Processing is generally employed to alter the physical and chemical properties of feeds used in pig diets, using hammer/roller mills, pellet mills and extruders/expanders. The reported optimum particle sizes of corn are approximately $500{\mu}m$, $500-700{\mu}m$, $400-600{\mu}m$, for nursery, growing-finishing, and breeder pigs respectively. Optimum particle size of grains are affected by diet complexity. There was a trend towards reducing particle size in order to increase ADG in pigs fed a simple diet, though such was not the case for pigs fed a complex diet. Uniformity of particle size also affects the nutritional values of swine feeds. Uniform particle sizes would consistently give greater nutrient digestibilities. In terms of pellet quality, it is reported that a higher incidence of fmes in pelleted feeds has a direct correlation with poorer feed conversion ratio in pigs. Particle and pellet sizes are also very important for pelleting in terms of grinding, digestibility, stomach ulceration and pellet durability. A particle size of $600{\mu}m$, or slightly less, seemed optimal for com in fmishing pigs, and the 5/32 in. diameter pellets supported the best efficiencies of gain during nursery and finishing phases. Extruder and/or expander processes would allow the feed industry an increased flexibility to utilize a wider spectrum of feed ingredients, and improve pellet quality of finished feeds. It would appear that extruded or expanded diets containing highly digestible ingredients have little effect on the growth performance of pigs, and the feeding values of the feeds over pelleted diets were not improved as pigs grew. The extruder or expander is much more effective than a pelletizer in salmonella control. Gastric ulcerations and/or keratinizations were consistently reported in pigs fed mash and processed diets containing finely ground grains, whereas carcass quality was not affected by diet processing methods such as pelleting, extruding or expanding. In corn- or sorghum-based diets, the electrical energy consumption is 4-5 times higher in the expanding than in the pelleting process. But the expander's processing cost was half of that shown by an extruder. Finally, the decision of which feed processing technology to adopt would depend on the processing cost, and any potential improvement in growth performance and digestibilities of nutrients should offset the increased operating and capital costs related to the extruder/expander technology over mash or pelleting processes in pigs.
The purpose of this study was to investigate the stress distribution and intensity derived from the transpalatal lingual arch in the investing bone composed of photoelastic material(PL-3). The transpalatal lingual arch wire was deflected in the horizontal and vertical direction to give the various conditions. The two-dimensional photoelastic stress analysis was performed, and the stress distrebution was recored by photography The results were as follows: 1. In bilateral expansion, as horizontal deflection was singly applied, the stress was more concentrated on the root apex in square free end than round. In square free end, as vertical deflection was increased gradually, the black line meaning center of rotation moved inferiorly together with the increment of whole fringes. 2. In application of vertical deflection on anchorage side for unilateral expansion, the stress distribution that expansive force leaned to expansion side was observed. As vortical deflection increased, the extruding stress was observed on molar of expansion side. And as horizontal deflection increased, the tipping stress on the molar of anchorage side was observed. 3. In unilateral rotation with the asymmetric toe-in, the fringe appeared on the distal aspect of root apex.
The research of fused oocytes was conducted to investigate the in vitro mejotic maturation of immature oocytes (GV oocytes) fused with oocytes in germinal vesicle breakdown (GVBD oocytes) in the presence of dbcAMP which is known as one of the strong inhibitors to GVBD. The immature oocytes fused together as well as those fused with GVBD oocytes proceeded to GVBD in 3 hr culture in plain medium. But in the medium containing dbcAMP (100$\mu$g/ml), the immature oocytes fused together did not show any GVBD and thus the fusion itself could not affect the inhibitory activity of dbcAMP. However, all of the immature oocytes fused with GVBD oocytes underwent GVBD in 3 hr culture despite of the presence of dbcAMP. When the culture was extended to 20 hr, nearly all of the immature oocytes fused together were still arrested at the GV stage in the presence of dbcAMP. But most of the fused oocytes which had shown GVBD during 3 hr culture developed to metaphase II stage extruding one or two polar bodies regardless of the presence of dbcAMP. In this experiment, it was found that two sets of the metaphase chromosomes were somewhat concomitant with a pair of the polar bodies in the fused egg. Upon the results of the present studies, it is assumed that there may be a maturation promoting factor(s) in the cytoplasm of the GVBD occytes, and this factor(s) possibly nullifies the function of dbcAMP.
Intact seeds of burcucumber (Sicyos angulatus L.) are not nearly germinated so that the farmers remove their arils before sowing. The study was carried out to measure the effort of aging, chilling, washing, chemical treatment, drying, and their sequential treatments on the germination of ones with arils and the seedling emergence. The seeds extruding over 1mm of their radicles and the seedlings with fully expanded cotyledons were counted daily for calculating the germination and the seedling emergence rates. Seedcoat softening using 10% NaOH solution somewhat enhanced their germination rate of the intact seeds harvested in the current year, but aging treatment done on 6 days at $45^{\circ}C$ after NaOH treatment increased the germination rate more than only NaOH treatment. A day washing after the NaOH treatment and a day chilling after the washing increasingly elevated the rates as well. Irrigation of 0.2% $\textrm{KNO}_3$ solution, moreover, showed the greatest germination rate of the priming treatments done during all the 7 day chilling. Drying the seeds after the combined treatment of chilling and priming more inclined the germination rate than nondrying ones, but red light treated during 24 hour desiccation was more effective in the germination rate increment than dark condition. The seeds done the sequential treatments of aging, NaOH, washing, combining chilling and priming and drying under red light illumination were germinated up to 80% but seedlings were emerged to 60%, lower than ones removed their arils.
The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.
Ohh, S.H.;Han, K.N.;Chae, B.J.;Han, In K.;Acda, S.P.
Asian-Australasian Journal of Animal Sciences
/
v.15
no.12
/
pp.1765-1772
/
2002
Three experiments were conducted to determine the feed processing method best suited for early and conventionallyweaned pigs, and to investigate the effects of different extrusion temperatures on ileal digestibility of amino acids in diets containing different protein sources. In exp.1, a total of 108 pigs (Landrace${\times}$Yorkshire${\times}$Duroc; 24 d of age and 7.60 kg average body weight) were alloted on the basis of sex, weight and ancestry to three treatments in a randomized complete block design. Feed processing methods used were mash (M), simple pellet (SP), and expanded pellet (EP). In exp. 2, a total of 96 pigs (Landrace${\times}$Yorkshire${\times}$Duroc; 14 d of age) were allotted on the basis of sex, weight, and ancestry to three treatments in a randomized complete block design. Diets were mash (M), expanded pellet (EP), and expanded pellet crumble (EPC). In exp. 3, a study was designed to investigate the effect of different extrusion temperatures (100, 120, and $140^{\circ}C$) over the control (untreated) on the ileal digestibility of amino acids in diets containing protein sources such as spray-dried plasma protein (SDPP), whey protein concentrate (WPC), and fish meal (FM). Results in exp.1 showed that ADG, ADFI and the F/G ratio of pigs fed the SP diet were improved (p<0.05) compared with those fed the M or the EP diets, but the digestibility of nutrients was not different (p>0.05) among the treatments. In exp. 2, pigs fed expanded pellet treatments (EP or EPC) had a significantly improved (p<0.05) F/G ratio compared to the pigs fed the M diet which was primarily attributed to the significant reduction (p<0.05) in ADFI, but the overall growth rate of pigs fed expanded pellet diets was not improved. In exp. 3, there was a significant interaction effect (p<0.05) between the extrusion temperature and protein source on the ileal digestibility of amino acids. With an extrusion temperature of $100^{\circ}C$, the ileal digestibility of Lys, Val, Gly and Ser was significantly lower in the diet containing WPC compared to the diet containing SDPP. Increasing the temperature to $120^{\circ}C$ led to significant differences (p<0.05) in the digestibility of Thr and Tyr between diets containing WPC and SDPP. Regardless of extrusion temperatures, the weaned pigs' diet containing either SDPP or FM had significantly higher Lys, Phe, Thr, Val, and Gly digestibility relative to the WPC diet. Results of the present study suggest that simple pelleting of diets containing protein sources such as whey protein concentrate, spray-dried plasma protein and fish meal would be better than the extruded or expanded pellet diets. Extruder or expander processing of weaned pigs' feed could reduce palatability and ileal digestibility of several amino acids and therefore may be responsible for a negative growth response in weaned pigs.
A chameleonic surface proposed in this study was a pin-art and 3D display device for generating arbitrary shapes. A smooth and continuous surface was formed using slim telescopic actuators and high-elasticity composite material. Realistic 3D shapes were continuously generated by projecting dynamic mapping images on the surface. A slim telescopic actuator was designed to show long strokes and minimize area for staking. A 3D shape was formed by thrusting and extruding the high-elasticity material using multiple telescopic actuators. This structure was advantageous for generating arbitrary continuous surface, projecting dynamic images and lightening weight. Because of real-time synchronization, a distributed controller based on EtherCAT was applied to operate hundreds of telescopic actuators smoothly. Integrated operating software consecutively generated realistic scenes by coordinating extruded shapes and projecting 3D image from multiple projectors. An opera content was optimized for the chameleon surface and showed to an audience in an actual concert.
Phthalate plasticizers are regulated by RoHS, REACH and CPSC as hazardous substances. Responding to these international environmental restrictions, we developed ABS certified reference material (CRM) for determination of phthalate plasticizers such as DMP, DEP, DBP, BBP, DEHP and DnOP. The candidate material has been made with ABS resin widely used in electric and electronic products and 6 kinds of phthalate plasticizers. The making of the material involved a series of processes like extruding, cooling, pelletizing, and drying using twin screw extruder. Then it has been certified according to ISO Guide 35. Using isotope dilution-gas chromatography/mass spectrometry (ID-GC/MS), homogeneity, short-term stability, and long-term stability were evaluated. The certified values were determined by using primary reference material (PRM) of KRISS for traceability. From now on, we will provide ABS CRM to national and international companies and research institutes after certification as certified reference material and registering on COMAR (code of reference material).
Examination of the morphology of red blood cells in the urine has been shown to be a promising adjunct in determining whether hematuria represents glomerular or nonglomerular bleeding. This is due to distortion of RBCs as they Pass across the basement membrane of the glomerular capillaries. It is concluded that is method can greatly help the clinician in distinguishing between glomerular and nonglomerular bleeding in patients with hematuria and channeling such patients toward the most appropriate investigations. We have experimented dysmorphic red blood cells that 5 patients of the hematuria are distorted with irregular outlines and often have small blobs extruding from the red cell membrane. Tried urinary sediments were seen with phase contrast microscope and confirmed scanning electron microscope. There are seen acanthocytes, anulocytes, ghost cells and sphero-echinocytes in dysmorphic erythrocytes. Clinical diagnosis was referred from the result of the biopsy-proven. Scanning electron microscopic findings of the hematuria are good diagnostic tool that disclose in distorted red blood cells from patients with glomerular disorders.
Adult emergence period, the calling behavior pattern and the mating ability of female depending on ages, 9day old male's response to sex pheromone released from each 1- to 5-day old female, and the structure and location of sex pheromone gland were obse~edin Ostrinia furnacalis. Adults usually emerged from 1 hour before to 1-2 hours after the beg~nning of scatophase under the 16L/8D photoperiod. And most active calling behavior was obserued for two hours from the 5th to 7th hours of scotophase among 2- and 3-day old females, and 3-day old male' response to 3-day old females was higher than to any other age of females during the 5th-8th hours of scotophase. Mating frequency was higher at the 4th-7th hours after the beginning of scotophase. Among 1. to Cday old females extruding sex pheromone gland, more than 65% of them successfully mated with 2- to 4-day old males. And, 2- or 3-day old females exhuding sex pheromone gland showed an abdiw. over 60%, to mate with each 1--5-day old males. Hypertrophied cell layers, presumed to be a sex pheromone gland of female adults, were located at two intersegmental membranes between the 8th & 9th, and the 9th & 10th abdominal segments.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.