• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.2
• /
• pp.165-176
• /
• 1994

This study was carried out to investigate the effect of the timing and dose of human chorionic gonadotropin(hCG) on oocyte recovery, in vitro fertilization, and preimplantation development in superovulation of mouse. F1 hybrid($C57BL{\times}CBA$) mice were obtained and superovulation was induced in female mice by sequential intraperitoneal injection of PMSG and hCG. In the first series of experiments, mice received 5 IU of PMSG given intraperitoneally, and 48 hours later were injected 1 IU, 5 IU, or 10 IU of hCG respectively. In the second series of experiments, mice received 5 IU of PMSG given intraperitoneally and were injected 5IU of hCG 36, 48, or 60 hours later respectively. 1. When the mice received 5 IU of PMSG given intraperitoneally and 48 hours later were injected 1 ItT, 5 IU, or 10 IU of hCG respectively, there were no differences in the total number of the oocytes obtained from the three experimental groups. When the cultures were examined 48 hrs after the termination of insemination the proportion of unfragmented oocytes which had developed over two-cell stage was observer to be lowest in 10 IU hCG group. When the cultrues were examined 120 hour after termination of insemination the proportion of embryos which had developed to the blastocyst stage was observed to be significantly higher in 10IU hCG group than 5IU hCG group(p<0.05), but there was no difference between 10 IU hCG group and 1IU hCG group. 2. When the mice received 5 IU of PMSG and were injected 5 IU of hCG 36, 48, or 60 hours later respectively, there were no differences in the total number of oocytes obtained from the three experimental groups. When cultures were examined 48 hour after the termination of insemination the proportion of unfragmented oocytes which had developed over two-cell stage was observed to be significantly lower in 36 hour interval group than 48 hour interval and 60 hour interval group(p<0.05). When the cultures were examined 120 hour after termination of insemination the proportion of embryos which had developed to the blastocyst stage was found to be higher in 60 hour interval group than 36 interval or 48 hour interval group (P<0.05), and the proportion of hatching blastocyst was found to be higher in 60 hour interval group as well. In this study, it was concluded that the administration of adequate dose of hCG, and long (60 hour) PMSG-hCG interval were necessary in superovulation of mice($C57BL{\times}CBA$) in order to get a large number of oocytes which had an early oocytes which had an early embryonic developmental capability when fertilized in vitro, and especially it had better have been avoided to administer a large dose of hCG.

• Korean journal of applied entomology
• /
• v.29 no.3
• /
• pp.209-215
• /
• 1990

Some preliminary studies were conducted to find out whether the levee-burning could justifiable for the suppression of insect pests, particularly the smaller brown planthopper (Laodelphax striatellus F.). Density surveys on pests and their enemies (mostly spiders) were carried out upto the mid May at an experimental paddy field located in Suwon after of it's levee $(72\times1m)$ was burned on Feb. 20, 1987. Results were discussed in relation to density recovering of both pests and their possible enemies (spiders) and summarized as below. Not a single individual of any pest or enemy was found from the levee upto sometime after the levee-burning. Grasses started to grow more vigorously in burned ares than in unburned upto about 60 days after the burning. And densities of both pest and enemies grew higher in burned areas than in unburned from about 75 days after the burning (in Early may). It is suspected that all individuals of pests and enemies fond from the burned areas could have immigrated from the surrounding areas. If levee-burning was carried out in much wider areas, much longer time would be needed to recover the density of both pests and enemies to the center region of the burning. Wingless spiders would require even longer time than winged pest species to re-establish in the center region of the widely burned field. Pirata subpiraticus, the most abundant spider species in Korean paddy fields, starts to move about and searches for food at above $9^{\circ}C$ which is somewhat lower than the critical temperature for the pest species. Thus P. subpiraticus would require more food than other pest species early in the spring, and therefore, it would have lower probability to survive than pest species particularly in burned areas. Experiments for pest suppression with levee-burning would better be carried on in much wider areas, and its justification seems to be discussed after man other disciplines related to both pests and their natural enemies were throughly studied together with their density surveys. However, according to the present point of vie, the opinion that levee-burning is helpful for controlling pests which over winter on levee areas could not be justifiable.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.2
• /
• pp.74-94
• /
• 1993

Metabasites and metapelites in the Mungyong area were intruded by Cretaceous granites with radius of 4-8 km. As the distance from granite body increases, the mineral assemblage of metabasite changes from amphibole + plagioclase through amphibole + plagioclase + epidote to amphibole + plagioclase + epidote + chlorite. The compositional variations of amphibole and plagioclase according to the change of metamorphic grade and bulk rock compositions are very complex. Towards the Mungyong Cretaceous granite body, the mineral assemblage of metapelite changes from chlorite+ muscovite(ch1orite zone) through biotite + chlorite + muscovite(biotite zone) to andalusite+biotite + muscovite${\pm}$chlorite or cordierite+ biotite+ muscovite${\pm}$chlorite(cordierite zone). The estimated metamorphic conditions of cordierite zone are 480~$580^{\circ}C$ 1.5-3.3 kb. The theoretical study on the thermal metamorphism caused by the Cretaceous granite with radius longer than 4 km in the Mungyong area suggests the followings: The degree of metamorphism is mainly determined not by the size of granite body but by the temperature of granite intrusion; The country rocks within 2 km from Cretaceous granite have undergone metamorphism with temperature higher than $500^{\circ}C$, which is consistent with the petrological study in the Mungyong area. Mungyong Cretaceous granite caused a low P/T thermal metamorphism to the country rocks; the amphibolite facies metamorphism to the country rocks within 1-2 km from the granite body and the epidote-amphibolite and greenschist facies metamorphism to the country rocks within 2-5 km.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.113-120
• /
• 2005

An understanding of soil-structure interaction is the key to rational and economical design for laterally loaded drilled shafts. It is very difficult to formulate the ultimate lateral capacity into a general equation because of the inherent soil nonlincarity, nonhomogeneity, and complexity enhanced by the three dimensional and asymmetric nature of the problem though extensive research works on the behavior of deep foundations subjected to lateral loads have been conducted for several decades. This study reviews the four most well known methods (i.e., Reese, Broms, Hansen, and Davidson) among many design methods according to the specific site conditions, the drilled shaft geometric characteristics (D/B ratios), and the loading conditions. And the hyperbolic lateral capacities (H$_h$) interpreted by the hyperbolic transformation of the load-displacement curves obtained from model tests carried out as a part of this research have been compared with the ultimate lateral capacities (Hu) predicted by the four methods. The H$_u$ / H$_h$ ratios from Reese's and Hansen's methods are 0.966 and 1.015, respectively, which shows both the two methods yield results very close to the test results. Whereas the H$_u$ predicted by Davidson's method is larger than H$_h$ by about $30\%$, the C.0.V. of the predicted lateral capacities by Davidson is the smallest among the four. Broms' method, the simplest among the few methods, gives H$_u$ / H$_h$ : 0.896, which estimates the ultimate lateral capacity smaller than the others because some other resisting sources against lateral loading are neglected in this method. But it results in one of the most reliable methods with the smallest S.D. in predicting the ultimate lateral capacity. Conclusively, none of the four can be superior to the others in a sense of the accuracy of predicting the ultimate lateral capacity. Also, regardless of how sophisticated or complicated the calculating procedures are, the reliability in the lateral capacity predictions seems to be a different issue.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.10
• /
• pp.1443-1451
• /
• 2014

Increasing cost and scarcity of maize has stimulated the use of alternative feed sources (AFS) in the diets of cattle. In this study, we investigated the effects of partial or total replacement of maize on nutrient digestibility, growth performance, blood metabolites, and economics in Limousin crossbred feedlot cattle. Forty-five $Limousin{\times}Luxi$ crossbred bulls were randomly assigned to the three treatment groups, orthodox diet (OD; 45.0% maize), partial replacement diet (PRD; 15% maize, 67% AFS), total replacement diet (TRD; 0% maize, 100% AFS). The growth feeding trial lasted for 98 days. Dry matter intake (DMI) and average daily gain (ADG) were recorded. The digestion trial was carried out after the end of the growth trial. Total faeces and feed samples were measured daily. Digestibilities of dry matter (DM) and organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF) were calculated. After the feeding trial, blood metabolites were measured in 12 animals from each group. Initial and final body weights did not differ significantly among treatment groups (p>0.05). The ADG and DMI were 1.72 and 8.66, 1.60 and 9.10, and 1.40 and 9.11 kg/d for OD, PRD, and TRD, respectively. The PRD and TRD exhibited lower ADG (p<0.01) and higher DMI (p<0.01) than OD. The DMI (%body weight) was comparable between groups (p>0.5). Feed efficiency of PRD and TRD were lower than OD (p<0.01). The DM digestibility decreased with reduced level of maize (p = 0.10), OM digestibility was higher in OD (p<0.05), and CP, NDF and ADF digestibilities were similar for all groups (p>0.05). Blood urea nitrogen (mg/dL) in PRD and TRD was higher than OD (p<0.01), while other blood parameters did not differ significantly. Feed costs ($/head/d) were 1.49, 0.98, and 0.72 for OD, PRD, and TRD, respectively (p<0.01). Feed costs per kg gain ($) were significantly lower for PRD (0.63) and TRD (0.54) than OD (0.89; p<0.01). Overall profit ($/head) and daily profit ($/head/d) did not differ significantly between treatments (p>0.05), although TRD showed the highest economic benefits overall (p<0.01). While a traditional diet maximized the growth rate, partial or total replacement of dietary maize with AFS proved economically feasible due to their lower costs and comparable nutrient digestibilities of DM, CP, NDF, and ADF. Partial replacement may prove economically competitive in the current situation of China.

• Korean Journal of Microbiology
• /
• v.30 no.4
• /
• pp.322-331
• /
• 1992

In order to understand the transfer and behavior of R gene in water environments. the Kmr gene in the genetically modified microorganisms(GMMs) w,is studied by conjugation. The plasmid variously rearranged in the conjugants were comparatively analyzied by agarosc gel electrophoresis and the specific Km' genes in the gel were tletected with DNA probe. The Kmr genes of the GMM strains(DKC600 and DKC601) were transferred at higher rate than those of natural isola~e(DKI)b, ut the ratc was a little diflurent depending upon the recipient strains. Rearrangement of the plasmids appeared morc drastic in GMM strains than in IIKI as donor. The transfer frequencies of the Km' genes in LR broth were remarkably higher than in the water of AW and FW without regards to the strains. In LA breth. the frequencies of Kmr genes were higher at 25'C-30$^{\circ}$C than at 10$^{\circ}$C and at pH - 7 than pH 9, but temperature and pH of the FW did n,,t affect to the frequency. And the conjugants from GMM strains in FW did not showed any plasmids. except tor 43 kb plasmiil. As results of Southern analysis of the plasmid, variously rearranged in eonjugant cells obtained in LB broth, the Kmr genes were detected at the same position of Km' plasrnids of the donor cell(DK1 and GMM strains). But Km' plasmid disappeared in the conjugants obtained in F'W and their chronlosomes showed strong signal of hybridization. The Kmr plasmid of DKl in the conjugants obtained in FW water was transferred and maintained its size, but the Kmr plasinids of the GMM strains were all integrated into chromosome. Therefore, the Kmr plasmids of DKI anit GMM strains in LH were intactly transferred and other plasmitls were variously rearranged. but Km' gene of DKC600 in FW water was integrated into the chromosorn: without regards to the temperature and pH of the water.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• Asia pacific journal of information systems
• /
• v.18 no.1
• /
• pp.79-96
• /
• 2008

One of the roles of the Semantic Web services is to execute dynamic intra-organizational services including the integration and interoperation of business processes. Since different organizations design their processes differently, the retrieval of similar semantic business processes is necessary in order to support inter-organizational collaborations. Most approaches for finding services that have certain features and support certain business processes have relied on some type of logical reasoning and exact matching. This paper presents our approach of using imprecise matching for expanding results from an exact matching engine to query the OWL(Web Ontology Language) MIT Process Handbook. MIT Process Handbook is an electronic repository of best-practice business processes. The Handbook is intended to help people: (1) redesigning organizational processes, (2) inventing new processes, and (3) sharing ideas about organizational practices. In order to use the MIT Process Handbook for process retrieval experiments, we had to export it into an OWL-based format. We model the Process Handbook meta-model in OWL and export the processes in the Handbook as instances of the meta-model. Next, we need to find a sizable number of queries and their corresponding correct answers in the Process Handbook. Many previous studies devised artificial dataset composed of randomly generated numbers without real meaning and used subjective ratings for correct answers and similarity values between processes. To generate a semantic-preserving test data set, we create 20 variants for each target process that are syntactically different but semantically equivalent using mutation operators. These variants represent the correct answers of the target process. We devise diverse similarity algorithms based on values of process attributes and structures of business processes. We use simple similarity algorithms for text retrieval such as TF-IDF and Levenshtein edit distance to devise our approaches, and utilize tree edit distance measure because semantic processes are appeared to have a graph structure. Also, we design similarity algorithms considering similarity of process structure such as part process, goal, and exception. Since we can identify relationships between semantic process and its subcomponents, this information can be utilized for calculating similarities between processes. Dice's coefficient and Jaccard similarity measures are utilized to calculate portion of overlaps between processes in diverse ways. We perform retrieval experiments to compare the performance of the devised similarity algorithms. We measure the retrieval performance in terms of precision, recall and F measure? the harmonic mean of precision and recall. The tree edit distance shows the poorest performance in terms of all measures. TF-IDF and the method incorporating TF-IDF measure and Levenshtein edit distance show better performances than other devised methods. These two measures are focused on similarity between name and descriptions of process. In addition, we calculate rank correlation coefficient, Kendall's tau b, between the number of process mutations and ranking of similarity values among the mutation sets. In this experiment, similarity measures based on process structure, such as Dice's, Jaccard, and derivatives of these measures, show greater coefficient than measures based on values of process attributes. However, the Lev-TFIDF-JaccardAll measure considering process structure and attributes' values together shows reasonably better performances in these two experiments. For retrieving semantic process, we can think that it's better to consider diverse aspects of process similarity such as process structure and values of process attributes. We generate semantic process data and its dataset for retrieval experiment from MIT Process Handbook repository. We suggest imprecise query algorithms that expand retrieval results from exact matching engine such as SPARQL, and compare the retrieval performances of the similarity algorithms. For the limitations and future work, we need to perform experiments with other dataset from other domain. And, since there are many similarity values from diverse measures, we may find better ways to identify relevant processes by applying these values simultaneously.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.105-109
• /
• 1970

Thiamin in the various materials which used for Takja braving was determined and its quantitative changes in the Takju mashes which were mashed with polished rice and wheat flour respectively using Nuruk only for the enzyme source, and with wheat flour and corn powder respectively using Nuruk and Koji, were checked at 24 hours intervals during the whole brewing period. The results obtained were as follows. a) The thiamin contents in 100 grams of each materials were: Polished rice 107.8${\gamma}$ Wheat Pour 185.0${\gamma}$ Corn powder 410.2${\gamma}$ Nuruk 347.4${\gamma}$ Koji of wheat flour 170.1${\gamma}$ Koji of corn powder 257.3${\gamma}$ b) About 40 to 50 percent of thiamin in the polished rice, wheat flour and, corn powder were losed by steaming at 10 wounds for 50 minutes. c) The quantitative changes of thiamin in the Takju meshes showed a similar tendency. Thiamin contents were decreased markedly during 2 days after mashing but thereafter, almost unchanged till the mashes were ripened. Its decreasing rates in tile two plots uses Nuruk and Koji wereless thaw those in the two plots used Nuruk only. d) Approximately 6${\gamma}$ of thiamin was determined in 100 ml. of the ripened mash of the rice plot and 7.5${\gamma}$ in tire whet flour plot in the case of using Nuruk only. 12.4${\gamma}$ of thiamin was determined in 100 ml. of the ripened mash of the wheat flour plot and 15.4${\gamma}$in the corn powder plot in the case of using Nuruk and Koji. e) It was assumed that 2.4 to 3.5${\gamma}$ of thiamin were contained in 100 ml. of finished Takju of the two plots used Nuruk only and 5 to 7${\gamma}$ in the two plots used Nuruk and Koji. f) About 43.7${\gamma}$ of thiamin were determined in 100 grams of Takju cake of the rice plot and 56.1${\gamma}$ in the wheat flour plat used Nuruk only, and 81.4${\gamma}$ in the corn powder plot and 57.7${\gamma}$ in the wheat flour plot used Nuruk and Koji.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.4
• /
• pp.548-559
• /
• 1996

A series of performance measurements of positron emission tomography (PET) were performed following the recommendations of the Computer and Instrumentation Council of the Society of Nuclear Medicine and the National Electrical Manufacturers Association. We investigated the performance of the General Electric $Advance^{TM}$ PET. The measurements include the basic intrinsic tests of spatial resolution, scatter fraction, sensitivity, and count rate losses and randoms. They also include the tests of the accuracy of corrections: count rate linearity correction, uniformity correction, scatter correction and attenuation correction. GE $Advance^{TM}$ PET has bismuth germanate oxide crystals (4.0mm transaxial ${\times}$ 8.1mm axial ${\times}$ 30.0mm radial) in 18 rings, which form 35 imaging planes spaced by 4.25mm. The system has retractable tungsten septa 1mm thick and 12cm long. Transaxial resolution was 4.92mm FWHM in 2D and 5.14mm FWHM in 3D at the center. Average axial resolution in 2D decreased from 3.91mm FWHM at the center to 6.49mm FWHM at R=20cm. Average scatter fraction of direct and cross slices was 9.57%. Dead-time losses of 50% corresponded to a radioactivity concentration of $4.86{\mu}Ci/cc$ and a true count rate of 519 kcps in 2D. The accuracy of count rate linearity correction was 1.84% at the activity of $4.50{\mu}Ci/cc$. Non-uniformity was 2.06% in 2D and 2.93% in 3D. Remnant errors after scatter correction were 0.55% in 2D and 4.12% in 3D. The errors of attenuation correction were 6.21% (air), 0.20% (water), -6.32% (teflon) in 2D and 5.00% (air), 6.94% (water), 3.01% (teflon) in 3D. The results indicate the performance of GE $Advance^{TM}$ PET scanner to be well suited for clinical and research applications.