• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2008

The purpose of this study was to develop the wireless pH telemetry lasting longer than 24 hours in the mouth to overcome the limits of conventional wire telemetry previously used for salivary and plaque pH measurement, and to assess its effectiveness. We developed a wireless pH telemeter which can measure and store the pH profile data during more than 24 hours. It was composed of intraoral part; pH sensor of antimony electrode, battery and microprocessor for data storage, and extraoral part; control/data receiver and data analyzing software which was newly made for this device. After inspecting wireless electrode for accurate measurement, it was attached to the removable intraoral appliance and delivered to the volunteer who was told to wear except brushing time, retrieved after 24 hours and finally the pH profile data was extracted and analyzed. When compared with conventional wire telemetry, this device showed similar results and induced less discomfort to examinees. The data showed pH changes at same time when examinees ate various scheduled foods and beverages. With this method it became possible to accurately measure pH changes within mouth for long time in accordance with individual's lifestyle, definitely reducing the discomfort inflicted to the examinees' life.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.677-685
• /
• 2000

Anchorage plays an important role in orthodontic treatment. Because of limited anchorage Potential and acceptance problems of intra- or extraoral anchorage aids, endosseous implants have been suggested and used. However, clinicians have hesitated to use endosseous implants as orthodontic anchorage because of limited implantation space, high cost, and long waiting period for osseointegration. Titanium miniscrews and microscrews were introduced as orthodontic anchorage due to their many advantages such as ease of insertion and removal, low cost, immediate loading, and their ability to be placed in any area of the alveolar bone. In this study, a skeletal Class II Patient was treated with sliding mechanics using M.I.A.(micro-implant anchorage). The maxillary micro-implants provide anchorage for retraction of the upper anterior teeth. The mandibular micro-implants induced uprighting and intrusion of the lower molars. The upward and forward movement of the chin followed. This resulted in an increase of the SNB angle, and a decrease of the ANB angle. The micro-implants remained firm and stable throughout treatment. This new approach to the treatment of skeletal Class II malocclusion has the following characteristics . Independent of Patient cooperation. . Shorter treatment time due to the simultaneous retraction of the six anterior teeth . Early change of facial Profile motivating greater cooperation from patients These results indicate that the M.I.A. can be used as anchorage for orthodontic treatment. The use of M.I.A. with sliding mechanics in the treatment of skeletal Class II malocclusion increases the treatment simplicity and efficiency.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.330-343
• /
• 1997

Extraoral maxillofacial prostheses are essential for restoring facial structures that are lost as a result of congenital missing, injuries from accidents, surgical treatments of head and neck cancer. Recently, silicone is the most useful material for this purpose and is more advantageous than other maxillofacial prosthetic materials. However, there are some problems for long-term usage of silicone prostheses due to tear and color change. These are major contributing environmental factors to those problems that are such as ultraviolet light, cleansing agents, changes in humidity and successive adhesion and removal. The aim of this study is to evaluate the physical properties and color changes of maxillofacial prosthetic silicone material by those environmental factors using A-2186 silicone material (Factor II, USA) and two pigments, cadmium yellow medium and cosmetic red. Aluminium molds were fabricated according to the ASTM No. D412 & D624 specifications and resulted specimens from molds were fabicated and treated as follows. Control group and experimental I group were fabricated with 0.1% wt. pigment mixing in silicone elastomer and II-1 group, II-2 group of experimental II group were fabricated with 0.2%, 0.3% wt. pigment mixing in silicone elastomer, respectively. Control group was kept in darkroom at room temperature, I-1 group was kept under natural sunlight during 1week, I-2 group was soaked in 20% soap water during 1wk. I-3 group was successively adhered and removed 200 times on inner region of arm using Daro adhesive-33. Experimental II groups were kept in darkroom at room temperature. Instron universal testing machine was used to measure the % elongation, tensile strength, tear strength of control, experimental I, II groups and reflectance spectrophotometer(COLOR EYE-3000, Macbeth, USA) was used to measure the color differences between control group and experimental I group. The results were as follows : 1. When compared with control group, natural weathering group and 20% soap-water soaking group had no significant differences in % elongation(p>0.05). 2. 200 times successive adhesion and removal group, 0.2% wt. pigment group and 0.3% wt. pigment group had significant decreases in % elongation(p<0.05). 3. Natural weathering group, 20% soap-water soaking group and 200 times successive adhesion and removal group had no significant differences in tensile strength (p>0.05). 4. 0.2%, 0.3% wt. pigment groups had significant decreases in tensile strength(p<0.05). 5. Values of all experimental groups were decreased in tear strength. and 200 times successive adhesion and removal group had significant decrease in tear strength(p<0.05). 6. Natural weathering group and 20% soap-water soaking group had significant color differences(${\Delta}E$) and it could be detectable to naked eye(p<0.05). 7. Color differences between control group and 200 times adhesion and removal group were not detectable to the naked eye (${\Delta}E<1.0$).

• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.636-643
• /
• 1999

Ectodermal dysplasia is a genetic birth defect in which at least abnormally develop two structures derived from the ectoderm. It is usually inherited in autosomal dominant or autosomal recessive pattern. Oral manifestations are oligodontia, anodontia, dysmorphic teeth(conical shape), decreased occlusal vertical dimension and alveolar bone. Extraoral signs may include decreased or absent sweat glands, sparse and fine hair, saddle nose, hearing loss and decreased production of body fluids including saliva. Most affected children require extensive dental treatment to restore their appearance and help the development of a positive self image. The patient's overclosed profile was due to a decreased vertical dimension. The use of overdenture is to preserve erupted teeth, to accomodate the newly constructed occlusal plane, to improve retention and stability of denture and to maintain the remaining alveolar bone. The restoration of vertical dimension improved the child's speech, swallowing, and eating. Growth continue until the age of approximately 18. As child grows, replacement dentures will have to be fabricated primarily to accomodate increasing vertical dimension and changing dentition. Implants may be indicated later if the alveolar bone is adequate. Periodic recall visits are advised, to monitor the dentures during periods of growth and development, and eruption of the permanent teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.53-61
• /
• 2007

In case of missing tooth caused by dental caries or periodontal disease, it can be restored by various methods, and there has been much interest in implant and tooth transplantation. The success of tooth transplantation is going to be attained through the knowledge of growth, development and calcification of tooth. Tooth transplantation has been experimented in vivo and in vitro. Many animals such as rats, mice, cats and dogs are used for tooth transplantation experiment in vivo. In most experiments, tooth was transplanted into the extraoral site, but rare into the intraoral site In this study, to observe the capacity of formation and mineralization of tooth germ, first molar of a matured white rat was extracted and the cap stage tooth germ of a 13.5 Embryonic day embryo rat was transplanted into the extracted socket. The rats were killed 6 months later and the radiographical and histological results are as followings. 1. Tooth germ transplanted for 2 and 6 months are developing calcified tooth material such as dentin, cementum, pulp tissue, and epithelium around enamel space in the maxilla was seen. 2. The epithelium around enamel space was located beneath the oral epithelium and contained connective tissue and periodontal ligament. 3. Tooth formation was progressed as transplantation period but the size of newly formed tooth was small and the shape of tooth was incomplete.

• Korean Journal of Cleft Lip And Palate
• /
• v.8 no.2
• /
• pp.63-70
• /
• 2005

Patients with cleft lip and palate usually show up maxillary hypoplasia. In these cases, a large amount of maxillary advancement is often needed to correct the severe deformity, but local soft-tissue scars around the maxilla restrict maxillary advancement and increase the relapse rate. Maxillary distraction osteogenesis is an effective method for facial and occlusal improvement in these patients. By gradually lengthening both the bones and the soft tissues, distracted midface can greatly increase postoperative stability and decrease the relapse rate. However, the maxillary extraoral appliances of the early days used were esthetically unappealing as well as difficult for the patient to manage. Recently, more inconspicuous intraoral distraction appliances have been developed and used with success. We acquired favorable result in two patients(bilateral 1 patient and unilateral 1 patient) with severe maxillary hypoplasia secondary to complete cleft lip and palate were treated with midface distraction using internal distractor (Zurich Pediatric Maxillary Distractor, KLS Martin, Tuttlingen, Germany). So, we report our experience with literatures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.173-182
• /
• 2019

Vertical facial growth triggers the rotation of mandible to move the chin point to the downward and backward direction, which showed remarkably effective result making the less prominent chin. Recently, the intraoral removable appliance utilizing class III elastic demonstrated the vertical growth trigger mechanism. The treatment change was very fast and wearing was quite easy, compared to extraoral appliances. The purpose of this study was to verify the duration of the treatment on class III malocclusion using intraoral removable appliances, which designed to accelerate vertical facial growth. 56 patients were selected with the complaint of the protruded mandible and class III malocclusion (overjet : -3 - 0 mm, overbite : 0 - 4 mm). Information like; age at start, duration of the treatment events, type of the treatment, overjet, overbite etc. was collected and calculated. The average age of the patients delivering the initial brace was $8.75{\pm}1.10year$. Most of the anterior crossbite was resolved within 6 months. The total treatment period was $21.79{\pm}10.73months$ with the additional procedures like the alignment of anterior teeth and torque control using additional removable and fixed orthodontic appliances. The correlation study showed that patient's cooperation (p = 0.000) and the use of fixed appliance (p = 0.032) were significantly influenced on treatment duration.

• Journal of Korean Academy of Dental Administration
• /
• v.9 no.1
• /
• pp.14-24
• /
• 2021

Dentists and dental hygienists are major collaborators, as expressed by the concept of "Four-handed dentistry." Dentists are guaranteed their legal duties and rights in accordance with the Medical Act, whereas dental hygienists are currently stipulated in the scope of their legal duties under the Act on Medical Technicians. However, there is a difference between the actual work and the legal work performed by dental hygienists; therefore, the work is dependent on many legal controversies and authoritative interpretations. The purpose of this study is, first, to develop a reliable questionnaire tool regarding the actual work performed by dental hygienists in dental hospitals and clinics, and second, to examine the awareness of the appropriateness of legal work based on the developed questionnaire. The target subjects of the survey were dental hygienists and dentists, and the dental hygienists were those who worked in dental hospitals and clinics as license reporters of the Korean Dental Hygienists Association. A total of 1,294 dental hygienists and 39 dentists were included in the final analysis. In the dental hygienist group, 19 items received the response "appropriate for legal work" in over 90% of cases, accounting for 25% of the total 76 items. In addition, in a total of 31 items, more than 80% of the responses were appropriate for legal work. Among them, the highest was 'Scailing' (97.7%), followed by "Extraoral-Panorama" (97.1%). In the dentist group, 10 out of 76 items showed over 90% adequacy for legal work, and among them, "instrument cleaning and sterilization" was the highest at 100%. It was followed by "Intraoral radiography," "Scailing," and "Toothpick method, TPM" with 97.4%. In the case of dentists, 28 out of a total of 76 items showed an appropriateness of more than 80% for legal work. This study comprehensively investigated the actual work of dental hygienists in line with timely and appropriate social issues and provided reliable statistics in evidence-based dentistry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.222-230
• /
• 2022

Digital technology is gradually expanding its field and has a great influence on various fields of dentistry. Recently in digital dentistry, the importance of superimposing various 3-dimensional (3D) image data is emerging, in order to utilize gathered data effectively for diagnosis and prosthesis fabrication. Integrating data from facial scans, intraoral scans, and mandibular movement recordings can create a virtual patient. A virtual patient is formed by integrating digital 3D diagnostic data such as intraoral and extraoral soft tissues, residual dentition, and dynamic occlusion, and the results of prosthetic treatment can be evaluated virtually. The patients in this case report were a 37-year-old female whose chief complaint is that the appearance of the existing prosthesis was distorted and a 55-year-old female patient whose anterior prosthesis needed to be refabricated after the endodontic treatment. 3D facial scans were obtained from each patient, and the patient's mandibular movements were recorded using ARCUS Digma 2 (KaVo Dental GmbH, Biberach an der Riss, Germany). The collected data were integrated on computer-aided design (CAD) software (Exocad dental CAD; exocad GmbH, Darmstadt, Germany) and transferred to a virtual articulator to create a digital virtual patient. The temporary fixed prostheses were designed, restored, and evaluated, and it was reflected into the final restorations. With the aid of the virtual dental patient, accuracy and predictability could be increased throughout treatment, simplifying the occlusal adjustment and clinical evaluation with improved esthetic outcomes.