• 제목/요약/키워드: Extreme-Pressure

검색결과 317건 처리시간 0.024초

Magnetron Sputter Coating of Inner Surface of 1-inch Diameter Tube

  • Han, Seung-Hee;An, Se-Hoon;Song, In-Seol;Lee, Keun-Hyuk;Jang, Seong-Woo
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.135-135
    • /
    • 2015
  • Tubes are of extreme importance in industries as for fluid channels or wave guides. Furthermore, some weapon systems such as cannons use the tubes as gun barrels. To increase the service life of such tubes, a protective coating must be applied to the tubes' inner surface. However, the coating methods applicable to the inner surface of the tubes are very limited due to the geometrical restriction. A small-diameter cylindrical magnetron sputtering gun can be used to deposit coating layers on the inner surface of the large-bore tubes. However, for small-bore tubes with the inner diameter of one inch (~25 mm), the magnetron sputtering method can hardly be accommodated due to the space limitation for permanent magnet assembly. In this study, a new approach to coat the inner surface of small-bore tubes with the inside diameter of one inch was developed. Instead of using permanent magnets for magnetron operation, an external electro-magnet assembly was adopted around the tube to confine the plasma and to sustain the discharge. The electro-magnet was operated in pulse mode to provide the strong axial magnetic field for the magnetron operation, which was synchronized with the negative high-voltage pulse applied to the water-cooled coaxial sputtering target installed inside the tube. By moving the electro-magnet assembly along the tube's axial direction, the inner surface of the tube could be uniformly coated. The inner-surface coating system in this study used the tube itself as the vacuum chamber. The SS-304 tube's inner diameter was 22 mm and the length was ~1 m. A water-cooled Cu tube (sputtering target) of the outer diameter of 12 mm was installed inside of the SS tube (substrate) at the axial position. The 50 mm-long electro-magnet assembly was fed by a current pulse of 250 A at the frequency and pulse width of 100 Hz and 100 usec, respectively. The calculated axial magnetic field strength at the center was ~0.6 Tesla. The central Cu tube was synchronously driven by a HiPIMS power supply at the same frequency of 100 Hz as the electro-magnet and the applied pulse voltage was -1200 V with a pulse width of 500 usec. At 150 mTorr of Ar pressure, the Cu deposition rate of ~10 nm/min could be obtained. In this talk, a new method to sputter coat the inner surface of small-bore tubes would be presented and discussed, which might have broad industrial and military application areas.

  • PDF

아산만 요각류 Calanus sinicus의 알 생산 (Egg Production by Marine Copepod Calanus sinicus in Asan Bay, Korea)

  • 박철;이평강
    • 한국수산과학회지
    • /
    • 제28권1호
    • /
    • pp.105-113
    • /
    • 1995
  • 요각류 Calanu sinicu의 생물량과 산란의 계절성을 조사하였다. 조사해역인 아산만에서는, 성체는 봄철에 가장 많은 양이 출현하고, 다른 계절에는 소량 분포하는 연중 1회 peak를 보였지만, 산란에서는 봄철(4-5월)과 가을철 (9월)의 연중 2회 peak를 보였다 산란기의 개체군 평균 산란은 봄철에는 16.3 eggs/female/day, 가을철에는 7.6 eggs/female/day였으며, 1개체가 생산하는 최대 값은 39.0이었다. 타 해역에 비하여 비교적 풍부한 유기탄소량과 알 생산과의 상관관계가 유의적이지 않아 (r=0.43, p=0.3), 먹이 농도는 알 생산에 큰 영향을 주지 않는 것으로 판단되었다. 그러나 실험실에서 제공된 먹이를 충분히 섭취하면서도 처음 며칠이 지난 뒤에는 산란이 중지되는 것으로 보아, 먹이의 질과 과거의 섭식경력 (feeding history)이 산란과 밀접한 관계가 있을 것으로 유추되었다. 비록 통계적으로 유의적인 상관관계는 얻지 못하였으나, 상대적으로 높거나 낮은 수온에서는 산란하지 않아 대상해역의 수온 변화도 산란과 관계가 있을 것으로 유추되었다. 알 생산율 자료로부터 제한된 해역인 아산만에서는 연중 두 세대의 생활사가 진행되는 것으로 파악되었으며, 분포의 계절 변화와 생활사의 진행이 직접적으로 관련된 시기가 있는가 하면, 생활사 이외에 상위 영양단계의 포식압력 등에 의한 이주 등이 분포의 계절변화와 관련된 시기가 있는 것으로 추정되었다. 종전의 결과와 비교할 때, 계절에 따라 비교적 광범위한 해역을 이주하면서, 알 생산은 연중 간헐적으로 계속될 가능성도 배제할 수 없었다.

  • PDF

Wind loads and load-effects of large scale wind turbine tower with different halt positions of blade

  • Ke, Shitang;Yu, Wei;Wang, Tongguang;Zhao, Lin;Ge, Yaojun
    • Wind and Structures
    • /
    • 제23권6호
    • /
    • pp.559-575
    • /
    • 2016
  • In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in $350^{\circ}$ to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in $330^{\circ}$ under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.

고리1호기 계통제염을 위한 원자로냉각재내 유동 특성 평가 (Flow Characteristics Evaluation in Reactor Coolant System for Full System Decontamination of Kori-1 Nuclear Power Plant)

  • 김학수;김초롱
    • 방사성폐기물학회지
    • /
    • 제16권3호
    • /
    • pp.389-396
    • /
    • 2018
  • 국내 가동원전 중 2-루프 가압경수로인 고리1호기는 약 40년 운전한 후, 2017년 6월 18일 영구정지되었다. 영구정지된 고리 1호기는 주요 해체작업을 수행하기전에 계통내 선량률을 저감시켜 작업자피폭을 최소화하기 위한 계통제염을 수행할 예정이다. 일반적으로, 계통제염 범위는 원자로압력용기, 가압기, 증기발생기, 화학 및 체적제어계통, 잔열제거계통 및 원자로 냉각재계통 주요배관을 포함한다. 이러한 계통 및 기기 등을 효율적으로 제염하기 위해서는 제염과정에서 원자로냉각재계통내 유동특성을 평가할 필요가 있다. 계통제염을 위해 순환유량을 제공하는 방법은 다양하나, 본 논문에서는 잔열제거펌프 운전에 따른 고리1호기 원자로냉각재계통내 유동특성을 평가하였다. 잔열제거펌프를 이용한 계통제염은 원자로냉각재 내 유량의 불균형을 초래하여 계통내 기기 및 배관 등에 불순물을 침적시켜 제염이 효율적이지 않다는 것으로 평가되었다.

Rainfed Areas and Animal Agriculture in Asia: The Wanting Agenda for Transforming Productivity Growth and Rural Poverty

  • Devendra, C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권1호
    • /
    • pp.122-142
    • /
    • 2012
  • The importance of rainfed areas and animal agriculture on productivity enhancement and food security for economic rural growth in Asia is discussed in the context of opportunities for increasing potential contribution from them. The extent of the rainfed area of about 223 million hectares and the biophysical attributes are described. They have been variously referred to inter alia as fragile, marginal, dry, waste, problem, threatened, range, less favoured, low potential lands, forests and woodlands, including lowlands and uplands. Of these, the terms less favoured areas (LFAs), and low or high potential are quite widely used. The LFAs are characterised by four key features: i) very variable biophysical elements, notably poor soil quality, rainfall, length of growing season and dry periods, ii) extreme poverty and very poor people who continuously face hunger and vulnerability, iii) presence of large populations of ruminant animals (buffaloes, cattle, goats and sheep), and iv) have had minimum development attention and an unfinished wanting agenda. The rainfed humid/sub-humid areas found mainly in South East Asia (99 million ha), and arid/semi-arid tropical systems found in South Asia (116 million ha) are priority agro-ecological zones (AEZs). In India for example, the ecosystem occupies 68% of the total cultivated area and supports 40% of the human and 65% of the livestock populations. The area also produces 4% of food requirements. The biophysical and typical household characteristics, agricultural diversification, patterns of mixed farming and cropping systems are also described. Concerning animals, their role and economic importance, relevance of ownership, nomadic movements, and more importantly their potential value as the entry point for the development of LFAs is discussed. Two examples of demonstrated success concern increasing buffalo production for milk and their expanded use in semi-arid AEZs in India, and the integration of cattle and goats with oil palm in Malaysia. Revitalised development of the LFAs is justified by the demand for agricultural land to meet human needs e.g. housing, recreation and industrialisation; use of arable land to expand crop production to ceiling levels; increasing and very high animal densities; increased urbanisation and pressure on the use of available land; growing environmental concerns of very intensive crop production e.g. acidification and salinisation with rice cultivation; and human health risks due to expanding peri-urban poultry and pig production. The strategies for promoting productivity growth will require concerted R and D on improved use of LFAs, application of systems perspectives for technology delivery, increased investments, a policy framework and improved farmer-researcher-extension linkages. These challenges and their resolution in rainfed areas can forcefully impact on increased productivity, improved livelihoods and human welfare, and environmental sustainability in the future.

자살위기를 벗어난 여성독거노인의 회복과정에 관한 현상학적 연구 (A Phenomenological Study on the Recovery Process of Elderly Women Living Alone in Suicide Crisis)

  • 임종린;김종성
    • 한국산학기술학회논문지
    • /
    • 제21권8호
    • /
    • pp.304-314
    • /
    • 2020
  • 본 연구의 목적은 여성독거노인이 자살위기에서 벗어난 경험과 회복과정을 연구하여 참여자들이 회복으로서의 인생의 본질적 의미와 구성요소가 무엇인지, 또한 변화된 생각과 인생에 대한 현상은 무엇인지를 알아보았다. 본 연구의 결과는 자료분석을 통해 4개의 구성요소와 8개의 하위구성요소, 16개의 의미단위 축약이 도출되었다. 여성독거노인의 자살시도와 회복 경험의 구성요소는 4개로 단절과 불통, 거듭되는 시련, 곤경 속의 형통의 길, 너그러운 포용으로 나타났다. 구성요소의 본질적인 주제는 참여자들의 삶에서 개별적인 것이 아니라 각각의 주제가 전체적 맥락적으로 연결되어 있었다. 결과를 정리해보면 여성독거노인의 자살시도와 회복 경험의 본질적 의미는 역기능적인 사회구조와 환경의 결과물로 인하여 연구 참여자들의 삶을 괴롭게 하였다. 이를 극복하기 위한 방법적 대안으로 자살이라는 극단적 실행으로 문제를 해결하려고 했으나, 자살실패를 하게 되고, 이 과정에서 인지된 내면의 회복요인들이 다시 살아갈 수 있는 긍정적 에너지가 되었다. 이러한 전환된 시각이 힘든 현실에 맞설 수 있는 것으로 나타났다.

첨단산업 부품소재인 희토류의 가격파동에 대해서 (Price Rally of Rare Earth, Material for High-Tech Products)

  • 최판규
    • 한국자기학회지
    • /
    • 제21권3호
    • /
    • pp.116-119
    • /
    • 2011
  • 지난해 9월7일 일본의 센카쿠열도(중국명 댜오위다오) 부근에서 중국어선이 조업을 하던 중, 일본 순시선이 영해침범 혐의로 중국어선에 정선을 명령하자 순시선을 들이받는 사건이 발생했다. 순시선은 영해를 침범한 혐의로 중국어선을 오키나와로 나포했고, 이후 이 사건은 일본과 중국의 영토문제, 외교 및 경제 갈등으로 확산되었다. 이번 사태의 핵심에는 센카쿠 열도에서 일어난 사건에 국내법을 적용, 사법 처리하는 선례를 남기면서 자국의 '실효 지배'라는 사실을 국제무대에 알리고자 했던 일본의 속내와 이 지역을 '국제분쟁지역화' 하고자 한 중국의 속내가 얽혀있었다. 이러한 갈등 과정에서 양국 정상들의 회담이 무산되고 중국과 홍콩에서 반일시위가 일어나는 등 대립이 수개월간 지속되다 중국이 일본에 희토류 수출중단이라는 초강경 경제보복을 하자마자 일본은 무조건적으로 중국어선 선장을 석방하고 이 사건을 마무리 했다. 이 사건을 계기로 전문가는 물론 많은 일반 사람들까지도 "희토류"라는 것이 어떤 물질이며, 어디에 쓰이며, 얼마나 중요한 것인지를 인식하게 되었다. 최근 중국정부의 희토류관련 정책에 따라 희토류 가격이 급격히 오르면서, 세계적으로 큰 혼란을 야기하고 있다. 이에 본 글에서는 희토류 가격파동과 향후 전망에 대해서 고찰하였다.

관절 가동운동(mobilization)이 관절 감수기(joint receptors)에 미치는 영향 (Effects of Joint Mobilization Techniques on the Joint Receptors)

  • 김선엽
    • 한국전문물리치료학회지
    • /
    • 제3권2호
    • /
    • pp.95-105
    • /
    • 1996
  • 지금까지의 내용을 요약하면 먼저, 인체의 각 관절 주위에는 관절의 움직임과 위치를 파악하는 감지기 역할을 하는 기계적 감수기가 있다. 이러한 감수기는 크게 네가지로 구분되어지는데 대개 I형 감수기, II형 감수기 등의 용어를 사용한다. 각각의 감수기의 특성(표 2.)을 알아보면, 루피니(Ruffini)감각기와 유사한 모양을 하고 있는 I형 관절감수기는 주로 운동의 속도(speed)와 방향(direction)을 감지(detection) 하며, 파시니안(Pacinian)감각기와 유사한 형태를 하고 있는 II형 관절감수기는 매우 작은 움직임에 대한 감지를 하는데, 예를 들어 속도가 가속(acceleration)되는 것과 같은 움직임 등을 알아낸다. 이외에 골지건과 비슷한 모습을 하고 있는 III형 관절감수기는 운동의 자세(position)와 방향에 대한 정보를 전달하게 된다 (Carpanter, 1990). 관절의 자세 유지 혹은 안정성 즉, 정적(static) 운동에 주로 관여하는 I형 관절감수기와, 역동적(dynamic)인 운동에 감지를 주로 하는 II형 관절감수기는 진동(oscillation)자극에 잘 촉진된다. 이러한 자극은 동통이 심하게 발생된 관절에 나타나는 근육의 과긴장(hypertonicity)과 동통을 경감시킬 수 있다. III형 관절감수기는 억제 (inhibitory)감수기라 할 수 있는데, 골지건(golgi tendon organ)의 기능과 매우 관련이 깊다. 이 감수기는 관절의 가동범위를 기계적인 자극으로 증가시키기 위해 관절의 가동 끝범위에서 강한 신장(strong strectch)이나 thrust 기술로 감수기를 촉진할 수 있다. 이러한 자극은 결국 근육에 이완을 얻게 할 수 있다. 위에서 언급한 관절 주위의 조직에 분포한 특별한 기계적 감지를 환자들의 임상 증상에 따라 선택적으로 자극하는 치료를 적용할 수 있다면, 현재 물리치료사들이 적용하고 있는 관절 가동운동을 좀더 전문적인 수준으로 수행할 수 있을 것이다.

  • PDF

소아환자의 세보플루란 흡입진정시 미다졸람 병용 투여의 효과에 관한 예비연구 (Effects of Midazolam with Sevoflurane Insufflation Sedation on Concomitant Administration in Pediatric Patients : A Preliminary Study)

  • 지성인;김종수
    • 대한소아치과학회지
    • /
    • 제41권4호
    • /
    • pp.283-291
    • /
    • 2014
  • 심한 치과적 공포와 불안으로 치과적 행동조절에 문제를 일으키는 환자의 경우, 진정법과 같은 약물적 행동 조절 방법이 요구될 수 있다. 이번 연구에서는 소아 환자에서 세보플루란 흡입진정시에 추가적으로 0.1 mg/kg의 미다졸람을 근육주사하였을 때 진정 깊이와 심폐기능에 미치는 영향을 알아보기 위해 2013년 1월부터 2014년 3월 사이 본원에서 세보플루란 흡입진정 하에 치과치료를 받은 환자의 마취기록지를 후향적으로 분석하였다. 3~6세의 환자를 대상으로 하였으며, 세보플루란 단독 사용군이 18명, 미다졸람 병용 투여군이 18명이었다. 미다졸람 병용 투여군의 평균 엔트로피 값은 세보플루란 단독 사용군에 비해 10정도 낮게 측정되었으나 통계적 유의성은 없었으며(p > 0.05), 분당 심박수와 평균동맥압은 미다졸람 병용 투여군이 세보플루란 단독 사용군에 비해 높은 값을 보였다(p < 0.05). 즉, 0.1 mg/kg의 미다졸람 근육주사는 세보플루란 흡입진정시 진정의 질을 높이는데 큰 도움이 되지는 않았으며, 추후 세보플루란 흡입진정과 병용 사용하기에 적절한 미다졸람의 용량을 결정하기 위한 추가적인 연구가 필요할 것으로 사료된다.

필드조건, 엔진오일의 종류에 따른 오일성능 분석 (Analysis of Oil Performance by Different Type of Engine Oil In the Field)

  • 김영환;송준희;김한주
    • 에너지공학
    • /
    • 제26권3호
    • /
    • pp.131-136
    • /
    • 2017
  • 자동차 엔진오일은 엔진 시동 시 가장 중요한 윤활제이다. 최근 자동차 회사 와 윤활유 제조업체들은 교환주기를 연장하기 위해 첨가제를 사용하여 오일의 품질을 상당히 개선하고 있다. 대부분의 고객은 자동차 제작사의 정품오일을 사용하거나 전문가의 추천을 받아 사용한다. 본 논문을 통해 소비자가 고효율 윤활유를 선택하는 또 다른 기준점을 제안한다. 본 논문은 7개월 동안 실제 자동차의 운전 조건을 고려하여 오일의 6가지 화합물을 조사 비교 분석하였다. 물리적, 화학적 관점에서 실험을 수행했다. 현장에서 다양한 실험을 통해 광유와 합성유 화합물은 산화, 점도, 유동성 및 TBN에서 크게 구분된다. 이들은 엔진 부품 피스톤, 베어링 등의 마모에 영향을 준다. 다양한 오일을 비교하였을 때 인화점, 산화 안정성에서 합성유의 성능이 좋고 오염 물질인 Fe와 Al 화합물의 변화가 적은 것으로 나타났다. 오일의 첨가제는 광유와 합성유에서 청정분산제 Ca가 확연한 차이를 나타냈다. 극압제 Zn과 윤활 향상제 P는 유사하였다.