• 조명전기설비학회논문지
• /
• 제21권3호
• /
• pp.117-124
• /
• 2007

요즈음과 같은 고유가 시대에 대두되고 있는 분야인 에너지 절감과 관련하여, 본 논문에서는 대단위 전력 수용가 내부의 저압배전 시스템을 특고압으로 변경할 때의 전기에너지의 손실절감에 대해 논하였다. 현재 대수용가에서는 특고압을 수전하여 저압으로 강압하여 각 부하에 전압선로로 전력을 공급하는데, 그 대신에 본 논문에서는 수전한 특고압을 수용가내의 개별 부하 근방까지 직접 가져오고 여기서 저압으로 변환하여 짧은 거리에 위치한 부하들에 전력을 공급할 때 소요되는 대략적인 설비비, 공사비의 증가금액과 선로의 전력손실 감소에 의한 절감 금액을 계산하였다. 또한 초기투자비의 회수 기간을 산정함으로 특고압 배전시스템의 경제성에 대하여 간략히 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.112-115
• /
• 2002

The effects of processing aids(P.A.) in semicoductive compounds(S.C.) with highly loaded carbon black for extra high voltage cables were investigated. The processability of S.C. is improved as the contents of P.A. increased, however, the electrical, mechanical properties and smoothness of S.C. grew worse, especially for the S.C. which contains 5wt% of P.A., the volume resistivity after heat cycle which shows long term reliability increased about three times after 15cycles compared to the S.C. which contains no P.A. We inferred that it is caused by the action of P.A. as the insulating sites, thermal expansion of polymer matrix which leads the length between carbon blacks to shorten, and the decrease of degree of crosslinking. The change of ion contents which means cleanliness of S.C. is not occured regardless of the addition of P.A.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.155-160
• /
• 2005

This paper addresses the discharge characteristics of cross-linked polyethylene according to void by the Weibull function. It analyzes discharge number and amount of discharge using Weibull distribution to identify the inter-relationship between partial discharge and defect. We detected a 10 second discharge. The applied voltage increased by 1 [kV] at discharge inception voltage. As a result, in a no-void specimen, the shape parameter was consistent according to the increase of voltage, whereas, in a void specimen, it increased according to the increase of voltage. As the result, the shape parameter expressed a fixed value at no-void specimen. However, in void specimen, according to increasing voltage shape parameter rapidly increases.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.391-396
• /
• 2001

The purpose of this study is to investigate the effect of hole or crack on the Insulation characteristics of a PET films for EHV(Extra High Voltage) VT winding. The hole or the crack in the PET films was made and the insulation characteristics of them were measured. Ad an experimental result, it was shown hat he PDIV(Partial Discharge Inception Voltage) and the BDV(Breakdown Voltage) of the PET films with hole or crack were lower than those without them, and were markedly dependent on their position and temperature. Therefore, the hole and the crack affected to insulation characteristics of PET films for SF$_{6}$EHV(Extra High Voltage) VT Winding.g.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.11-13
• /
• 2019

This paper proposes a novel high step-up non-isolated DC-DC converter, suitable for regulating dc bus in various inherent low voltage micro sources especially for photovoltaic (PV) and fuel cell sources. This novel high voltage Non-isolated Boost DC-DC converter topology is best replacement, where high voltage conversion ratio is required without the transformer and also need continuous input current. Since the proposed topology utilizes the stack-based structure, the voltage gain, and the efficiency are higher than other conventional non-isolated converters. Switches in this topology is easier to control since its control signal is grounding reference. Also, there is no need of extra gate driver and extra power supply for driver circuit, which reduces the cost and size of system. In order to show the feasibility and practicality of the proposed topology principle operation, steady state analysis and simulation result is presented and analyzed in detail. To verify the performance of proposed converter and theoretical analysis 360W laboratory prototype is implemented.

• 조명전기설비학회논문지
• /
• 제21권3호
• /
• pp.50-55
• /
• 2007

전기로를 포함하는 비선형 부하를 가진 규모가 큰 제철소는 특고압 수용가이다. 이득 비선형 부하는 고조파 전류를 발생시키고, 전력계통의 전압을 왜곡시킨다. 고조파 측정결과로 고조파는 시간에 따라 변하는 특성을 가지고 있었다. 시간에 따라 변하는 고조파를 해결하기 위해 쓰이는 가장 보편적인 방법은 누적확률을 사용하는 것이다. 본 논문에서는 전기로 부하의 시간에 따라 변하는 고조파를 국제 고조파 기준인 IEC 61000-3-6, IEEE 519와 JIS C 61000-3-2에 의해 평가하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1704-1706
• /
• 2002

With increasement of use in electricity energy, quality of electric apparatus has been recognized as important factor in distribution and transmission line. Especially In laboratories, lightning and switching impulse performances of electric apparatus have been carrying out by impulse voltage generator (IVG), simulated into lightning and switching surge circuit. In this paper, we describe triggering system of impulse voltage generator(IVG) for extra high voltage, which has been newly designed.

• 전기학회논문지P
• /
• 제61권2호
• /
• pp.82-86
• /
• 2012

Recently, due to the expansion of electric power demands, nonlinear load such as converters and inverters connected to the electric power distribution system, and extensive application of harmonic generation sources with power electric devices, disturbance of the electric power system and its influences on industries have been continuously increasing. In this research, power quality was analyzed for 11 extra-high voltage customers by considering voltage unbalance condition, power factor, THD and TDD. This research will be utilized as fundamental data to improve power quality for power utility.

• 전기저널
• /
• 12호통권132호
• /
• pp.38-46
• /
• 1987

• 전기저널
• /
• 4호통권124호
• /
• pp.41-48
• /
• 1987