• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.677-683
• /
• 2017

본 연구에서는 2016년 8월 해역(서해, 남해, 동해)별로 기온에 따른 수온의 반응 및 지연시간을 연구하였다. 사용된 1시간 간격의 자료는 국립수산과학원에서 제공하는 8개 지점 해역별 수온자료와 수온관측소 인근 8개 지점 기상청 AWS 기온자료를 이용하였다. 내삽법을 이용하여 관측되지 못한 자료값을 계산하였고, FIR Filter를 이용하여 조류 및 일변화 영향을 제거하여 자료의 주기성을 파악하였다. 남해 2 지점은 기온과 수온이 유사한 주기성을 가졌으며, 0.8의 높은 상관계수와 약 50시간의 지연시간을 나타냈다. 서해 4 지점은 얕은 수심과 조석차로 인해 기온변화에 따른 수온의 지연시간이 약 12시간으로 반응시간이 다른 해역에 비해 빨랐다. 동해는 해안지형에 따른 환경적 요인과 깊은 수심으로 인해 기온과 수온의 상관성을 보이지 않았다. 본 연구를 통해 AT-SST 간의 지연시간을 파악함으로써 양식생물의 피해를 최소화 하는데 기여할 것이고, 수산업에서의 폭염 피해에 대한 신속한 대응 체계가 마련될 것이라 기대한다.

• Spatial Information Research
• /
• 제20권6호
• /
• pp.129-137
• /
• 2012

극한(寒)지에서 건설사업을 수행하기 위해서는 건설의 초기 단계인 기획, 설계단계부터 지형자료와 같은 현지에 대한 기반 데이터가 반드시 요구되며, 필요에 따라 수시로 현지조사를 수행할 필요가 있다. 그럼에도 극한지는 지역적 특성상 대부분 원거리에 있고 접근이 용이하지 않다는 특성이 있으며, 특히 남극과 같은 특수지역은 현지 조사를 수행하는 것 자체가 어렵고, 현지조사를 수행한다 해도 현지를 방문할 수 있는 인원이 매우 제한적이어서 대부분은 현장을 모르고 건설에 참여하게 됨으로써 의사결정 오류나 설계 오류 등이 발생할 확률이 높아지게 된다. 따라서 본 연구에서는 이러한 문제를 해결고자 남극 장보고기지 건설지 주변을 연구대상지로 선정하여 원격탐사를 통해 광역적 지형데이터와 노출지반 암석분류데이터를 구축하는 방법과 건설부지에 대해서는 정밀 지형데이터를 구축하는 방법 등을 살펴보았다. 또한, 3차원 GIS 기술을 통해 이러한 데이터를 통합적으로 관리하고 가시화함으로써 모든 건설참여자가 현장 감각을 익히고 수시로 필요한 분석을 수행할 수 있도록 하는 방법을 제시하고자 하였다. 이를 통해 건설사들이 실제 극한지 건설공사를 수행하고자 할 때 현지 공간데이터를 DB화하고 3차원 가시화함으로써 건설환경을 필요시 마다 분석할 수 있어 의사결정이나 설계 등 건설 업무를 지원할 수 있을 것으로 기대한다.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.843-851
• /
• 2022

This paper was conducted to study the conditions for the manufacture and operation of artificial snow removal and ice-making test facilities so that the test equipment can be tested in a low-temperature environment using the polar environment performance test facility. The polar environment performance test Facility is designed to artificially simulate extreme environments up to -65 ℃, and is a mid-to-large low-temperature environment test facility that can perform performance tests on offshore plant equipment, ships, leisure, and offshore structures. To verify the safety of deck work of ships operating in polar environments, artificial snow removal and artificial ice making devices were manufactured, and we conducted research on various operating environments using these facilities. For the efficient operation of artificial snow and ice making facilities, it is important to continuously supply dry air, and it has been found that installing an additional heater at the tip of the nozzle is effective in preventing freezing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.912-915
• /
• 2004

A vacuum environment is very important for NGL(Next Generation Lithography) apparatuses such as EUVL(Extreme Ultra Violet Lithography) or EPL(Electron Projection Lithography) and so on. The performance of these systems is dominated by vacuum level of processing and positioning accuracy of a stage. So, ultra-precision stage usable in a high vacuum level is needed for the improved performance of these devices. In contrast to atmospheric condition, a special attention must be paid to guide bearing, actuator and other elements. In this paper, air bearing is adopted because of its very high motional accuracy. So, air bearing is designed to be vacuum compatible using differential exhaust method, which prevents air from entering into vacuum chamber. For this, leakage analysis is performed theoretically and verified from experiment.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.59-66
• /
• 2014

PURPOSES : This study is to suggest heavy snow risk analysis in Seoul. METHODS : Recently, the increase of extreme weather caused by global warming raises the occurrences of unpredictable natural disasters and the loss potential of human disasters by land use facilities accumulation. It is necessary to develop the risk analysis for the natural and human disasters. RESULTS : In this study, heavy snow risk analysis among natural disasters in Seoul was suggested. The spatial unit of risk analysis level was established for the lines and administrative districts. CONCLUSIONS : The risk analysis was performed using risk matrix of disaster occurrence score and disaster damage score. The components affecting the risk disaster analysis by types were analyzed and the application of heavy snow risk analysis was suggested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.747-750
• /
• 2004

After launching, spacecraft is exposed to extreme environments. So spacecraft should be tested after design/manufacture to verify whether components can be operated functionally. Acceleration transferred from launch vehicle to spacecraft produces quasi-static load, sine vibration and random vibration. Random vibration is also induced by acoustic vibrations transferred by surface of spacecraft. And shock vibration is produced when spacecraft is separated from launch vehicle. To verify operation of spacecraft under these launch environments, separation shock test, sine vibration test, acoustic vibration test and random vibration test should be performed. This paper describes these launch environment test requirements.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.121-126
• /
• 2013

The new algorithm technique is necessary to incorporate for analyzing and evaluating extreme condition like a nuclear accident. In this study, the combined methodology for measuring the three-dimensional space was compared with SIFT (Scale Invariant Feature Transform) and SURF (Speeded-Up Robust Feature) algorithm. The suggested method can be used for the acquisition of spatial information using the robot vision in the districted area of the nuclear facilities. As a result, these data would be helpful for identify the damaged part, degree of damage and determination of recovery sequences.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.137-138
• /
• 2002

The benefits of using DLC coatings on steel in dry sliding are well known. The present study has investigated the effects of using the same materials but in a boundary lubricated environment. Tribological tests were performed using a load-scanning device and a lubricant with an extreme-pressure (EP) additive. XPS and grazing incidence XRD are used for chemical analysis. The chemical composition of the resulting tribofilm is correlated to different friction behaviors and contact loads, and indicates that high loads are beneficial for formation of low friction tribofilm.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2013년도 하계학술대회
• /
• pp.322-324
• /
• 2013

Haze is an extreme reason of the reduction of contrast when capturing image in the outdoor. Recently, there are several single image dehazing techniques, but they are not robust in dynamic variations of natural environment caused by the thickness, coverage of haze and appearance of sunlight. In this paper, we propose an effective and robust method to enhance luminance for image dehazing depending on histogram analysis. Compare with conventional methods, our proposal have better performance in term of contrast, and computation time.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2012년도 추계학술대회
• /
• pp.5-8
• /
• 2012

Haze is an extreme reason of the reduction of contrast when capturing image in the outdoor. Recently, there are several single image dehazing techniques, but they are not robust in dynamic variations of natural environment caused by the thickness, coverage of haze and appearance of sunlight. In this paper, we propose an effective and robust method to restore degradation of hazy image. Compare with conventional methods, our proposal have better performance and computation time.