• KSBB Journal
• /
• 제26권4호
• /
• pp.333-340
• /
• 2011

In this study, gemcitabine-loaded methoxy poly(ethylene glycol)-b-poly(L-lactide) (MPEG-PLLA) microparticles with different PEG block lengths were prepared by a W/O/W double emulsion technique. The present study focuses on the investigation of the influence of various preparative parameters such as the ratio of internal water phase and oil phase, polymer concentration, solvent composition of organic phase and salt concentration of external water phase on the morphology and encapsulation efficiency of the microparticles. The microparticles fabricated at high volume ratios of internal water phase to oil phase and at high polymer concentrations showed a relatively high encapsulation efficiency and low porosity. When a dichloromethane/ethyl acetate mixture was used as solvent, both the encapsulation efficiency and drug loading of the microparticles decreased as the level of ethyl acetate increased. The addition of a salt (NaCl) to the external water phase significantly improved the encapsulation efficiency up to 40%, and the microparticles became more spherical with their size and porosity decreased.

• 한국자원식물학회지
• /
• 제16권1호
• /
• pp.61-73
• /
• 2003

한국산 용담과 식물중, 덩굴식물인 좁은잎덩굴용담속과 덩굴용담속에는 각기 1분류군씰 분포한다. 이에 대한 외부형태학적 형질을 재검토하였으며, 줄기, 잎, 자방, 악, 자방의 횡단면, 주두, 잎표피, 주맥표면, 화관열편 표면, 밀선, 종피와 화분의 형태를 조사하여 두 속간의 한계 와 유연관계를 재검토하고자 하였다. 두 분류군의 식별형질로는 주로 열매형질(삭과와 장과), 부화관의 유무와 화분형 질(망상과 유선상)로 의존해 왔으나, 조사결과 외부형태형질(뿌리, 잎, 꽃받침, 주두, 약)과 내 부형태형질(꽃받침, 자방) 그리고 미세구조(화피열편의 표면, 잎의표면, 주맥의 표면, 종피)에서도 커다란 차이를 보였다. 두 분류군의 분포는 한반도 육지역에 분포하는 것은 전부 좁은잎덩굴용담이었고 덩굴용담은 해양성기후대인 제주도와 울릉도에서만 발견되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.646-648
• /
• 2008

The multi-films of a metallic film and a transparent conducting oxide (TCO, indium-tin oxide, ITO) film were formed on the stainless steel 316 and 304 plates by a sputtering method and an E-beam method and then the external metallic region of the stainless steel bipolar plates was converted into the metal nitride films through an annealing process. The multi-film formed on the stainless steel bipolar plates showed the XRD patterns of the typical indium-tin oxide, the metallic phase and the metal substrate and the external nitride film. The XRD pattern of the thin film on the bipolar plates modified showed two metal nitride phases of CrN and $Cr_2N$ compound. Surface microstructural morphology of the multi-film deposited bipolar plates was observed by AFM and FE-SEM. The electrical resistivity of the stainless steel bipolar plates modified was evaluated.

• 농업과학연구
• /
• 제27권1호
• /
• pp.20-24
• /
• 2000

External morphological characteristics of male and female of Degeeria separata, which was endoparasited in adult of the Asian ladybird, were studied by using the scanning electron microscopy (SEM). The antenna of Degeeria separata was consisted of three segment and arista. Aristae were about $750{\mu}m$ length and $30{\mu}m$ in diameter. The surface of antennae was covered with many sensilla. They were long or short, slender or thick, and straight or curved. Each three morphological types of sensilla were observed on the second and third segment of antennae. The mouthpart was sponging type. It was consisted with clypeus, labellum, labium, labrum, and maxillary palp. The labellum is $400{\mu}m$ width and double folded vertically. The leg consist of tarsus, tarsus claw, pulvilli, and empodium.

• Plant Resources
• /
• 제3권3호
• /
• pp.211-218
• /
• 2000

Intraspecific genetic relationship of 19 variation types of the Yam (Dioscorea alata) classified by their external morphological characteristics such as leaf and tuber shape were assessed by DNA using random and specific primer. Twenty two out of 113 primers (100 random[10-mer] primers, two 15 mer [M13 core sequence, and (GGAT)$_4$ sequence]) had been used in PCR-amplification. Only 12 primers, however, were success in DNA amplification in all of the analyzed plants, resulting in 93 randomly and specifically amplified DNA fragments. The analyzed taxa showed very high polymorphisms(69 bands, 71.0 %), allowing individual taxon to be identified based on DNA fingerprinting. Monomorphic bands among total amplified DNA bands of each primer was low under the 50%. Similarity indices between accessions were computed from PCR(polymerase chain reaction) data, and genetic relationships among intraspecific variations were closely related at the levels ranging from 0.66 to 0.90. These DNA data were not matched well with those of morphological characters since they were divided into two major groups at the similarity coefficient value of 0.70. Therefore, Grouping of species into variation types by mainly morphological charactistics was suggested unreasonable.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.138-141
• /
• 2002

The channel of the superconducting Flux Flow Transistor has been fabricated with plasma etching method using ICP. The ICP conditions were 700 W of ICP power, 150 W of rf chuck power, 5 mTorr of the pressure in chamber and 1:1 of Ar : $Cl_2$, respectively. The channel etched by plasma gas showed superconducting characteristics of over 77 K and superior surface morphology. The critical current of SFFT was altered by varying the external applied current. As the external applied current increased from 0 to 12 mA, the critical current decreased from 28 to 22 mA. Then the obtained $r_m$ values were smaller than $0.1\Omega$ at a bias current of 40 mA. The current gain was about 0.5. Output resistance was below $0.2\Omega$.

• Animal cells and systems
• /
• 제14권3호
• /
• pp.213-219
• /
• 2010

Bottlenose dolphins (Tursiops sp.) commonly inhabit Korean waters, including the coastal waters of Jeju Island. However, their taxonomic position was unclear because of the validity of this genus. The genus Tursiops has recently been determined to comprise two species: the common bottlenose dolphin (Tursiops truncatus) and the Indo-Pacific bottlenose dolphin (Tursiops aduncus). To confirm the taxonomic position of bottlenose dolphins frequenting the coastal waters of Jeju Island, the external morphology and osteology of specimens from Jeju Island were examined. Photographs of free-swimming individuals were also used for determining external morphological characters. The cranial and meristic measurements fell within the ranges of T. aduncus. Osteological ratios were also consistent with those of T. aduncus. The presence of a prominent ventral spot was observed among some individuals. As a result, the dolphins mainly distributed in the coastal waters of Jeju Island were identified as Indo-Pacific bottlenose dolphins (T. aduncus) in terms of their cranial characters and ventral spotting. We propose a new Korean name, 'Nambang-keun-dol-go-rae'.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.15-24
• /
• 2021

In this paper, to analyze the types of surface morphology error according to factors that cause machining error, the experiments were conducted in the ultra-precision diamond machine using a diamond tool. The factors causing machining error were classified into the pressure variation of compressed air, external shock, tool errors, machining conditions (rotational speed and feed rate), tool wear, and vibration. The pressure variation of compressed air causes a form accuracy error with waviness. An external shock causes a ring-shaped surface defect. The installed diamond tool for machining often has height error, feed-direction position error, and radius size error. The types of form accuracy error according to the tool's errors were analyzed by CAD simulation. The surface roughness is dependent on the tool radius, rotational speed, and feed rate. It was confirmed that the surface roughness was significantly affected by tool wear and vibration, and the surface roughness of Rz 0.0105 ㎛ was achieved.

• ALGAE
• /
• 제37권1호
• /
• pp.33-47
• /
• 2022

Two new species of Pseudostaurosiropsis are described based on material collected from rivers in southern United States of America, P. californicus sp. nov. and P. elaboratus sp. nov. Both species have specific characters that set them apart from taxa currently ascribed to the genus. Pseudostaurosiropsis californicus sp. nov. has lanceolate valves with subrostrate, broadly rounded apices, an axial area at the same level as the virgae in internal and external views and both are at the same level as striae in external view, the spine tips are dentate and their growth is produced by filamentous extensions, and it has equal-sized apical pore fields on both valve extremes. On the other hand, P. elaboratus sp. nov. has heavily silicified valves, the virgae are slender than the striae in outer view and wider in inner view, it only has a single, externally occluded apical pore field on one valve extreme, and the spines have a solid core. All species within Pseudostaurosiropsis are contrasted with one another and unique features are described for each based on literature and newly collected image data from type material. The genus is reconsidered and two distinguishing features are recognized: rotae externally occluding the areolae and areolae that are funnel-shaped. These features are contrasted with those in other genera and additional published species that should be included in Pseudostaurosiropsis are discussed.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.193-197
• /
• 2012

Oxygen plasma has been treated on the surface of indium-tin-oxide (ITO) to improve the efficiency of the organic light-emitting diodes (OLEDs) device. The plasma treatment was expected to inject the holes effectively due to the control of an ITO work-function and the reduction of surface roughness. To optimize the treatment condition, a surface resistance and morphology of the ITO surface were investigated. The effect on the electrical properties of the OLEDs was evaluated as a function of oxygen plasma powers (0, 200, 250, 300, and 450 W). The electrical properties of the devices were measured in a device structure of ITO/TPD/Alq3/BCP/LiF/Al. It was found the plasma treatment of the ITO surface affects on the efficiency of the device. The efficiency of the device was optimized at the plasma power of 250 W and decreased at higher power than 250 W. The maximum values of luminance, luminous power efficiency, and external quantum efficiency of the plasma treated devices increase by 1.4 times, 1.4 times, and 1.2 times, respectively, compared to those of the non-treated ones.