• 한국안광학회지
• /
• 제19권3호
• /
• pp.403-406
• /
• 2014

목적: 울산지역의 안질환 발생환자에 있어서 연령별에 따른 특정질환을 알아보고자 하였다. 방법: 울산지역의 안과병원을 내원한 환자 300명을 대상으로 환자의 성별, 초진당시 연령, 과거력, 진단명 등을 기준으로 분석하였다. 결과: 10대의 경우에는 각막염이 가장 많은 비중을 차지하였고, 20대는 건조증과 각막염, 30대는 콩다래끼와 결막염, 40~50대의 경우에는 결막염, 60대의 경우에는 결막염과 백내장이 많은 비중을 차지하는 것으로 나타났다. 결론: 주요 안질환 원인으로는 10~20대는 콘택트렌즈의 부적절한 착용과 스마트폰과 컴퓨터 매체 등의 장기간 사용, 30~50대는 알러지성 결막염이나 화학물질 등으로 인한 반응 등 여러 가지 요인으로 분석되는데 특히, 공업지역의 특성상 타지역 보다 결막염의 발생빈도가 더 높게 나타났으며, 50대 중반부터 60대 이상은 일종의 노화현상이 원인인 것으로 분석되어진다. 따라서, 본 연구결과는 울산지역에서 발생될 수 있는 안질환 예방을 위한 기초 자료로 활용될 수 있을 것으로 여겨진다.

• 한국안광학회지
• /
• 제12권3호
• /
• pp.27-33
• /
• 2007

구면과 비구면 R.G.P 렌즈 착용실태 조사를 인천 경기지역 안경사 374명을 대상으로 착용비율, 관리법, 예비검사법등 여러가지 문항을 설정하여 조사 하였다. 대부분의 안경사들은 비구면 R.G.P 렌즈를 구면보다 7:3의 비율로 많이 판매하고 있었으며 R.G.P 렌즈 핏팅시 반드시 행하여야할 예비검사 항목 Schirmer test, Tear Break up time test, Slit lamp에 의한 Fluorescein검사, Topography에 의한 각막 지형도 검사를 시행하는지 조사하였으나 대부분 시행하지 않고 있었다. 또한 R.G.P 렌즈 핏팅시 가장 많이 나타나는 증상으로는 가벼운 이물감, 충혈, 시력 흐림, 건조감 순으로 나타났다. 본 실태 조사는 이상적인 R.G.P 렌즈를 핏팅을 위하여 반드시 행하여야 할 예비검사 항목을 나열하였으며, 그 중요성을 일깨우고자 하는데 목적이 있다.

• Parasites, Hosts and Diseases
• /
• 제46권3호
• /
• pp.157-164
• /
• 2008

Three Acanthamoeba isolates (KA/E9, KA/E17, and KA/E23) from patients with keratitis were identified as Acanthamoeba triangularis by analysis of their molecular characteristics, a species not previously recognized to be a corneal pathogen. Epidemiologic significance of A. triangularis as a keratopathogen in Korea has been discussed. Morphologic features of Acanthamoeba cysts were examined under a microscope with differential interference contrast (DIC) optics. Mitochondrial DNA (mtDNA) of the ocular isolates KA/E9, KA/E17, and KA/E23 were digested with restriction enzymes, and the restriction patterns were compared with those of reference strains. Complete nuclear 188 and mitochondrial (mt) 16S rDNA sequences were subjected to phylogenetic analysis and species identification. mtDNA RFLP of 3 isolates showed very similar patterns to those of SH621, the type strain of A. triangularis. 16S and 18S rDNA sequence analysis confirmed 3 isolates to be A. triangularis. 18S rDNA sequence differences of the isolates were 1.3% to 1.6% and those of 16S rDNA, 0.4% to 0.9% from A. triangularis SH621. To the best of our knowledge, this is the first report, confirmed by 18S and 16S rDNA sequence analysis, of keratitis caused by A. triangularis of which the type strain was isolated from human feces. Six isolates of A. triangularis had been reported from contaminated contact lens cases in southeastern Korea.

• 로봇학회논문지
• /
• 제3권4호
• /
• pp.270-277
• /
• 2008

The development of a face robot basically targets very natural human-robot interaction (HRI), especially emotional interaction. So does a face robot introduced in this paper, named Buddy. Since Buddy was developed for a mobile service robot, it doesn't have a living-being like face such as human's or animal's, but a typically robot-like face with hard skin, which maybe suitable for mass production. Besides, its structure and mechanism should be simple and its production cost also should be low enough. This paper introduces the mechanisms and functions of mobile face robot named Buddy which can take on natural and precise facial expressions and make dynamic gestures driven by one laptop PC. Buddy also can perform lip-sync, eye-contact, face-tracking for lifelike interaction. By adopting a customized emotional reaction decision model, Buddy can create own personality, emotion and motive using various sensor data input. Based on this model, Buddy can interact probably with users and perform real-time learning using personality factors. The interaction performance of Buddy is successfully demonstrated by experiments and simulations.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.58-67
• /
• 2006

Due to the variety of signal processing and complicated mathematical analysis, it is not easy to accomplish 3D bin-picking with non-contact sensor. To solve this difficulties the reliable signal processing algorithm and a good sensing device has been recommended. In this research, 3D laser scanner and CCD camera is applied as a sensing device respectively. With these sensor we develop a two-step bin-picking method and reliable algorithm for the recognition of 3D bin object. In the proposed bin-picking, the problem is reduced to 2D intial recognition with CCD camera at first, and then 3D pose detection with a laser scanner. To get a good movement in the robot base frame, the hand eye calibration between robot's end effector and sensing device should be also carried out. In this paper, we examine auto-calibration technique in the sensor calibration step. A new thinning algorithm and constrained hough transform is also studied for the robustness in the real environment usage. From the experimental results, we could see the robust bin-picking operation under the non-aligned 3D hole object.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.74-77
• /
• 2001

The impact response and damage of CLAS panel was investigated experimentally. The facesheet material used was RO4003 woven-glass hydrocarbon/ceramic and the core material was Nomex honeycomb with a cell size of 3.2mm and a density of 96 kg/$\textrm{m}^{3}$. The shield plane used was RO4003 and 2024-T3 aluminum. Static indentation and impact test was conducted to characterize the type and extent of the damage observed in two CLAS panels, and the performance of antenna used in a wireless LAN system. Correlation of peak contact force, residual indentation and the delamination area shows impact damage of the panel with an aluminum shield plane is larger than that of the panel with RO4003 shield plane, although tile former is more penetration resistant. The damage was observed by naked eye, ultrasonic inspection and cross sectioning. The shape and size of delamination was estimated by ultrasonic inspection, and the area of delamination linearly increases as impact energy increases. The performance of impact damaged antenna was estimated by measuring return loss and radiation pattern.

• 동의생리병리학회지
• /
• 제16권4호
• /
• pp.774-781
• /
• 2002

This study was carried out to test the recuperative effect of 2 types of sample drugs for 3 degree burn. The burn injury was made by iron plate heated in the boiling water. The Sprague Dawley rats were shaven with a razor preliminarily and burned by direct contact method for 10 seconds. The experimental groups were classified with 5 each-normal, control, MEBO ointment, sample A, sample B. The effect of the sample drugs were decided by histological results after 3 week application. The results were as following. The 3 treatment groups recovered the burn injury faster than control group. The recuperative effect precedes about 4-5 days at the time of 15th day and 1 week at the time of 3rd week. The therapeutical procedure of 3 treatment groups was similar with naked eye and with microscopic histology in the 1 st, 2nd and 3rd specimens. So there weren't significant differences in curative effect in 3 treatment groups of this experiment. But a regeneration of hair follicle was noted in Sample B uniquely. These results suggested that 3 burn remedies have similar effect of therpy, but sample B containing yolk sac oil has slightly better effect in part of hair regeneration.

• 유통과학연구
• /
• 제3권2호
• /
• pp.121-142
• /
• 2005

We're living in a world of one global village. The globalization of business is acceleration as more companies cross national borders to find customers, materials and money. Many foreign companies and organizations are doing their business aggressively in Korea and many Korean companies and rushing into foreign market. When people communicate for business with someone from another culture, there could be difficult communication barriers to overcome resulting from differences in their values, beliefs, norms for behavior, expectations, attitudes and so on. To do successfully business, we need to understand culture background and communication style that is different from nation, race, language. Communication barriers stemming from cultural differences may vary. Largely, they can be divided into value system, non-verbal communication, and perception process. Value system can be divided into individualism versus group orientation, avoidance of uncertainty degree, power distance, and high- context culture versus low-context culture. Also non-verbal communication method and perception process may play decisive roles in communication effectiveness. Especially nonverbal communication barriers which sometimes play more important roles than the verbal parts are composed of eye contact, gesture, kinesics, proxemics, chronemics, paralanguage and language of color Cross-cultural communication affect business situation. I expect that if we understand cultural background, and then we overcome cross-cultural communication barriers. To overcome and to adapt inter-cultural business, we need to develope curriculum on the cross-cultural education which I will study in the next paper.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.82-89
• /
• 2011

In general, a number of lifting lugs have been used in shipbuilding industry and the D-type lugs are mainly used. The aim of this paper is to increase the cycle of the use and to reduce the size of lifting lugs to introduce lightweight shackle. In this study, nonlinear elasto-plastic analysis has been performed to confirm the ultimate strength of lifting lugs. In order to evaluate the proper design-load distribution around lug eye, the contact force between lifting lug and shackle pin has been realized by gab element model. Gap element modeling and nonlinear analysis are carried out using the finite element program MSC/PATRAN & ABQUS. Additionally the ultimate strength tests were performed to verify the structural adequacy of newly designed lifting lug and to insure safety of it. The D-10, 15, 20 & 40 ton models which are mainly used in the block erection are selected in the strength test. According to the results of the analysis and strength test, the ultimate strength of the newly designed lifting lugs has been estimated to exceed 3 times of design working load.

• 융합신호처리학회논문지
• /
• 제5권1호
• /
• pp.25-31
• /
• 2004

본 논문은 Smart Card의 일종인 비 접촉 IC 카드의 내부 데이터를 사용하여, 생체인식 요소인 홍채폐턴을 이용한 사용자 인증 시스템의 인증률 향상을 도모한 연구이다. 먼저, CCD 카메라로 입력 받은 안구영상에서 홍채영역을 추출하고, GHA(Generalized Hebbian Algorithm)웨이트를 이용하여 PCA(Principal Component Analysis) Coefficient를 Smart Card 내부에 저장한다. 사용자 인증시에는 실시간으로 입력되는 사용자의 생체 인식 정보와 카드 내부의 사용자 생체 인식 정보를 비교하여, 동일한 경우에 그 인식 정보를 SVM(Support Vector Machine)을 사용하여 분류하였다. 본 논문에서는 실시간 테스트 실험 결과 이전에 개발된 시스템보다 사용자의 인증률이 우수해 짐을 보였다.