• 한국가구학회지
• /
• 제24권1호
• /
• pp.60-69
• /
• 2013

Timber is an eco-friendly material that is suitable for low carbon and green growth, and recently, studies on utilization and manufacture of timber are increasing. Thus, we need a stable supply of wood working materials for the formative element and widespread function of timber. It is necessary to develop the use of timber because it enhances the added value of this material by making the most of it. In this way, skin-timber is an appropriate material for life articles because skin-timber has a variety of functions including the ability for storage use, the beauty of structure, the ability to maintain heat and insulation, and the capability to control humidity. In this study, I developed household items using skin-timbers that are made up of circular columns and square columns of pine, larch, and yellow popular. The circular and square columns have an inner hole that is approximately 90% of the external structure's width. I intended for the concept of these designs to display creativity considering functionality and productivity. These items are life articles and furniture for modern people. They are eco-friendly products that are varnished with traditional lacquer and natural oil. According to the result of this study, skin-timbers are made of domestic pine, larch, and yellow popular and are resource of furniture, household items, and woodcraft. I believe skin-timber is not only a useful material for processability and design applicability, but it also has the capability to be a multifunctional and high value-added material. Also, if the standards, such as cortex thickness, outside diameter, and length, of skin-timber are producted diversely, I believe skin-timber can be have more the possibility of industrial products' development.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.1-10
• /
• 2016

This paper reports the trends of researches and technologies of electronic packaging using graphene. Electronic packaging is to provide the signal and electrical current among electronic components, to remove the heat in electronic systems or components, to protect and support the electronic components from external environment. As the required functions and performances of electronic systems or components increase, the electronic packaging has been intensively attracted attention. Therefore, technologies such as miniaturization, high density, Pb-free material, high reliability, heat dissipation and so on, are required in electronic packaging. Recently, graphene, which is a single two-dimensional layer of carbon atoms, has been extensively investigated because of its superior mechanical, electrical and thermal properties. Until now, many studies have been reported the applications using graphene such as flexible display, electrode, super capacitor, composite materials and so on. In this paper, we will introduce and discuss various studies on recent technologies of electronic packaging using graphene for solving the required issues.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.391-398
• /
• 2016

음향방출기법은 구조물에 존재하는 손상 및 손상 메커니즘을 규명하는 가장 유효한 비파괴검사 수단으로 널리 이용되고 있다. 그러나 기존의 손상위치표정 기법은 탄성파 전파 속도에 크게 의존하는 기법의 한계에 의하여 복합재료 또는 이종의 재료로 구성된 구조물에서의 손상을 탐지하기 어려운 한계점을 가지고 있다. 최근 다양한 분야에서 사용되고 있는 압축천연가스(CNG) 저장용기는 무게와 강성의 효율을 위하여 복합재료를 사용하여 외부를 보강하는 새로운 형태의 구조를 사용하고 있다. 이러한 다층 복합소재의 사용으로 기존의 손상탐지기법으로는 저장용기의 외부에서 가해지는 충격 혹은 결함에 의한 저장탱크에 발생한 손상의 측정이 매우 어렵게 되었다. 이러한 한계를 극복하기 위하여 본 연구에서는 선행연구를 통하여 개발된 에너지 기반 contour D/B map 기법을 이용하여 4 가지 형식의 CNG 저장탱크에 발생한 외부 충격 신호의 손상 위치를 측정하였다. 각각의 형식의 저장탱크에서 측정된 손상 위치 결과를 비교 분석하여 새로운 기법의 측정 성능을 알아보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.33-36
• /
• 2008

The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

• 한국농공학회논문집
• /
• 제49권2호
• /
• pp.75-86
• /
• 2007

This process which has a connection of biofilter and sulfur-limestone has been developed to treat organic substances including BOD, COD and SS etc. and to treat sulfur-limestone is for denitrification.. The whole process consists of chemical reaction tank, sedimentation tank, trickling filter, denitrification tank The trickling filter is equipped with a reactor filled with absorptive filter, and the sulfur denitrification tank is filled with sulfur-limestone mixed media. After setting up practical facilities whose capacity is 60 tons a day, we have observed the removal efficiencies of pollutants through 60 experiments during Summer and Winter seasons. The average concentration of polluted water was BOD for 3.6 mg/L, $COD_{Mn}$ for 11.3 mg/L, SS for 2.8 mg/L, T-N for 8.6 mg/L, and T-P for 0.8 mg/L, and the rate of treatment efficiencies 96.5%, 84.7%, 96.5%, 79.2%, and 80.8%, respectively was found through the experiments. The average treatment efficiency for BOD and $COD_{Mn}$ was 85.0% and 55.7%, respectively and the average removal efficiency for NH4+-N was 84.9% in the trickling filter. The removal efficiency in the denitrification tank is as follows; The removal rate of $NO_3^--N$ was as high as 93.2% within the compass of pH 6.3 to 7.3 through $16.8{\sim}37.0mg/L$ flown into $NO_3^--N$ and $0.1{\sim}8.3mg/L$ outflown. It had observed that this process has implemented highly efficient and advanced treatment without external carbon sources and internal recycle during its process. In conclusion, this process is suitable for a sewerage in a small village due to the merits of low power consumption and easy maintenance.

• 대한환경공학회지
• /
• 제29권2호
• /
• pp.220-228
• /
• 2007

본 연구에서는 완전혼합 방식의 단일 반응기에서 동시 질산 탈질반응을 구현하여 유입수 내 질소를 효과적으로 제거하고자 하였다. 동시 질산 탈질반응 적용 시 반응조 내의 용존산소 농도와 유입수의 C/N비가 중요한 인자라는 점에 착안하여 적정 용존산소 농도와 C/N비를 규명하고자 하였다. 합성 폐수 실험 결과 0.5 mg/L의 용존산소 농도 및 7 이상의 C/N비에서 안정적인 질소 제거가 이루어짐을 알 수 있었다. 인근 하수처리장 실제 유입수를 이용한 실험결과 0.5 mg/L의 용존산소 농도의 유지만으로는 원래 가지고 있던 낮은 C/N비로 인해 안정적인 질소 제거가 어려웠으나 외부 탄소원(glucose)의 주입을 통해 C/N비를 7 이상으로(최대 14까지) 높여주었을 경우 70% 이상의 안정적인 질소 제거가 단일 반응조에서 가능하였다.

• 한국방재학회 논문집
• /
• 제4권2호
• /
• pp.29-34
• /
• 2004

철도차량의 내장재료로 사용되는 페놀수지의 laminate Panel과 sandwich panel의 화재특성을 콘칼로리미터를 이용하여 착화시간, 열방출율과 일산화탄소방출량을 비교, 조사하였다. 또한 기존 철도차량용 내장재료로 사용된 불포화 폴리에스터와 페놀수지와의 화재특성을 비교하였다. 페놀수지의 중량감소 및 열분해능을 DSC & TGA를 이용하여 측정하였다. 콘칼로미터 실험결과 착화시간, 열방출율 및 일산화탄소 생성량은 50kW 복사조건에서 더 높게 나타남을 알 수 있었으며, 동일한 복사열소건 하에서는 sandwich-페놀수지가 laminate-페놀수지보다 더 빨리 착화되었다. 기존 철도차량에 적용되었던 불포화 폴리에스터와 페놀수지와의 비교시험 결과 페놀수치의 화재성능이 발열량 및 일산화탄소 방출 모두에서 우수한 것으로 조사되었다.

• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.75-81
• /
• 2014

Methanotrophic denitrification under a non-aerated condition (without external supply of oxygen or air) was investigated in a bioreactor coupled with a membrane diffuser. Batch experiment demonstrated that both methane consumption and nitrogen production rates were not high in the absence of oxygen, but most of the nitrate was reduced into $N_2$ with 88% recovery efficiency. The methane utilized for nitrate reduction was determined at 1.63 mmol $CH_4$/mmol $NO_3{^-}$-N, which was 2.6 times higher than the theoretical value. In spite of no oxygen supply, methanotrophic denitrification was well performed in the bioreactor, due to enhanced mass transfer of the methane by the membrane diffuser and utilization of oxygen remaining in the influent. The denitrification efficiency and specific denitrification rate were 47% and 1.69 mg $NO_3{^-}-N/g\;VSS{\cdot}hr$, respectively, which were slightly lower than for methanotrophic denitrification under an aerobic condition. The average concentration of total organic carbon in the effluent was as low as 2.45 mg/L, which indicates that it can be applicable as a post-denitrification method for the reclamation of secondary wastewater effluent. The dominant fatty acid methyl ester of mixed culture in the bioreactor was $C_{16:1{\omega}7c}$ and $C_{18:1{\omega}7c}$, which was predominantly found in type I and II methanotrophs, respectively. This study presents the potential of methanotrophic denitrification without externally excess oxygen supply as a post-denitrification option for various water treatment or reclamation.

• 한국환경과학회지
• /
• 제25권11호
• /
• pp.1493-1498
• /
• 2016

The efficiencies of Gang-Byeon sewage treatment facilities, which are based on GPS-X modelling, were analysed and used to design recycle water treatment processes. The effluent of an aeration tank contained total kjeldahl nitrogen (TKN) of 1.8 mg/L with both C-1 and C-2 conditions, confirming that most ammonia nitrogen ($NH_3{^+}-N$) was converted to nitrate nitrogen ($NO_3{^-}-N$). The concentrations of $NH_3{^+}-N$ and $NO_3{^-}-N$ were found to be 222.5 and 227.2 mg/L, respectively, with C-1 conditions and 212.2 and 80.4 mg/L with C-2 conditions. Although C-2 conditions with higher organic matter yielded a slightly higher nitrogen removal efficiency, sufficient denitrification was not observed to meet the discharge standards. For the total nitrogen (T-N) removal efficiency, the final effluent concentrations of T-N were 293.8 mg/L with biochemical oxygen demand (BOD) of 2,500 mg/L, being about 1.5 times lower than that (445.3 mg/L) with BOD of 2,000 mg/L. Therefore, an external carbon source to increase the C/N ratio was required to get sufficient denitrification. During the winter period with temperature less than $10^{\circ}C$, the denitrification efficiency was dropped rapidly even with a high TKN concentration (1,500 mg/L). This indicates that unit reactors (anoxic/aerobic tanks) for winter need to be installed to increase the hydraulic retention time. Thus, to enhance nitrification and denitrification efficiencies, flexible operations with seasons are recommended for nitrification/anoxic/denitrification tanks.

• ALGAE
• /
• 제31권3호
• /
• pp.243-256
• /
• 2016

Concerns about how ocean acidification will impact marine organisms have steadily increased in recent years, but there is a lack of knowledge on the responses of macroalgae. Here, we adopt an outdoor continuous-flowing mesocosm system designed for ocean acidification experiment that allows high CO₂ conditions to vary with natural fluctuations in the environment. Following the establishment of the mesocosm, five species of macroalgae that are common along the coast of Korea (namely Ulva pertusa, Codium fragile, Sargassum thunbergii, S. horneri, and Prionitis cornea) were exposed to three different CO₂ concentrations: ambient (×1) and elevated CO₂ (2× and 4× ambient), over two-week period, and their ecophysiological traits were measured. Results indicated that both photosynthesis and growth exhibited species-specific responses to the different CO₂ concentrations. Most notably, photosynthesis and growth increased in S. thunbergii when exposed to elevated CO₂ conditions but decreased in P. cornea. The preference for different inorganic carbon species (CO₂ and HCO₃⁻), which were estimated by gross photosynthesis in the presence and absence of the external carbonic anhydrase (eCA) inhibitor acetazolamide, were also found to vary among species and CO₂ treatments. Specifically, the two Sargassum species exhibited decreased eCA inhibition of photosynthesis with increased growth when exposed to high CO₂ conditions. In contrast, growth of U. pertusa and C. fragile were not notably affected by increased CO₂. Together, these results suggest that the five species of macroalgae may respond differently to changes in ocean acidity, with species-specific responses based on their differentiated photosynthetic acclimation. Understanding these physiological changes might allow us to better predict future changes in macroalgal communities in a more acidic ocean.