.8 소맥 분 185.0 옥수수분 410.2 누룩 347.4 소맥분입곡 170.1 옥수수분입곡 257.,3 이었으며 쌀, 소맥분 및 옥수수분중의 함량은 증자에 의하여 $40{\sim}50%$ 파괴됨을 보였다. 2. 쌀, 소맥분 및 옥수수분을 주원료로 하여 각각 담금한 술덧에서 Thiamin의 소장은 각 술덧에서 같은 경향을 보여 누룩단용법의 양구에서 담금 후 1, 2일 사이에 급격히 감소하며 이후 숙성시까지 큰 변동이 없었고 입곡혼용법의 양구에서는 담금초기에 누룩단용법구들에 비하여 감소율이 훨씬 적었다. 또한 각 숙성 술덧 100ml중의 함량은 누룩단용법의 쌀구에서 약 6${\gamma}$, 소맥분구에서 7.5${\gamma}$였고 입곡혼용법의 소맥분구에서 약 $12,4{\gamma}$, 옥수수분구에 서 15.4 ${\gamma}$ 였다. 3. 각숙성 술덧으로 제성한 탁주 100ml중에는 Thiamin이 누룩단용구들에서 $2.4{\sim}3.5{\gamma}$, 입곡혼용법구들에서 약 $5{\sim}7{\gamma}$ 함유됨을 알 수 있었다. 4. 각숙성 술덧의 지게미 100g중에는 Thiamin이 누룩단용법의 쌀구에서 약 $43.7{\gamma}$, 소맥분구에서 $56.1{\gamma}$ 그리고 입곡혼용법의 소맥분구에서 약 $57.5{\gamma}$. 옥수수분구에서 $81.4{\gamma}$ 함유되었다.

  • PDF