• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.133-134
• /
• 2022

This study proposed vision artificial intelligence-based automated supervision technology for external insulation and finishing system, and basic research was conducted for it. The automated supervision technology proposed in this study consists of the object detection model (YOLOv5) and the part that derives necessary information based on the object detection result and then determines whether the external insulation-related adhesion regulations are complied with. As a result of a test, the judgement accuracy of the proposed model showed about 70%. The results of this study are expected to contribute to securing the external insulation quality and further contributing to the realization of energy-saving eco-friendly buildings. As further research, it is necessary to develop a technology that can improve the accuracy of the object detection model by supplementing the number of data for model training and determine additional related regulations such as the adhesive area ratio.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.15-18
• /
• 2008

A Spatial structure, having a curvature with a curved surface, is an extremely efficient mechanical creation considering the external load. It is resisted the out-of-plane direction load by in-plane forces using the structure's curvature. Spatial Structures include many types of structures, such as: space frames or grids; cable-and-strut and tensegrity; air-supported or air-inflated; self-erecting and deployable; cable net; tension membrane; lightweight geodesic domes; folded plates; and thin shells. Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. It is very important that effects by wind load than seismic and dead load. And, wind load is different by surrounding and shape of building In this study, we analyze the results of design wind load and wind tunnel tests about the 2 stadiums which are constructed on sensitive sites by effect of wind loads.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.22-28
• /
• 2010

Approximate analysis for a building installed with a friction damper is performed to get insight of its dynamic behavior. Energy balance equation is used to have a closed analytical form solution of dynamic magnification factor(DMF). It is found out that DMF is dependent on friction force ratio and resonance frequency. Approximation of DMF and equivalent damping ratio of a friction damper is proposed with such assumption that the building with a friction damper shows harmonic steady-state response and narrow banded response behavior near resonance frequency. Linear transfer function from input external force to output building displacement is suggested from the simplified DMF equation. Root mean square of a building displacement is derived under earthquake-like random excitation. Finally, design procedure of a friction damper is proposed by finding friction force corresponding to target control ratio. Numerical analysis is carried out to verify the proposed design procedure.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.795-814
• /
• 2021

With the development of science and technology in recent years, various types of unstructured buildings have begun to be implemented by combining traditional architectural styles with digital tools, which are significantly different from conventional formal buildings. Designers will use various methods or digital tools to complete the unstructured and freer architectural forms when building an unstructured building. Based on this background, the need for research on the criteria for evaluating the characteristics of unstructured architectural forms is raised. First, the text was reconstructed by considering and integrating the elements of the unstructured exterior form based on prior research, with the external form of the unstructured building as the main research object. Second, the purpose of this study was to classify various types of unstructured forms and to provide important basic data for designing digital processes of unstructured architectural forms.Third, from 2000 to 2020, the text focused on the study of unstructured buildings and conducted in-depth analysis of the characteristics of their form expressions. While providing a case basis for the study of related fields, distribution laws and presence values related to the characteristics of unstructured buildings were sought. In addition, the analysis was conducted in combination with the distribution of functional use of buildings, and this study is differentiated from the existing research in that the atypical form is applied to the buildings by use, and the application trend of this type is understood to enhance understanding of the atypical form of buildings.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.91-92
• /
• 2006

The fine-tuned dendrons provide unique supramolecular self-assemblies in various environments such as in water, organic media, and solid-liquid interfaces. They form nanotubes, vesicles, thin films, columns, lamellar nanoribbons depending on the condition of self-assembly process. Unique characteristics of self-assembly of the amide dendrons are described. In addition, elucidation of the structural correlation between the building blocks and the assemblies, stabilization of assembled structure, and transformation of supramolecular assemblies by using external stimuli. Particular emphasis is placed on the formation of cyclodextrin-covered organic nanotubes derived from self-assembly of amide dendrons and their supramolecular transformation. Finally, unique biosensory characteristics of the self-assembled nanotubes will be discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.117-118
• /
• 2014

The unfloored space and floor is one of characteristic of traditional house in Korea. This space is used to connecting passage between room or entrance of house. Currently, according to decline of heat insulation property thereby becoming decrepit house, native is repairing it for block external environment such as rain, wind and so on. But, variety problem is happening from wrong repair. This object of this study is current status and analysis on problem of unfloored space and floor repair. As a result, current status of repair is classified repair type, installation position and using form. And position of problem is confirmed connection between original house and extend space.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.179-180
• /
• 2018

Color concrete is produced by adding white portland cement and coloring agent. In Korea, colorant added to color concrete is expensive, durability evaluation in external environment is not verified and there is a tendency to avoid color concrete pouring. Red mud with a water content of 50% was prepared in liquid form using appropriate mixing water and additives for recycling as a coloring agent, the liquefied red mud manufactured was intended to show the possibility of using color concrete. In this paper, the application of red mud as an industrial by - product as a coloring agent for color concrete was investigated for the practical use of liquefied red mud by liquefying red mud and producing retaining wall block. As a result, it was found that all of the specifications stipulated in SPS-KCIC0001-0703 are satisfied.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.19-24
• /
• 2018

Recently, people can create small content by themselves and it improved into a form that can be promoted. Also, as active small business owners increase, they produce the content for promotion by themselves without external professional help and they utilize it. This paper studies the method to make Mobile Apps, Mobile Web and homepage services available by automatically generating the mobile based mini content. The automated content creation system suggests the method that small business owners and groups can easily communicate with new people by bringing Single Page Application, hybrid mobile web app, N-Screen based content building, private cloud-based PaaS building technology, P2P network based file sharing and multimedia thread technologies together and creating the content.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.193-205
• /
• 2019

Looking at recent safety accidents in buildings, most of them due to lack of FM expertise, and this is due to human resources. In each all industry areas, some companies are competitive, representational, and leading in the market through long-term expertise and research in their respective fields. In the field of FM industry, some companies offer core-competencies in internal and external innovative building management through competition with others. However, old custom and old management form still exist in the FM field. However, an old custom and old management system still exist in the FM field; it forces cost-cutting and caused by carelessness in technical development competitiveness and safety measures. The government control by safety inspection and facility inspection through legislation of building management, but the management is still weak as a side of in the facility management section due to inspect sth as a mere formality and submit a paper report. These facts exist different kind of usage of the building have a three-party encounter between a building owner, user, and FM enterprises. In this research identify survey, especially building owner (manager)'s choice perception priority for optional factors to choose FM enterprises. Based on this, FM enterprises will be forced to seek a new dimension for better building management. In this light, the purpose of the research is to shape changes in the FM market culture safely and providing better service in building management and understanding building owner's insight through this research's information.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.10-20
• /
• 2018

Buildings are responsible of major energy consumption globally. In addition, they are linked to thermal comfort. The need to provide comfort becomes more crucial in schools as they are the place where students learn, and develop their skills. This research aims to investigate the energy responsiveness of new and traditional school building design, where major variation in form, amount of external walls and glazing are different. The research focused on indoor microclimate condition of selected schools in the city of Jeddah where the climate is hot and humid using advanced tools for monitoring. The research uses advanced energy equipment to measure several aspects such as floor temperature, roof temperature, globe temperature and other factors which can lead to predictable thermal comfort of users. The findings suggest that a larger area of glazing shielded from sunlight has a greater influence on both indoor condition and general thermal sensation. The finding also suggests that the glazing ratio is a major contributor on indoor thermal pattern which can result in an increase in temperature profile between from $7-10^{\circ}C$. The findings of this research can assist in the improvement in the design of the prototype school building in hot and humid climate.