• 펄프종이기술
• /
• 제43권1호
• /
• pp.83-91
• /
• 2011

Hemicelluloses are useful materials for papermaking and other biotechnological applications. To recover and further utilize the hemicelluloses, this study carried out the pre-extraction of the hemicelluloses from Korean mixed hardwoods chips using hot water and sodium hydroxide solution at various temperature and time conditions. Through the hot water pre-extraction, the wood components of 22% was extracted and the 35% of the hemicelluloses which were contained in the original wood chips were dissolved into the pre-extractives. The yield of the pre-extractives was more significantly influenced by the pre-extraction temperature than the time. The pre-extractives with the yield of 30% could be obtained by alkali pre-extraction and alkali concentration was the most important factor. It had lower hemicellulose content but high molecular weight, compared with the hot water pre-extractives.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1175-1182
• /
• 2004

Installations of vertical boreholes for the ground source heat pump system are expensive to install. One way to reduce the initial cost is to increase the specific heat extraction rate of borehole system. However, as the specific heat extraction rate increases the temperature of borehole fluid decreases with the resultant lower Coefficient Of Performance in Heating(COPH) of heat pump system. The purpose of this study is to provide the basic informations about the performance of heat pump system with the specific heat extraction rate and soil thermal properties such as thermal conductivity and temperature. It is shown that the specific heat extraction rate is the most important parameter for the ground source heat pump system. To obtain the reasonable COPH value (COPH > 3) the heat extraction rate should be about 25 W/m or less. Accurate measurements of soil thermal properties are also very important to design the system properly. The effects of borehole thermal resistances are also examined in this study.

• ETRI Journal
• /
• 제36권2호
• /
• pp.224-231
• /
• 2014

In this paper, a method to extract temperature effect information using the color temperatures of video scenes with mapping to temperature effects is proposed to author temperature effects of multiple sensorial media content automatically. An authoring tool to apply the proposed method is also introduced. The temperature effects generated by the proposed method are evaluated by a subjective test to measure the level of satisfaction. The mean opinion score results show that most of the test video sequences receive an average of approximately four points (in a five-point scale), indicating that test video sequences (with the temperature effects generated by the proposed method) enhance levels of satisfaction.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.383-386
• /
• 2006

Subsurface temperature is affected by heat advection due to groundwater advection. Temperature-depth profile can be perturbed especially when there are significant vertical groundwater flux caused by external force such as injection or extraction. This research is to clarify the change of subsurface temperature distribution when the 40m x l0m sandy aquifer is stimulated by two different vertical flux($case1:\;{\pm}10^{-5}m^3/s,\;case2:\;{\pm}4{\times}10^{-5}m^3/s$) using a program called HydroGeoSphere. The resulting temperature distribution contour map shows pumping causes vertical attraction of water from deeper and warmer place which result in rising up isotherm. Additionally more injection/extraction rate, more vertical groundwater flux leads to faster Increase in temperature near the pumping well.

• 태양에너지
• /
• 제9권1호
• /
• pp.30-35
• /
• 1989

This paper dealt with an experiments on temperature vairation in the heat storage zone due to change of vertical location (height) of sink diffuser and flow extraction in small saltless solar pond ($0.5{\times}0.5{\times}1.0M$), and the honeycomb device for this experimental purpose consisted of one-tired, sealed, and air filled by honeycomb panels. As results of experiments, 1) The storage zone was formed under lower region below the honeycomb device. 2) The higher vertical location of sink diffuser was placed, the more mixing phenomenon increased in the pond at steady flow extraction. 3) The more flow extraction increased, the more mixing phenomenon decreased at constant heat exchanger and variable flow extraction.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.63-67
• /
• 2004

A field pilot study on remediation of diesel-contaminated soil by hot air injection/extraction process constructing soil piling system was conducted to evaluate the effects of hot air on the removal of diesel and each constituent. After the heating process of 2 months, the equilibrium temperature of soil reached to 10$0^{\circ}C$ and soil TPH concentration was reduced to about 72% against the initial concentration. Additional extraction process of 2 months induced the continuous extraction of residual diesel and the increment of microbial activity, which made soil TPH concentration reduced to 95%. In addition biological removal of non volatile constituents in diesel was verified indirectly and the removal pattern of each DRO(diesel range organic) as soil temperature was explained.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.136-144
• /
• 2009

The purpose of this study is to investigate various phenomena quantitatively occurring during the course of changing dyeing conditions of cotton and silk fibers in natural dyeing using Caesalpinia sappan. Paying attention to the fact that the color may be varied according to the extraction conditions of dyestuffs in Caesalpinia sappan dyeing, the color changes were investigated after dyeing using dyestuffs extracted at elevated temperature and dyestuffs extracted at room temperature. According to the extraction methods, the degree of color development for the category of red color and the category of yellow color has changed.

• 대한화학회지
• /
• 제13권3호
• /
• pp.199-204
• /
• 1969

4f 및 5f 系列 元素의 溶媒抽出에 있어서 分配速度를 測定해 본 結果 4f 系列의 前半部와 後半部 間에 明白한 差異를 볼 수 있었다. 三價의 Am 및 Cm은 4f 系列의 前半部와 類似함을 알았다. 또한 分配率과 抽出溫度와의 關係를 檢討해 본 結果 抽出系에 따라 獨特한 增加 또는 減少傾向이 나타났으며 또한 Chelate 抽出系에 있어서는 原子番號 存在性이 있음을 알았다

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.42-47
• /
• 2024

The electrochemical extraction of uranium in ternary low melting LiCl-KCl-CsCl eutectic on inert and reactive electrodes via different electrochemical techniques was investigated. It was established that the electrochemical reduction process of U(III) ions on the inert W electrode was irreversible and proceeded in one stage. On reactive liquid Ga and liquid Cd electrodes the reduction of uranium ions took place with the considerable depolarization with the formation of UGa₂, UGa₃ and UCd₁₁ intermetallic compounds. Thermodynamic characteristics of uranium compounds and alloys were calculated. The conditions for the extraction of uranium from the electrolyte in the form of alloys on both liquid reactive electrodes via potentiostatic electrolysis were found.

• 한국융합학회논문지
• /
• 제11권2호
• /
• pp.85-91
• /
• 2020

기능성 원료로 사용되는 아로니아 열매를 포함하여 열매 이외의 비가식 부위를 이용하여 바이오 융복합 소재로의 개발을 검토하기 위하여 폴리페놀의 추출 공정변수인 추출 용매, 온도, pH, 시간 등의 추출 조건을 최적화하였다. 아로니아 부위별(열매, 잎, 가지, 송이가지)로 물, 에탄올, 메탄올을 사용하여 추출하여 총 폴리페놀 추출율이 가장 높은 물을 추출용매로 선정하였다. 비가식 부위 중 가장 높은 총 폴리페놀 함량을 보인 아로니아 잎을 폴리페놀의 주원료로 선정하였고, 실험계획법을 이용하여 비가식 부위인 잎의 폴리페놀의 열수 추출 조건을 최적화하였다. 그 결과 79.3℃, 4.5시간, pH 7.2에서 추출하는 것이 최적의 추출 조건이었으며 폴리페놀의 최대 추출 수율은 139.4±2.5 mg/g이었다. 이와 같이 아로니아 비가식 부위인 잎의 최적화된 추출조건은 기능성 바이오 소재의 생산에 활용될 수 있을 것으로 판단된다.