• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.23-33
• /
• 2008

Extra dosed bridge among the Cabled-stayed bridges have been increasingly built in korea in recently. But such bridges were often damaged by fire due to car collison. In this study Extra dosed bridges among the cabled-supported bridges are selected to analysis model frequently to be designed and/or constructed in recent and furture in this study. COSMOS FloWorks 2007 software are used for Heat Transfer Analysis and Thermal Stress Analysis. The safety of wire, HDPE pipe and stainless steel pipe are investigated. In the case of the constant of the temperature of the heat source, the significant three variables for the analysis are selected for study : (1) the distance between the fire-proof bulk head and the heat source, (2) wind velocity, (3) the height of the end of Stainless steel pipe.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.220-226
• /
• 2016

Because MS(Multi-Strand) cables consist of many strands, a jacking force is applied to each strand one by one for cable construction. All strands should have an equal tensile force when the last one is wedged. This is the core technology for MS iso-tensioning. In this study, a new MS cable iso-tensioning system was developed for controlling and jacking the high-strength strands, with an ultimate tensile strength of 2,200MPa, for a stay cable of extra-dosed/cable-stayed bridges. The newly developed iso-tensioning system consists of electrical resistance load cells, hydraulic jacking devices, hydraulic pumps, and integrated controllers. Moreover, it is embedded with an algorithm that can control and predict the variations in tensile forces of the Master and Slave strands in real time. Actual experiments were carried out to verify the function and performance of the newly developed system. This system was applied successfully to the stay cable construction of 2nd Tae-in extra-dosed bridge in Gwangyang.

• Computational Structural Engineering
• /
• v.27 no.3
• /
• pp.49-54
• /
• 2014

• KSBB Journal
• /
• v.25 no.5
• /
• pp.478-482
• /
• 2010

Inhibitory melanogenesis by Bambusae caulis in Teaniam (Phyllostaachys nigra var. henonis Stapf) was studied. Tyrosinase inhibition activities were evaluated with six different extracts. Among them the extract with methanol showed the highest tyrosinase activity inhibition. MTT assay with B16 melanoma showed that the extract was not toxic up to the concentration of 50 ppm. The melanogenesis was clearly inhibited by the extract when it was examined by the melanin content assay in the cell. When the extract was dosed as 10 ppm, the melanogenesis was reduced to 68% in culture medium and 74% in the cell. By the proteome analysis with 2-D electrophoresis, 171 protein spots were found in the control gel and 282 spots were detected in the sample gel. Among 120 spot proteins matched, 12 spots were identified as proteins involved in the melanogenesis mechanism.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.70-83
• /
• 2005

By supplying air intermittently in various mode, the effects of oxic/anoxic time ratio and air scrubbing in aeration condition on the membrane flux and permeability were investigated. When suction pump stops, vacuum pressure remains inside the suction pump. Therefore, the effect of remaining vacuum pressure in the suction pump on fouling of membrane was investigated. The effect of EPS (Extra cellular Polymeric Substance) which is generated due to the long SRT and high concentration of MLSS and the dose of coagulant on the membrane were also investigated. The suitable oxic/anoxic time ratio for the best removal efficiency of organic matter and nitrogenous matter was 40 minutes (Oxic) : 20 minutes (Anoxic). At this time ratio, alum was dosed into the aeration tank. The result of dosing alum was that the concentration of alum solution might affect nitrification and denitrification. To remove 1 mg/L of phosphorus in MBR process, it needs 0.75 mg/L of alum solution.