• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.

• Journal of Korean Medical classics
• /
• v.32 no.2
• /
• pp.71-92
• /
• 2019

Objectives : To examine various ways non-glutinous rice has been applied in different formulas of "Shanghanlun" and the relationship between non-glutinous rice and the formulas' effects. Methods : First, texts that included non-glutinous rice were selected from the "Shanghanlun". Then, they were categorized according to the application of non-glutinous rice, followed by analysis of its relationship with each formula. Results : Most formulas that used non-glutinous rice in raw form when decocting with other ingredients included Shigao. Non-glutinous rice alleviates coldness of Shigao as in the case with Taohuatang where it stops diarrhea. Non-glutinous rice used in Wumeiwan warms the center and boosts Qi and helps the medicinal ingredients to bind when made into pellets. In Guizhitang and Lizhongwan, non-glutinous rice assists Stomach Qi. In Shizaotang, porridge is taken after diarrhea to help quick recovery. To prevent damage of Zheng Qi, Baisan can be mixed with rice water for administration. The level of cathartic effect can be managed through giving cold or hot porridge to the patient according to his/her response to the medicine. Mazirenwan, Mulizexiesan, Banxiasan, Sinisan, Wulingsan are mixed in rice water for administration. It makes it easier to swallow than when mixed with plain water. The application of rice flour is either internal or external. In Zhufutang, where rice flour is parched, it harmonizes the center and stops diarrhea. In Daqinglongtang when there is too much perspiration, warm powder is sprinkled on the skin to stop sweating. Clear porridge in Jiuziyisifang and rice flour in Shechuangzisan were exclusive to "Jinguiyaolue", while Baisan and rice water mixture could only be found in "Shanghanlun". Conclusions : The excavation and research on various ways non-glutinous rice was applied in treatment holds certain meaning in contemporary practice of Korean Medicine where treatment leans heavily on medicinal treatment rather than food, and all ingredients are boiled together in large quantities for most decoctions.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3824-3836
• /
• 2021

Workers' safety from radiological exposure in a 1 ton/day capacity spent resin treatment facility was evaluated according to the operating times and outflow rate due to process related leakages. The conservative annual dose based on the operating times of the workers exceeded the dose limit by at least 7.38E+01 mSv for close work. The realistic dose range was derived as 1.62E+01 mSv-6.60E+01 mSv. The conservative and realistic annual doses for remote workers were 1.33E+01 mSv and 3.00E+00 mSv respectively, which were less than the dose limit. The MWR was identified as the major contributor to worker exposure within the 1 h period required for removal of radioactive materials. The dose considering both internal and external exposures without APF was derived to be 1.92E+01 mSv for conservative evaluation and 4.00E+00 mSv for realistic evaluation. Furthermore, the dose with APF was derived as 7.27E-01 mSv for conservative evaluation and 1.51E-01 mSv for realistic evaluation. Considering the APF for leakage from all parts, the dose range was derived as 1.25E+00 mSv-2.03E+00 mSv for conservative evaluation and 2.61E-01 mSv-4.23E-01 mSv for realistic evaluation. Hence, it was confirmed that radiological safety was secured in the event of a leakage accident.

• Conservation Science in Museum
• /
• v.29
• /
• pp.65-80
• /
• 2023

This study investigated seven specimens of lead-glazed paving bricks in order to identify the materialistic characteristics of the lead glaze used for paving bricks during the late Unified Silla period in Korea. The samples were excavated from the Beopgwangsa Temple site, Pohang. As a result of observing the surface and cross-section of the glaze with a microscope, the study confirmed that the lead glaze demonstrates various traits of hydration, which were classified into four layers: Surface layer, hydration layer A, hydration layer B, and green layer. After measuring the composition of each layer with SEM-EDS analysis, the green layer was found to have been less affected by the external environment, which renders it highly reasonable to view the green layer as the original composition of the lead glaze. The green layer is a low-temperature glaze composed mainly of PbO and SiO₂ at a ratio of 8:2, with approximately 2% CuO acting as the main colorant. Comparing the green layer composition with those from Gyeongsang-do, it was confirmed that the mixture ratio of lead glaze materials was similar to other sites such as the Sacheonwangsa Temple site, the Cheonryongsa Temple site, and the Buseoksa Temple site.

• Journal of Fashion Business
• /
• v.27 no.3
• /
• pp.35-49
• /
• 2023

The purpose is to derive its aesthetic characteristics by objectifying the visual image of the YouTube campaign into adjectives. As a result, we intend to identify advertising strategies that use them as basic data for setting fashion design concepts. A group of experts in fashion majors watched each of them, wrote adjectives, and collected 75 adjectives. By analyzing the frequency of adjectives, aesthetic characteristics were derived with adjectives recording the upper number of times, and the results were obtained that they had the characteristics of deconstruction. The conclusions of this study are as follows. First, Tamburin's Jenny appeared to be strange, scary, rambling and charming. Among the internal meanings of deconstruction due to spatial, social, and psychological distance from consumers, it can be said that T.P.O's mutual textuality and play of interaction. Second, Gucci Cruise be chosen rural, strange, wild, unharmonious, and difficult, which is a mixture of intertextuality and play of T.P.O. Third, The Excise Gucci Campaign parodies that juxtaposes six films directed by Stanley Kubrick, making them strange, retro, difficult, interesting, and wrong. Deconstructionist de-genre and de-boundary Fourth, Kenzo World is weird, dynamic, wrong, difficult, difficult, and confused, which correspond to T.P.O's interactive textuality, play of the second half, and destruction and decomposition among the external expressions of deconstruction. Fifth, Burberry Hero emphasized the aesthetic value of traditional men, so it was ostensibly wild, free, powerful, sensual, and fantastic. Compared to the lifestyle of men who usually work at work, this corresponds to play of second best.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.379-385
• /
• 2005

This study was conducted to find out a useful bioremediation technology for heavy metal contaminated soil and water. We isolated strain CPB from heavy metal contaminated soil and evaluated the tolerance level and adsorption capacity of strain CPB to heavy metals (Strain is not determined yet). Strain CPB showed variable tolerance limit to different kinds heavy metal or concentrations of heavy metals. The growth of strain CPB was significantly inhibited by mixed heavy metals (Cd+Cu+Pb+Zn) than that of by single heavy metal. Strain CPB showed high binding capacity with Pb (Pb>Cd>Cu>Zn). In general, strain CPB showed high uptake of heavy metals such as Pb, Cd and Cu. It was observed that the capacity of heavy metal uptake from mixture of heavy metals was reduced in comparison with single heavy metal treatment. But total contents of heavy metal bound with cell in mixed heavy metal showed higher than in single heavy metal treatment. Heavy metal adsorption in cells was affected by several external factors, such as temperature and pH etc.. The optimum temperature and pH of the adsorption of heavy metal into cells were ca. $25{\sim}35^{\circ}C$ and pH ca. $5{\sim}7$, respectively. A large number of the electron dense particles were found mainly on the cell wall and cell membrane fractions, which was determined by transmission electron microscope. Energy dispersive X-ray spectroscopy revealed that the electron dense particles were the heavy metal complexes the substances binding with heavy metals.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.79-86
• /
• 2009

We successfully fabricated C-doped ex-situ $MgB_2$ wires using two different methods such as mechanical alloying(MA) and combined process(CP) of in-situ and ex-situ. In the MA, the precursor powder was prepared with a mixture of $MgB_2$ and 1 at% C powders by planetary ball milling for 0-100 h. In the CP, on the other hand, C-doped $MgB_2$ powder was prepared with Mg, B, and C powders by in-situ process via compaction, sintering, and crushing. The powders prepared by two methods were loaded into Fe tube and then the assemblages were drawn by a conventional powder-in-tube technique. The MA treatment of C-added $MgB_2$ decreased the particles/grains size and resulted in C-doping into $MgB_2$ after sintering, improving the critical current density($J_c$) in high external magnetic field. For the C-doped $MgB_2$ wire by MA for 25 h, the $J_c$ was $4.1{\times}10^3A/cm^2$ at 5 K and 6.4 T, which was 5.9 times higher than that of pure and untreated $MgB_2$ wire. The CP also provided C-doping into $MgB_2$ and improved the $J_c$ in high magnetic field; the C-doped $MgB_2$ wire fabricated by CP exhibited a $J_c$ being 2.3 times higher than that of the ex-situ wire used commercial $MgB_2$ powder at 5 K and 6.0 T($2.7{\times}10^3A/cm^2\;vs.\;1.2{\times}10^3A/cm^2$).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.498-510
• /
• 2001

Distraction osteogenesis refers to the biological process responsible for new bone formation between bone segments by gradual distraction after osteotomy. For the past several years, various inconveniences including a protracted consolidation period that requires patients to wear a distractor frame longer, as well as higher medical costs, have not been remedied by improvements in osteotomy, distraction rate and monitoring system. Furthermore, side effects such as pin tract infections and soft tissue swelling may arise due to the long treatment period. These drawbacks form the rationale of this study which purports to seek a method by which the consolidation period can be reduced. This paper examines how platelet-rich plasma(PRP), known to facilitate osteogenesis, influences bone formation when applied in distracted area. Ten mongrel dogs, which were made to wear external distractor frames after osteotomy in both sides of the mandible, were used as subjects. After a 7day period of latency, distraction was carried out at a rate of 1mm/day for 14 consecutive days. After the onset of distraction, 2ml of PRP and a mixture of calcium gluconate and thrombine were injected into the center of the distracted callus on the left side of the mandible. The left was injected with PRP while the right side was set as the control site without PRP treatment. Execution at the onset of distraction and in 2 weeks, 4 weeks and 8 weeks after the consolidation period, clinical and radiographic tests, bone mineral density examination, histological examination and histomorphometric analysis were conducted to compare both sides. The results are summarized as follows: 1. Based on the clinical examination at two weeks, more remarkable cortical bone formation was found on the buccal and lingual side of the distracted area in the PRP treatment site than in the control site. No visual difference was found between the PRP treatment site and the control site at four eight weeks. 2. Based on the radiological examination, a distinct increase in the radiopaque appearance of the PRP treatment site was revealed at two weeks, but this increase appeared to slow down at four and eight weeks. 3. Examination of bone mineral density revealed a significant difference at two weeks with the PRP treatment site yielding density two times higher than the control site. This difference lessened after four weeks, and disappeared at eight weeks. 4. The histomorphometric examination revealed that about 20% more bony trabeculae area(20%, higher) was formed in the PRP treatment site than in the control site. In conclusion, it can be said that PRPs effect on stimulating bone formation in the PRP treatment site manifest as early as two weeks. Trabeculae formation likewise increased throughout the whole period. If this result can be applied to humans, the consolidation period can be reduced by injecting PRP into the distracted area.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.337-342
• /
• 1989

Gasless combustion is a vigorous exothermic reaction ignited directly in solid mixture, similar to Thermit reaction. The gasless combustion synthesis has the advantages of rapid processing, energy saving, low processing cost, and high purity of products. The Ti$Si_x$(x = 0.6, 0.8, 1.0, 2.0) systems are prepared by the gasless combustion synthesis without external sintering process. The crystallographic structures of $Ti_5Si_3$, $Ti_5Si_4$ are hexagonal and tetragonal system, respectively. Those of TiSi, $TiSi_2$ are orthorhombic systems. The results of X-ray analysis agree with the JCPDS data. The combustion modes of all combustion reactions are steady state combustions, and the propagation velocities of the combustion waves of $Ti_5Si_3$, $Ti_5Si_4$ and TiSi are greater than 0.6 cm/sec and that of $TiSi_2$ is 0.28 cm/sec.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.87-93
• /
• 2001

Pressure-balanced external Ag/AgCl electrode has been extensively used for both Pressurized Water Reactor (PWR) and Boiling Water Reactor (PWR) environments. The use of KCI-based buffer solution often becomes the source of electrode potential drift due to slow leakage through its porous plug, typically made of zirconia. It is reported that results of our effort to improve the stability of electrode potential by using high purity water as the filling solution in which $Cl^-$ ion activity can be established and maintained at the solubility of AgCl even with the sustained leakage for a long period. Stability tests have been made in boron and lithium mixture solution at $288^{\circ}C$. The electrode potential remained stable within 10 mV over one week period. And after a thermal cycle between 288 to $240^{\circ}C$ the potential shift of Ag/AgCl electrodes did not exceed 15 mV By using the limiting equivalent ionic conductances and Agar's hydrodynamic theory, the thermal liquid junction potential (TLJP) of the electrode has been predicted. The calculated values for the water-fiued Ag/AgCl electrode potential, in which the chlorine concentration in the filling solution was derived from the measured data at ambient temperature, had a good agreement with the experimental values.