• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.7 s.262
• /
• pp.808-815
• /
• 2007

The optical performance of the mirror fur satellite camera is highly dependent on the adhesive properties between the mirror and its support. Therefore, in order to design a mirror with high optical performance, the mechanical properties of adhesives should be well defined. In this research, the mechanical properties of three kinds of space adhesives are studied. In case of the materials which show nearly incompressible behavior such as space adhesives, it is important to measure shear modulus which governs deviatoric stress components. Also the experiment should be performed in circumstances similar to real manufacturing process of mirror, because extra factors such as size effects, the adhesion effects of primer and reactions between adhesive and primer affect the properties of adhesive regions. In this research shear moduli of the adhesives are determined by using a single lap adhesively bonded joint. For the shear tests, several temperatures have been selected from $-20^{\circ}C$ to $55^{\circ}C$ which is operating temperature range of the adhesive. In the case of linear behavior materials, shear moduli are calculated through a linear curve fitting. Shear stress-strain relation is obtained by using an exponential curve fitting for material which shows non-linear behavior. The shear modulus of each adhesive is expressed as a function of temperature. Characteristics and adaptability of the adhesives are discussed regarding their temperature sensitivity.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.33-46
• /
• 1978

To get the goal of self-supply of food grain, improvement of post-harvest grain operations in rural area is under consideration as an important task of agriculture in Korea. This is study is focused on elimination of losses and deteriorations of grain and reduction of labour requirements and funds for post-harvest grain operations. The purpose of this study are presentation of basic data referring to conventional post-harvest grain operations in rural area and suggestion of improving methods for the operations, and also finding out reasonable operating processes of the operations. The result of this study are follows; 1. Grain drying in-the-filed which is performed before threshing has major factors of grain loss during drying, and so should be restrained as possible. Combine harvesting system is recommended among other king of mechanized harvesting systems for restraining in-the-field drying and securing available labors for drying. 2. It is predicted that mechanical grain drying could be prevalent when combine harvesting is taken place. Recommended grain drier for pre-combine harvesting system and for combine harvesting system is batch-type drier and circulating -type drier, respectively. 3. As existing farm storages for grain have insufficient spaces and offer poor conditions for grain storing , it is greatly needed to build up new storage which store only grains. And it is concluded that storing grain in community common storages in desirable. 4. Power supplying system for milling machinery in local milling plants, that a large capacity prime mover supplies power to 4 to 6 kinds of milling machinery simultaeously, should be converted to a system of several small capacity prime movers supplying power to each machiner y for the purpose of reducing extra consumption of energy. 5. Governmental grain, of which Korean farms produced, should be milled and stored in the local milling plant successively for the purpose of reducing transportation fee and stroing facilities. 6. Furture post-havest grain operations-drying, storing and milling should be periormed successively in he community common plant. And average optimum processing capacity of the plant is estimated about 300 metric ton of grain every year.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.395-403
• /
• 2006

Recently constructed bridges often have long spans and simple structure details considering not only the function but other important factors such as aesthetics, maintenance, construction duration and life cycle cost. Therefore, bridges require high-performance steels like extra-thick plate steels and thermo-mechanical control process (TMCP) steels. TMCP stels are now gaining wide attention due to their weldability improved strength and toughness. Recently, SM570-TMC steel, which is a high-strength TMCP steel with a tensile strength of 600 MPa, has been developed and applied to steel structures. However, using this steel in building steel structures requires the elucidation of not only material characteristics but also the mechanical characteristic of welded joints. In this study, high-temperature tensile properties of SM570-TMC steel were investigated through the elevated temperature welded joints of SM570-TMC steel were studied through the three-dimensional thermal elasticplastic analyses on the basis of mechanical properties at high temperatures obtained from the experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2779-2785
• /
• 2009

Among the livestock, chickens are raised because of the merit ingested protein in low-priced cost of production and are primary livestock increased the consumption of meat. The factors of influencing condition, odor is the most important factor. Odor substances are ammonia, amines, hydrogen sulfide and mercaptan which come from night soil. Livestock are prevented from rearing by means of these odor substances. Though the henhouse is heated using hot air type heater in the winter season, it is ventilated for the control of odor because of the increase of odor concentration. In the present work, composite catalytic system combined the existing facilities(hot air type heater) with catalytic system was developed, it could controled odor and hazardous gas using the oxidation/reduction reaction without extra operating cost. Moreover, the purpose of this work is to develop the catalysts which are cost competitive and can maximize energy efficiency. The catalysts are noble metal(Pt-Rh) and composite transition metal(Mn) type.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1070-1075
• /
• 2009

Design sector, one of the key factors defining national competitiveness and one of the creative industry, needs multi-functional and differentiated designers as its structure has changed to knowledge-intensive industry. Design sector is now following the trend of social change through frequent exchanges and joint researches with other sectors. However, education for human resource nurturing in the sector falls far short of social demand for change. As the industry still focuses on educating modeling issue handlers, the problems of excessive supply of human resources in particular sector and imbalance of supply and demand of human resources are adding extra difficulties to the already competitive designer employment market. Against this backdrop, this study recognized that design service sector, which began to be established as a new industry sector, has potential of becoming one of the new domains of movement for designers, explained the necessity of education in the field, and specified practical contents of design work. Also, It analyzed work contents of design service sector, classified them into each stage, and presented them to use in design professional nurturing education.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.9-16
• /
• 2013

Objective: The aim of this study is to investigate a trend of human error types observed in a series of verification and validation experiments for an Advanced Control Room(ACR) equipped with Lager Display Panel(LDP), Work Station Flat Panel Display(WS FPD), list type Alarm System(AS), Soft Control(SC) and Computerized Procedure System(CPS). Background: Operator behaviors in a fully computerized control room are quite different from those in a traditional hard-wired control room. Operators in an ACR all together monitor plant status and variables through their own interface system such as LDP and WS FPD, are notified of abnormal plant status through their own list type AS, control the plant through their own SC, and follow the structured procedure through their own CPS whereas operators in a traditional control room only separately do their duty directed by their supervisor. Especially the secondary task such as manipulating the user interface of ACR can be an extra burden to all the operators including the supervisor. Method: The Reason's human error classification method was applied to operators' behavioral data collected from a series of verification and validation experiments where operators showed their plant operational behaviors under a couple of harsh scenarios using the ACR simulator. Results: As operators accustomed to the new ACR system, knowledge or rule based mistakes appearing frequently in the early series of experiments decreased drastically in the latest stage of the series. Slip and lapse types of errors were observed throughout the series of experiments. Conclusion: Education and training can be one of the most important factors for the operators accustomed to the traditional control room to be adapted to the new system and to run the ACR successfully. Application: The results of this study implied that knowledge or rule based mistakes can be reduced by training and education but that lapse type errors might be reduced only through innovative improvement in human-system interface design or teamwork culture design including a new leadership style suitable for ACR.

• Journal of Korean Critical Care Nursing
• /
• v.9 no.1
• /
• pp.66-76
• /
• 2016

Purpose: This study was conducted to examine the relationship between lateral position change and sternal complications after cardiac surgery through median sternotomy. Methods: This study was a retrospective descriptive case-control study, involving 241 patients who underwent cardiac surgery through median sternotomy. Data from October 2011 to September 2014 were collected. Results: Sternal complications (i.e. dehiscence, sternal instability, mediastinitis) developed in 33 patients (13.7%). Primary symptoms of complications were discharge and erythema, and the mean time difference from surgery to appearance of symptoms was 15 days (range, 1-138 days). The factors associated with sternal complications were cancer comorbidity (${\chi}^2=5.22$, p=.039), internal mammary artery procedure (${\chi}^2=4.16$, p=.041), and duration of extra-corporeal membrane oxygenation (p=.033). Position change was not related to incidence of sternal complications (${\chi}^2=0.14$, p=.704). Pressure ulcers appeared in 63 patients (26.1%). Mean time difference from surgery until occurrence of ulcers was 6.7 hours (range, 0-323.0 hours), but position change was started from 132.4 hours (range, 27.1-503.2 hours) after intensive care unit admission. Conclusions: These results provide baseline data to create a standard position change and activity protocol for patients after median sternotomy. Furthermore, the study could help clinical practitioners establish evidence-based nursing practices.

• Journal of the Korean Society of Costume
• /
• v.62 no.8
• /
• pp.45-54
• /
• 2012

The increase in the consumption of outdoors sportswear is not because of an increase in sales from hiking enthusiasts but rather the general public's desire to wear them as everyday clothing. We expect that the market for the outdoors sportswear will grow gradually as people feel the need to wear extra outerwear for protection from wind everyday. Furthermore, as the consumers' demands for these outerwear increase, their desire for more variety increases as well. Five prominent domestic brands were chosen for the analysis. The selection method included two factors: 1) the brands with the highest sales figures in the last five years 2) brands that were mentioned most frequently in fashion articles (i.e apparel news, fashion biz) from 2009 to 2011. the goal is to analyze each of the brands' different concepts of outerwear design so that the results from the analysis can be used to develop better more diverse products in the market and satisfy with the consumers' need. In the end we have to develop better technology and more diverse designs in order to meet the increase in consumers' need. They are interested in sportswear and functional clothing; we have to satisfy their need. for diverse selections in their outerwear and this is especially the case with consumers in their teens and twenties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.174-174
• /
• 2014

Memristor devices are one of the most promising candidate approaches to next-generation memory technologies. Memristive switching phenomena usually rely on repeated electrical resistive switching between non-volatile resistance states in an active material under the application of an electrical stimulus, such as a voltage or current. Recent reports have explored the use of variety of external operating parameters, such as the modulation of an applied magnetic field, temperature, or illumination conditions to activate changes in the memristive switching behaviors. Among these possible choices of signal controlling factors of memristor, photon is particularly attractive because photonic signals are not only easier to reach directly over long distances than electrical signal, but they also efficiently manage the interactions between logic devices without any signal interference. Furthermore, due to the inherent wave characteristics of photons, the facile manipulation of the light ray enables incident light angle controlled memristive switching. So that, in the tautological sense, device orienting position with regard to a photon source determines the occurrence of memristive switching as well. To demonstrate this position controlled memory device functionality, we have fabricated a metal-semiconductor-metal memristive switching nanodevice using ZnO nanorods. Superhydrophobicity employed in this memristor gives rise to illumination direction selectivity as an extra controlling parameter which is important feature in emerging. When light irradiates from a point source in water to the surface treated device, refraction of light ray takes place at the water/air interface because of the optical density differences in two media (water/air). When incident light travels through a higher refractive index medium (water; n=1.33) to lower one (air; n=1), a total reflection occurs for incidence angles over the critical value. Thus, when we watch the submerged NW arrays at the view angles over the critical angle, a mirror-like surface is observed due to the presence of air pocket layer. From this processes, the reversible switching characteristics were verified by modulating the light incident angle between the resistor and memristor.

• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.207-213
• /
• 2013

Purpose: Traumatic pancreas injuries are rare conditions that result in high morbidity and mortality. Thus, early diagnosis and intervention are very important to manage pancreatic injuries. The purpose of this study is to review the management and outcomes of the pancreatic injuries in the Korean population. Methods: Original articles published from January 2001 to December 2012 and addressing the Korean population were selected by using indices such as 'pancreas injury', 'traumatic pancreas injury', and 'pancreatic trauma' to search KoreaMed and PubMed. Nine reports were selected to review the management options for surgery or endoscopic retrograde cholangio-pancreatography. We assessed the injury mechanisms, injury severities, associated injuries, types of operation, and outcomes. Results: Two hundred fifty of the 332 patients included in the 9 selected reports were men, and the mean age of all patients was 36.4 years. The main injury mechanism was traffic accidents(65.6%). Most patients had grade II or III injuries(68.9%). The most common extra-pancreatic injury site was the liver, followed by the chest and spleen. Operative management, including distal pancreatectomies(129), drainage procedures(64), pancreaticoduodenectomies(23), and others(60), was used for 276 patients. The reported mortality rate was 10.2%, and the morbidity rate ranged from 38% to 76.9%. The average length of hospital stay was 39.5 days. Risk factors for mortality were amount of transfusion, injury severity, base deficit, age, and presence of shock. Conclusion: In this study, we found neither significant data nor a consensus. If national guidelines are to be developed and established, a national data bank or registry, and nationwide data collection are required.