• Journal of Korean Academy of Nursing
• /
• v.36 no.6
• /
• pp.950-958
• /
• 2006

Purpose: The purpose of this study was to develop a critical thinking disposition scale for nursing students. Method: The developmental process was construction of a conceptual framework, development of preliminary items, verification of content validity, development of secondary items, verification of construct validity and extraction of final items. The conceptual framework and first preliminary 60 items were obtained through a review of relevant literature and the development of critical disposition scales by 10 researchers who had been studying critical thinking for one year These items were reviewed by five specialists for content validity and finally 55 items were chosen. The data was collected from October 1 to 15, 2004 and was analyzed using factor analysis and Cronbach's $\alpha$ with the SPSS program. The subjects were composed of 560 Bachelor of Science nursing students from 8 nursing schools. Result: There were 35 final items which were sorted into 8 factors. The factors were identified as 'intellectual integrity(6 items)', 'creativity(4 items)', 'challenge(6 items)', 'open-mindedness(3 items)', 'prudence(4 items)', 'objectivity(4 items)', 'truth seeking(3 items)' and 'inquisitiveness(5 items)'. The cumulative percent of variance was 55.107%. The reliability of the scale, Cronbach's alpha was.892 and the factors' ranged from.562-.836. Conclusion: The result of this study could be used for measuring critical thinking dispositions of nursing students. However, for further validity and reliability, repeated research is necessary.

• Clean Technology
• /
• v.19 no.2
• /
• pp.148-155
• /
• 2013

Volatile fatty acids (VFAs) production from marine brown algae, Saccharina japonica, was investigated in anaerobic dark fermentation. In order to evaluate the VFAs productivity, various experimental parameters (i.e., physicochemical pre-treatment, microorganism inoculation ratio, substrate concentration, and pH) were evaluated. According to the physicochemical pre-treatment methods, the maximum concentrations of VFAs were obtained in the order of sulfuric acid, subcritical water and subcritical water with lipid-extraction. Also, we investigated the operating parameters such as microorganism inoculation ratio (MV/M = 10 to 30), the substrate concentration (18.0 to 72.0 g/L) and pH (6.0 to 7.0) in sulfuric acid pre-treatment method. When the substrate concentrations were 18.0, 36.0, 54.0 and 72.0 g/L at $35^{\circ}C$, microorganism inoculation ratio 15, pH 7.0 for 372 hours, the maximum concentrations of VFAs were respectively 9.8, 13.9, 18.6 and 22.3 g/L. The change in VFAs concentrations was detected that acetic- and propionic acids increased according to increasing pH, while the butyric acid increased with decreasing pH. The VFAs obtained from concentration and separation process may be used as basic chemistry materials and bio-fuel, and they will expect to produce alternative energy of fossil fuel.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.305-314
• /
• 2017

The purpose of this study was to develop the high efficiency of ginseng by using microwave low temperature vacuum drying technology. In red ginseng manufacturing processes, the study results compared the hot-air drying red ginseng dried during 24hours in $60-70^{\circ}C$ and redried during 72hours in $40^{\circ}C$ after the steaming ginseng with the red ginseng dried in microwave low temperature vacuum dryer on condition that 900 watt, 2.45 MHz, 50 mmHg during 5 hours and redried during 2 hours on 750 mmHg after the steaming ginseng about observation of tissue, sensory evaluation and a change of ginsenoside and crude saponin content. As a result, the red ginseng in microwave low temperature vacuum was had high brightness, the surface turned into porosity tissue and added more flavor, decreased bitterness highly on the contrary increased sweetness at the same time that elevated the comprehensive preference. Moreover, In a short time, the content of ginsenosides $Rg_1$ and $Rb_1$ increased about sixfold, eightfold in one time zone but there were no wide difference in content of $Rg_3$ as compared to the hot-air drying red ginseng. Finally, content of crude saponin was increased widely at 10-20 minutes and stayed high crude saponin content consistently. Therefore, this result indicated that the red ginseng in microwave low temperature vacuum increased extraction yields of the ginsenosides and crude saponin through a change of porosity tissue and improved flavor and texture compare with the general hot air dried red ginseng in a short time. According to these results, that provided that could increase the preference about red ginseng.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.559-573
• /
• 2018

Recently, one of the most actively applied image media in the most fields such as virtual reality (VR) is omni-directional or panorama image. This image is generated by stitching images obtained by various methods. In this process, it takes the most time to extract keypoints necessary for stitching. In this paper, we analyze the parameters involved in the extraction of SIFT keypoints with the aim of reducing the computation time for extracting the most widely used SIFT keypoints. The parameters considered in this paper are the initial standard deviation of the Gaussian kernel used for Gaussian filtering, the number of gaussian difference image sets for extracting local extrema, and the number of octaves. As the SIFT algorithm, the Lowe scheme, the originally proposed one, and the Hess scheme which is a convolution cascade scheme, are considered. First, the effect of each parameter value on the computation time is analyzed, and the effect of each parameter on the stitching performance is analyzed by performing actual stitching experiments. Finally, based on the results of the two analyses, we extract parameter value set that minimize computation time without degrading.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.105-105
• /
• 2009

$ZrO_2$ is one of the most attractive high dielectric constant (high-k) materials. As integrated circuit device dimensions continue to be scaled down, high-k materials have been studied more to resolve the problems for replacing the EY31conventional $SiO_2$. $ZrO_2$ has many favorable properties as a high dielectric constant (k= 20~25), wide band gap (5~7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2/Si$ structure. In order to get fine-line patterns, plasma etching has been studied more in the fabrication of ultra large-scale integrated circuits. The relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Due to the easy control of ion energy and flux, low ownership and simple structure of the inductively coupled plasma (ICP), we chose it for high-density plasma in our study. And the $BCl_3$ included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compound In this study, the surface kinetic properties of $ZrO_2$ thin film was investigated in function of Ch addition to $BCl_3/Ar$ gas mixture ratio, RF power and DC-bias power based on substrate temperature. The figure 1 showed the etch rate of $ZrO_2$ thin film as function of gas mixing ratio of $Cl_2/BCl_3/Ar$ dependent on temperature. The chemical state of film was investigated using x-ray photoelectron spectroscopy (XPS). The characteristics of the plasma were estimated using optical emission spectroscopy (OES). Auger electron spectroscopy (AES) was used for elemental analysis of etched surface.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.89-100
• /
• 2006

The carotid intima-media thickness (IMT) is very important, because the severity of it is an independent predictor of transient cerebral ischemia, stroke, and coronary events such as myocardial infarction. The conventional image processing to measure the IMT has not been satisfactory, because the methods have relied on the manual section drawing and a regional segmentation by differential estimation. We propose a new image processing technology effective to extract features from the carotid artery image whose pixels have the directional vector properties with composed color distribution. The technique we presented here is not by differential variation but by verification of the layer properties of carotid artery image. Iterated vertical and horizontal analysis and segmentation of the IMT image show the vector characteristics. This new technique makes it possible to cluster the layers statistically, and to classify mathematical correlation between regions and resulting in correct measurements of thickness and its variation. The advantages and effectiveness of this approach are applicable to region process and character extraction of such a vector image.

• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.47-59
• /
• 1979

In order to study the morphologic changes of the unfixed odontoblasts suspended in phenol solution of several different concentrations, the author carried out the extraction of lower incisor of S-D strain rats to collect the odontoblasts, and the cells obtained were suspended immediately in saline solution. After observing the odontoblasts in fresh state, the saline solution was substituted with 0.125%, 0.25% 0.5%, 1% and 2% diluted phenol solutions. The morphologic changes were examined with phase contrast microscope at intervals of 10, 30, and 60 minutes. The results were as follows: 1. In saline solution the odontoblast showed cytoplasmic swelling, slender cytoplasmic process, thick rim nuclear membrane with increased dark contrast, and prominent nucleoli and chromatin granules with lapse of time intervals. In accordance with time intervals, blisters appeared in the supranuclear zone and increased its size and moved outward of the cytoplasmic membrane resulting detachment from the cell membrane. The phase dark cytoplasmic granules were increased in its dark contrast and in its size. 2. In 0.125% and 0.25% phenol solution, the odontoblasts and its nucleus shrunk immeidately and its contrast of cellular components was increased. With the lapse of time, the phase-dark granules in cytoplasm were aggregated, and several blisters were formed in and out of the cells. The outline of cytoplasmic membrane was also obscured. 3. In 0.5% phenol solution, the necleus shrunk at once, but soon after it revealed karyolysis accompanying dark contrast of neclear components such as nuclear membrane, nucleoli, and chromatin granules. On the contrary, the cytoplasmic granules showed aggregation and increased dark contrast, small and large blisters were formed in and out of the odontblasts and the outline of cytoplasmic membrane became obscured. 4. In 1% phenol solution, it showed shrinkage of odontblasts and its nuclei with thick rim nuclear membrane, aggregation of chromatin granules and occasional karyorrhexis. The dark contrast of cytoplasmic granules was increased and aggregated each other. But the blister formation could not be found. 5. In 2% phenol solution, it showed the shrinkage of odontoblasts and pyknotic nuclei with increased dark contrast of nucleoli and chromatin granules. The number of cytoplasmic granules was decreased by aggregation. But the blister formation could not be found as in 1% phenol solution.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.4
• /
• pp.266-270
• /
• 2007

This research was conducted to investigate antioxidant activities of Juglans mandshrica forages by the irradiation of far infrared ray during leaf drying processes before compound extraction, with its potential use for activating antioxidants. The contents of total phenolics and flavonoids in the basis of a gram leaf dry weight were maximized in 20 min at 30 V of far infrared irradiation. Total phenolic content was 25.43 mg/g in the FIR treatment, while it was 21.12 mg/g in the non-FIR treatment control. Total flavonoid content was 39.38 mg/g in the FIR treatment, while it was 32.78 mg/g in the non-FIR treatment control. The contents were decreased when the condition of far infrared ray irradiation was higher voltage and longer treatment time, exhibiting 16.93 mg/g of total phenolics and 23.78 mg/g of total flavonoids in 30 min at 50 V of far infrared irradiation. The antioxidant activities were shown to positive relationships with the contents of total phenolics and total flavonoids. In this study, we concluded that content of bioactive molecules relating antioxidant activity in Juglans mandshrica forages is optimized in 20 min at 30 V of far infrared irradiation for leaf drying process.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.121-134
• /
• 2004

This article describes a clinical protocol for the conventional rehabilitation of patient diagnosed with partial anodontia. A combined dental therapy approach was used and included endodontic therapy and root capping on the maxillary central incisors, fabrication of a maxillary overdenture, and fabrication of mandibular konus overdenture supported by 3 konus abutments. Within this protocol, tooth-supported overdenture prostheses are used for 2 purposes: first, to obtain the most rigid retention and function at an established maxillary-mandibular relationship; and second, to continuously maintain function and esthetic appearance applying immediate dentures after teeth extraction. The idea behind this protocol and its associated clinical procedures is presented along with a discussion compared with implant therapy. In the case introduced, and after 7 years of observation, the therapy can be seen as a success. We increased the occlusal vertical height in this case, but it would be more appropriate to see this as recovering the occlusal vertical height that was lost. The process of increasing the occlusal vertical height, that is restoration of the face, modification of the extrinsic occlusion of the incisors, and retraction of the mandible is very difficult and important. Ultimately, class III malocclusion is fixed, adequate occlusal vertical height is gained, and the retracted posterior anodontial portion is restored by prosthodontic dentures based on the rigid support theory. The result of the therapy done on the later-achieved malocclusion with partial anodontia on the posterior portion must consider the following in order to maintain the safety of the esthetics of the tooth and face for a period of time: 1) occlusal restoration with an ideal occlusal vertical height, 2) allowance of the final occlusion induced by the functional relationship of the upper and lower jaw, 3)final occlusion functionally induced by the lip competence limit.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.3
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.