• Steel and Composite Structures
• /
• v.43 no.1
• /
• pp.1-17
• /
• 2022

The free and forced nonlinear dynamic behaviors of Porous Functionally Graded Material (PFGM) plates are examined by means of a High-Order Implicit Algorithm (HOIA). The formulation is developed using the Third-order Shear Deformation Theory (TSDT). Unlike previous works, the formulation is written without resorting to any homogenization technique neither rule of mixture nor considering FGM as a laminated composite, and the distribution of the porosity is assumed to be gradually variable through the thickness of the PFGM plates. Using the Hamilton principle, we establish the governing equations of motion. The Finite Element Method (FEM) is used to compute approximations of the resulting equations; FEM is adopted using a four-node quadrilateral finite element with seven Degrees Of Freedom (DOF) per node. Nonlinear equations are solved by a HOIA. The accuracy and the performance of the proposed approach are verified by presenting comparisons with literature results for vibration natural frequencies and dynamic response of PFGM plates under external loading. The influences of porosity volume fraction, porosity distribution, slenderness ratio and other parameters on the vibrations of PFGM plate are explored. The results demonstrate the significant impact of different physical and geometrical parameters on the vibration behavior of the PFGM plate.

• New & Renewable Energy
• /
• v.19 no.2
• /
• pp.1-12
• /
• 2023

In this study, an efficient one-dimensional model was developed for predicting microchannel steam/methane reformers with thin washcoat catalyst layers with a focus on low-pressure reforming conditions suitable for distributed hydrogen production systems for fuel cell applications. The governing equations for steam/methane mixture gas flowing through the microchannel reformer were derived considering the species conservation with reforming reactions and energy conservation with external convective heat supply. The reaction rates for the developed model were simply determined through the catalyst effectiveness factor correlations instead of performing complicated calculations for the steam/methane reforming process occurring inside the washcoat catalyst layers. The accuracy of the developed was verified by comparing the results obtained herein with those obtained by the detailed computational fluid dynamics calculation for the same microchannel reformer.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.31 no.3
• /
• pp.39-49
• /
• 2018

Objectives : This study is designed to clarify whitening, anti-inflammatory effect of fractions extracted from the mixture of Phaseolus radiatus L. and ethanol. Methods : In this experiment, we were intended to reveal whitening, anti-inflammatory effect of fractions extracted from the mixture of Phaseolus radiatus L. and ethanol. The whitening activity was confirmed by UV blocking activity, tyrosinase inhibiting activity, and melanin formation inhibiting activity. Anti-inflammatory activity is confirmed by measurement of cytotoxicity level by MTT assay and measurement of Cytokine expression, which is the main mediator of inflammation reaction. Results : As a results, overall activity was high in the ethyl acetate fraction. Tyrosinase inhibitory activity was less than 20% at all concentrations, but the activity to inhibit melanin self-production was higher than that of ethyl acetate fraction at $32.19{\pm}2.79%$ at $100{\mu}g/m{\ell}$. And ethyl acetate fraction had a relatively high UV blocking activity. In the anti-inflammatory test, the concentration-dependent activity was shown, and the chloroform and ethyl acetate fractions showed significant NO production inhibitory activity. Cytokine expression was superior to that of the final stage of B cell differentiation, and cell viability was over 80% except for the chloroform fraction at the concentration of $200{\mu}g/m{\ell}$. Conclusions : The results of this experiment confirmed the whitening effect and anti-inflammatory effect of Phaseolus radiatus L.'s extracts and fractions and report the possibility of application as external medicine.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.1
• /
• pp.23-36
• /
• 2011

The purpose of this study is to make theoretical examinations into the makeup trend shown in digital communication environment and thereby determine potential associations of makeup trend with digital communication environment and characterize said trend, so that it can provide reference materials required for follow-up studies. This study comes to the following findings: First, it is found that there are sociocultural characteristics of digital communication environment, such as interactivity, technology-orientedness, sentiment-orientedness and mixture of time and space. Secondly, it is found that trends developed in makeup fall categorically into interactivity, virtuality, amusement and mobility. Thirdly, it is found that each type of digital communication adopts a mixture and juxtaposition of contemporary styles or categories with traditional ones through eclectic combination based on open-minded and horizontal ideas. Fourthly, it is found that a trend from digital communication environment doesn't coincide perfectly with any makeup trend, but the former trend works interactively and organically with the latter trend on the basis of homogeneity and similarity within a general framework that represents external esthetics of human being. With the creation of digital communication environment, our contemporary society forms as the complex phenomena of digital society in a combination and destruction of different categories beyond any certain international boundary, so that a hybrid tendency appears in contemporary makeup trend as well. Based on these findings, this study has its implications in the sense that it gives a new viewpoint based on design, formative characteristics and expression styles of makeup, and also provides useful reference materials for related industrial sectors.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.110-116
• /
• 2013

A concrete structure has become bigger and higher because of development of construction technology and a change in construction environment. Also it tends to focus on repairing, reinforcement and exterior in harmony with environment for structure maintenance and performance improvement. The research is about eco friendly durable painting applicable to concrete structure using civil and architecture. it purpose to improve external beauties and durable problems due to flexibility by variation of temperature, adhesion of exterior wall, crack and delamination in existing organic and mineral painting. For those problems, we made a eco friendly pre-paint that is made with preliminary treatment mixture as a highly enriched waterproof agent and adhesive increasing agent in preprocessing mixture. Then we performed an experiment on durability of prevention neutralization of concrete, durability abrasion, hiding power, adhesion, temperature resistance and resistance to chemical attack. The result of an experiment shows that hiding power is over 0.96 in standard test, durability abrasion test got higher value 1mg than water paint 75mg and tensile strength is 6 times higher than standard waterproof specification.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.62-69
• /
• 2023

Re-damage is frequently occurring for various reasons, including material factors, external factors, and factors caused by poor construction in concrete cross-section restoration work, so it is necessary to identify the cause and improve it. Cement-based materials are the most commonly used maintenance materials for concrete structures, and in particular, additional cross-sectional restoration work may be carried out due to re-damage such as cracks and excitement due to dry contraction of the repair material. In this study, a basic study was conducted to identify the characteristics of concrete while diversifying the maximum dimensions and assembly rate of thick aggregates to examine the effects of using thick aggregates in repair materials. As a result, the slump of concrete increased as the maximum size of thick aggregates increased, and the amount of air content was measured 1.88 to 2.35 times higher in the mixing using aggregates with a maximum aggregate size of 5 mm or more compared to the mixing group with a maximum aggregate size of 10 mm or more. It was found that compressive strength was greatly affected by the performance rate of thick aggregates. The compressive strength was measured the highest in the mixture using thick aggregates with the highest performance rate of 20 mm, and the compressive strength of the mixture with the lowest performance rate was more than 45%. As a result of the dry shrinkage measurement, the dry shrinkage was the lowest as the performance rate of the thick aggregate increased according to the change in the maximum dimensions and assembly rate of the thick aggregate, and the lowest performance rate was the largest in the mix. Through this study, it was confirmed that adjusting the particle size by diversifying the maximum dimensions and assembly rate of thick aggregates used in concrete structure repair materials can improve strength and workability and reduce dry shrinkage.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.11-15
• /
• 2016

The organic light emitting diodes (OLEDs) have been studied as large flexible displays, light source and hard wares of internet of things. However, OLEDs show some drawbacks in terms of external environments due to the low work function of the metals and the reactive organic materials. In particular, the operation functions of the OLEDs tend to deteriorate rapidly by exposing the oxygen and moisture. So as to prevent it, domestic and overseas studies underway in various method such as ALD, PVD, CVD. But it has complex process and high cost. Therefore In order to protect devices from the external environments, it is important to develop the passivation thin films of low-cost and simple process which can prevent the devices from the penetration of the oxygen and moistures. In this study, to improve the reliability, passivation thin films were coated onto the green OLEDs by spin coating method and investigated the changes of the optical properties of the prepared devices at various doping concentrations of sodium alginate (SA). The passivation solutions were synthesized by using polyvinyl alcohol (PVA) host material with a dopant of SA which were added with the amounts of 10, 20 and 40 wt% into the PVA. As a result, the best barrier properties of the OLEDs were obtained for the samples with 40 wt% SA. Finally, the passivation films can be optimized by using the mixture solution of PVA and SA materials.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.2
• /
• pp.41-50
• /
• 2010

The concrete lining of a tunnel constructed by NATM used to be regarded as facing material which does not support any load from the surrounding ground. But the recent appraisal of the decrepit tunnels revealed that rockbolts and shotcrete deteriorate with time resulting in loss of supporting capability. Consequently, concrete lining has to support part of the load which used to be supported by rockbolts and shotcrete, and thus should be regarded as the final supporting structure in a tunnel. One of the common, and perhaps the most serious problem in concrete lining is the longitudinal cracks taking place at the tunnel crown. The longitudinal cracks, mostly related to the construction procedures, can be developed by many reasons such as the lack of thickness, wrong materials, bad curing environment, and excessive external forces. Many efforts has been made to control and suppress these cracks but efficient and economic way is yet to be found. For efficient crack control in concrete lining, reinforcement by composite fibers, which is the mixture of steel fiber and nylon fiber, is suggested in this study.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.5
• /
• pp.1285-1290
• /
• 2004

From a view point of Hyungsang medicine a study is made on depressive syndromes through 'Donguibogam(東醫寶鑑)' ,'Clinical lectures by Mr. Jeesan(芝山先生 臨床學特講)' and other literature. Depressed energy(?) originally meant the disorder of vital energy in the circulation of nature with the lapse of time. In later, it has been changed to mean the disease of man, especially related to the mind. Depressive syndromes come from the stagnation of the Ki or the abnormal circulation(rising, falling, coming and going), which happens when man cannot adjust oneself to the circumstances due to the disharmony between internal and external conditions. Depressive syndrome easily attacks the following types of persons; Dam type person with excessive Ki and deficient Hyung(形), manly woman, womanly man, Bird type person who shows a great variety of emotion, Turtle type person declined to melancholy, Ki type person apt to be depressive, and Shin type person with upward gush of the fire. It also attacks the persons who have smudgy face with the scar between eyebrows, those whose pulses are mixture of two different kinds and those whose pulses extend on two ranges in Jeesan's diagram. Depressive syndromes recorded in 'Donguibogam' are globus hystericus, chest congestion, gastric discomfort, cough and asthma caused by depressed Ki, abdominal mass, edema, and tympanites. The most effective prescriptions for depressive syndromes are Eajintang(二陳湯), Guibitang(歸脾湯), Hyangsosan(香蘇散), and Gamisachiltang(加味四七湯).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1742-1747
• /
• 2004

Effects of raw material composition, feed moisture and process temperature on chemical, physical and sensory properties of extrudates produced by a single-screw extruder from the mixtures of rice flour, isolated soy protein and file fish were evaluated through response surface methodology (RSM). Nitrogen solubility index (NSI), integrity index (II), rehydration ratio (RR), density, and the external appearance were measured as indices of physicochemical and sensory properties of extrudates. RR was negatively correlated with density (R=-0.742, p<0.0l). Increased amounts of rice flour in feed mixtures resulted in increased RR. The extrudate prepared from the mixtures of ISP, rice flour and file fish showed the highest sensory score at which extrusion temperature was 13$0^{\circ}C$ or above.