• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.3
• /
• pp.157-172
• /
• 2010

Using 61 observation data of the recent 30 years from 1979 to 2008, we have identified the areas which had climatologically frequent occurrence of extraordinary low and high temperature leading to meteorological disasters. The station of the highest temperature deviation was Gangneungduring the period of April through July. Furthermore, the eastern coast region including Gangneung recorded the largest amplitude of temperature deviation in Korea, showing the climatological evidence that the temporal variation was the largest. During the period of April to October, most of the days with extraordinary high temperature were found in April. The regionswith more than 30days of extraordinary high temperature werethe eastern and western coast regions. Thus, special attention to prevent the meteorological disaster related to extraordinary high temperature is required in the coast regions particularly during April. Meanwhile, further attention to prevent the disaster related to extraordinary low temperature is required in Gangwon inland, Chungcheong inland, and the southern province especially in August.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.63-66
• /
• 2004

The extraordinary intrinsic properties of SiC have made this material a suitable choice to use in high temperature, high frequency, and high voltage applications. In additional to these, SiC could be employed as the based material for nonvolatile memory applications, mainly due to its extremely low thermal-generation rate at room temperature. In this paper, the reasons of using this material in this particular application is presented and the development of the application over the past fifteen years is reviewed.

• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.207-214
• /
• 2012

High temperature deformation behavior of a $Ni_{30}Fe_{53}Co_{17}$ alloy, with its extraordinary low coefficient of thermal expansion less than $10{\times}10^{-6}K^{-1}$ at temperatures ranging from room temperature to 673K, was investigated by conducting a series of compression tests. From an empirical processing map, the appropriate working temperature-strain rate combination for optimum forming was deduced to be in the ~1373K, $10^{-2}s^{-1}$ region. This region has a relatively high power dissipation efficiency, greater than 0.36. Furthermore, open die forging of a 100mm diameter billets was performed to confirm the variation of thermo-physical properties in relation to microstructure. The coefficient of thermal expansion was found to increase considerably with increasing the open die forging temperature and decreasing the cooling rate, which in turn provides a drastic increase in the average grain size.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.2
• /
• pp.69-76
• /
• 2000

The rf plasma chemical vapor deposition is a common method employed for diamond or amorphous carbon deposition. Diamond possesses the strongest bonding, as exemplified by a number of unique properties-extraordinary hardness, high thermal conductivity, and a high melting tempera tore. Therefore, it is very important to investigate the synthesis of semiconducting diamond and its use as semiconductor devices. An inductively coupled rf plasma CVD system for producing amorphous carbon films were developed. Uniform temperature and concentration profiles are requisites for the deposition of high quality large-area films. The system consists of rf matching network, deposition chamber, pumping lines for gas system. Gas mixtures with methane, and hydrogen have been used and Si (100) wafers used as a substrate. Amorphous carbon films were deposited with methane concentration of 1.5% at the process pressure of S torr~20 torr, and process temperature of about $750^{\circ}C$. The nucleation and growth of the amorphous carbon films have been characterized by several methods such as SEM and XRD.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.298-303
• /
• 1996

A double diffusion technique is developed to enhance the effective mode index of optical waveguides in $LiTaO_3$. It consists of Zn diffusion from the vapor phase at relatively low temperatures (750->$800^{\circ}C$), into waveguides initially produced by Ti indiffusion at higher temperature (1150->$1200^{\circ}C$). Both X- and Z-cut substrates are investigated. A model that combines profiles of both diffusion is formulated to calculate the expected effective index values for planar waveguides. Good agreement is found between experimental results and model predictions which assume that the initial Ti profile is not affected by the lower temperature Zn diffusion. Effective index enhancements as high as 0.005 and 0.003 are obtained by this method for the fundamental extraordinary and ordinary modes, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.705-708
• /
• 2008

To obtain tunnel concrete safety in case of fire, this study analyzed fire proof characteristics by fire proof method change, and the results are as follows. As a fire proof characteristics by RABT temperature heating curve, plain concrete experienced severe spalling by initial extremely high temperature. In view of fire proof method, in the cases of organic fiber mixing method and board method, spalling was prevented, and in the case of spray method, severe spalling of over 100mm depth occurred along with exposure of structural concrete including spray coat by heat stress, etc while metal lath, the stiffener, falls off. As for fire proof characteristics by RWS temperature heating curve, in case of organic fiber inclusion, concrete surface experienced fusion of within 5mm, while in the case of spray method, spray coat was severely spalled to a depth of over 100mm causing structural body concrete to expose its reinforcement, and also in the case of board method, board was fused by high temperature, causing structural body concrete be directly exposed to high temperature, which triggered overall fall-off phenomenon, so in such extraordinary high temperature heating condition, establishment of special fire proof measures is needed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.21-24
• /
• 2003

The understanding of the mechanism of device degradation has been accomplished recently, for devices using $AlQ_3$ electron transport and emitter molecule. In this presentation the experimental evidence for the degradation mechanism of $AlQ_3$ based devices will be reviewed, showing that the hypothesis of an unstable $AlQ_3^+$ cation explains a large amount of experimental data. This hypothesis, however, explains not only the room temperature device degradation in time but also sheds light on temperature stability of OLEDs. Dependence of half-life of a series of devices with an emitter layer composed of a mixture of $AlQ_3$ and different hole transport molecules (mixed emitter layer) will be discussed when they are operated at elevated temperatures. These results can also be explained in the framework of an unstable $AlQ_3^+$ species. An OLED structure containing a doped mixed emitter layer will be described, which shows extraordinary stability, half-life of 1200 hours at operating temperature of 70 C and initial luminance of 1650 $cd/m^2$. We will also discuss a novel Black $Cathode^{TM}$ OLED with reduced optical reflectivity, which is also stable at elevated temperatures. The new cathode utilizes a conductive light-absorbing layer made of a mixture of metals and organic materials.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.103-111
• /
• 1996

I followed the results of Lee and Min(1996) for classification of the months of cold and warm winter. The winter of 1992 and 1984 recorded extraordinary cold and warm. Study of the Synoptic Climatology on the January's cold and warm winter is below: (1) Climatology's characteristic. Temperature of extremely high temperature month is higher compared with extremely low temperature month. Also precipitation is more than over low temperature month compared with extremely high temperature month. (2) In circulation of 500hPa surface. (1) Extremely high temperature month At 500hPa, negative geopotential height anomalies in high latitude, three trough developed over eastern Canada. In midlatitude, a deep trough persisted in the central North Pacific and conspicuous positive height anomalies showed over northwestern Europe, Where a blocking anticyclone developed. It had been warmer than normal since last year in Korea due mainly to positive height anomalies stretched from central Siberia (2) Extremely low temperature month Appeared the strong meridional circulation and negative height anomalies showed from Far East to the Mid-Pacific and appeared ridge in the west of the North America and Atlantic. Alutien Low shows negative deviation during 1984. In northern hemisphere shows negative deviation. Therefore, we can show that the surface pressure distribution and height distribution of 500hPa level are closely connected with each other as parts of general circulation. (3) The characteristics of the general circulation pattern of the 500hPa (1) Extremely high temperature month is high than extremely low temperature month1984 in Zonal index (2) The majority type is S type in 500hPa level circulation of extremely high temperature month but extremely high temperature month is M type (3) The wave number in 500hPa all shows 3 wave. So can not distinguished by only predominant wave number pattern.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.33-35
• /
• 1988

From the study of mechanism of electrical conduction of film which is made from Polyethylene Terephthalate at very high temperature which is larger than low electric field and glass transition point, we find that there is a extraordinary non ohmic region (I∝V$^n$, 0

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.346-346
• /
• 2010

Using a novel deposition technique, which can be described as pulsed chemical vapor deposition (CVD), $TiO_2$ thin films were synthesized on carbon fibers. We show that these films exhibit extraordinary high absorption capacities of toluene vapor. Such an absorption phenomenon of toluene at room temperature was not found for other $TiO_2$ samples. We expect that $TiO_2$ thin films prepared here can be used for removing volatile organic compounds from indoor atmosphere. Structures of there $TiO_2$ films were studied by SEM and XPS, and the results are discussed.