• Steel and Composite Structures
• /
• 제28권2호
• /
• pp.167-177
• /
• 2018

In order to investigate mechanical properties in the core area of Square Hollow Section(SHS) column connection with external stiffening ring, four specimens were tested under the static tension load. The failure modes, load-displacement curves and strain distribution were analyzed to study the mechanical properties and the load transfer mechanism of the core area of connections. The connections behave good ductility and load-bearing capacity under the static tension load. Parametric analysis was also conducted, in which the thickness of steel tube, extended width and thickness of the stiffening ring were considered as the parameters to investigate the effects on mechanical properties of the connections. Based on the experimental results, an analytical method for the bearing capacity of connection with external stiffening ring under the static tension load was proposed. The theoretical results and the experimental results are in good agreement, which indicates that the theoretical calculation method of the bearing capacity is advisable.

• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.80-85
• /
• 2021

본 연구에서는 항공기용 외부연료탱크의 정하중시험을 수행하기 위해서 외부연료탱크에 작용하는 비행하중을 시험하중으로 변환하고 변환된 시험하중들의 적합성을 검증하였다. 비행하중으로부터 시험하중을 계산하기 위해서 외부연료탱크를 몇 개의 구간으로 나누고, 각 구간별로 단위하중과 단위모멘트에 의해 발생하는 전단하중과 모멘트를 계산하였다. 그리고, 산출된 전단하중과 모멘트 그리고 비행하중 조건과의 연산을 통해 각 구간별 시험하중을 계산하였다. 실제 구조시험에서는 물리적 제약 등으로 시험하중을 계산 지점과 동일한 위치에 부과할 수 없는 경우가 많기 때문에 실제 시험에서 하중을 부과할 수 있는 위치들을 결정한 후, 각 구간에서 계산된 시험하중을 선정된 위치로 재분포시켰다. 그리고, 시험수행의 효율성을 높이면서 작동기 운용이 용이하도록 휘플트리를 적용하여 최종 시험하중 계획을 수립하였고, 비행하중 조건과의 비교를 통해 수립된 시험하중 계획의 신뢰성을 확인하였다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.16-22
• /
• 2016

This paper addresses the load usage scheduling in the HEMS for residential power consumers. The HEMS would lead the residential users to change their power usage, so as to minimize the cost in response to external information such as a time-varying electricity price, the outside temperature. However, there may be a consumer's inconvenience in the change of the power usage. In order to improve this, it is required to understand the pattern of load usage according to the external information. Therefore, this paper suggests a methodology to model the load usage pattern, which classifies home appliances according to external information affecting the load usage and models the usage pattern for each appliance based on a copula function representing the correlation between variables. The modeled pattern would be reflected as a constraint condition for an optimal load usage scheduling problem in HEMS. To explain an application of the methodology, a case study is performed on an electrical water heater (EWH) and an optimal load usage scheduling for EHW is performed based on the branch-and-bound method. From the case study, it is shown that the load usage pattern can contribute to an efficient power consumption.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.393-397
• /
• 2007

이 연구의 목적은 추력, 항력, 중량 등의 외력들에 기인하여 가늘고 긴 동체의 소형로켓의 비행궤도에 영향을 줄 수 있는 임계하중을 조사하는데 있다. 임계하중은 먼저 Euler 기둥식을 이용하여 구하였고, 검증을 위해 유한 요소법의 수치해석 결과와 비교하였다.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.97-104
• /
• 2017

Reinforcement of insulation in apartment buildings reduces the heating and cooling energy consumption by lowering the heat transfer in the building envelope. There are differences between internal and external insulation methods in heat transmission properties. However, some building load calculation programs cannot analysis the differences between the two. This is because these programs do no account for the timelag or thermal storage effect of the wall according to the location of insulation. In this study, the heat transmission characteristics of internal and external insulation were analyzed by EnergyPlus, and heating and cooling energy demand was compared. The results showed that external insulation system had lower heating and cooling loads than internal insulation system. Also the heat transfer rate of external insulation is steadier than internal insulation. About 13.6% of heating and cooling energy demand decreased when the outdoor wall was finished with external insulation compared to the demand with internal insulation.

• 항공우주시스템공학회지
• /
• 제18권1호
• /
• pp.64-71
• /
• 2024

항공기 외부연료탱크는 항공기의 항속거리를 증가시키는 주요 구성품으로써, 비상시 파일런에서 안정적으로 분리될 수 있어야 된다. 이 때, 외부연료탱크의 핀(fin)과 피벗(pivot)에는 분리하중이 작용하게 되는데, 외부연료탱크의 안정적인 분리를 위해서는 핀과 피벗의 구조 건전성이 입증되어야 한다. 본 연구에서는 항공기로부터 외부연료탱크가 분리 될 때 외부연료탱크의 핀과 피벗의 구조건전성 검증을 위해 수행된 구조시험 결과를 제시하였다. 본문에서는 구조시험에 사용되는 유압 및 하중제어장비, 데이터 획득장치 그리고 공압공급장치로 구성되는 시험구성도를 설명하였고, 각 시험조건에 대한 시험설치와 시험하중 인가계획을 제시하였다. 구조시험 결과, 각 시험조건에서 시험하중과 시험체의 내부압력이 허용 범위 내에서 적절히 제어되는 것으로 파악되었고, 시험체에서도 심각한 구조적 결함이 발생하지 않았음이 확인되었다. 최종적으로, 설계 제한하중과 설계 극한하중에 대한 구조시험을 통해서 본 연구의 항공기용 외부연료탱크 핀과 피벗은 충분한 구조 강도를 보유하고 있음을 확인하였다.

• KIEAE Journal
• /
• 제2권4호
• /
• pp.21-26
• /
• 2002

Modem architecture represent a great capitalistic, polishing, high-technology image to the public by design. As a result, glass architecture which show 'transmittance' in desinging play a leading part, consequently a role of machine is increasing in controlling an internal environment of building. These movement look like assisting an universal standard building disregarding a each nation's climate peculiarity, if glass building is applied by a proper external shading device. the shading device has a great effect on the reduction of cooling load energy, this research to propose the proper designing scheme of the fixed external shading device. The effect of proper external shading device on the cooling load is evaluated by the numeric simulation.

• 항공우주시스템공학회지
• /
• 제9권1호
• /
• pp.28-34
• /
• 2015

Armed aircraft of a basic trainer class installs external stores under wing box by using pylon and performs an operation such as weapon delivery and jettison, and should be designed to withstand all kinds of loads applied to external stores. The static strength test of pylons and wing box was performed to assess the static strength of pylon and their support structures for substantiation. Based on the test, the structures were verified to fully satisfy a given design requirement. In this paper, methods of test load generation of wing box and pylon, evaluation of test result data and design result of test set-up were presented. Comparing the FEM analysis with the same test data can lead to good match and reasonable deviation between both. Finally, based on the test and the analysis, the static strength of test article was substantiated and the reliability and effectiveness of analysis math model were obtained.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.141-147
• /
• 2012

Recently, the external prestressed concrete structures are increasingly being built. The mechanical behavior of prestressed concrete beams with external tendon is different from that of normal bonded PSC beams in that the increment of tendon stress was derived by whole member behavior. By this reason, the ultimate stress of external tendon is smaller than that of bonded tendon or internal unbonded tendon. The purposes of the present paper are therefore to improve the mechanical behavior of external unbonded tendon by using partially bonded external tendon and to evaluate the flexural behavior of partially bonded external tendon by the flexural member experiment. From the experimental results, before flexural cracking, there was no difference between external unbonded, partially bonded and bonded tendons. However, after cracking, yielding load of reinforcement, ultimate load, and tendon stress were increased in the sequence of external unbonded, partially bonded and bonded tendon members. The equation of ACI-318 and AASHTO 1994 were not matched with test results and had no correlations. So the newly proposed equation will be needed including the consideration of tendon profile, tendon bonded type, and so on. The proposed partially bonded external tendon in this paper will be a effective basis for the evaluation of external tendons in construction and design.

• 대한조선학회지
• /
• 제20권4호
• /
• pp.1-8
• /
• 1983

This paper describes the application of the finite element method to the large deflection elastic plastic analysis and ultimate load calculation of axisymmetric shell of revolution with initial imperfection subjected to external pressure. The nonlinear equilibrium equations are linearized by the successive incremental method and are solved by the combination of load increment and iteration scheme with considering plastic deformation theory. To get the more realistic effect of large deflection, corrected coordinats and directions of applied load ar every load increment steps are used. The effects of the plasticity, initial imperfection and the shape of shells on the ultimate load of clamped circular cap under external pressure are investigated. Consequently, the following conclusions are obtained; (1) At same geometric parameter $\lambda$, each shape of clamped circular caps yield same elastic ultimate loads in both cases, i.e. with and without initial imperfections, whereas, in the case of elastic-plastic state the shell becomes thicker, the ultimate loads are getting smaller. (2) The effects of initial imperfection to ultimate load are most significant in the elastic case and are more senstive in the elastic-plastic state with the thinner shells.