• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2017

Purpose : The purpose of this study was to find out the difference motion of hip, knee and ankle joint during walking according to using walker on older people. Method : Korean older people of 34 subjects was participated in this study. Participants was measured joint motion on hip, knee and ankle joint during both conditions (walking with walker and without walker). The measured data were analyzed using independent t-test to investigate the difference of joint motion on the both condition. The statistical analyses were performed using Predictive Analytics Soft Ware (PASW) for windows(Ver. 19) and p-value less than .05 were considered significant for all cases. Result : The study showed that more joint motion on hip flexion and ankle pronation is increased by using walker. And hip extension, knee external rotation and ankle plantar flexion is decreased by using walker. Conclusion : This study suggest that using walker on older people was change the motion of the lower limb joint during walking. Therefore, It is necessary to develop a new walker that can reduce dependency and ensure stability on older people during walking.

• Journal of Pharmacopuncture
• /
• v.9 no.1
• /
• pp.139-154
• /
• 2006

Objective : This experiment was conducted to evaluate the effectiveness of Acupuncture, Bee Venom Acupuncture (BVA) and Bee Venom Herbal Acupuncture (BVHA) on post-stroke hemiplegic shoulder pain. Methods : 30 patients were randomly allocated into Acupuncture group, BVA group and BVHA group and was monitored weekly for 4 weeks; initial($T_0$), 1 week($T_1$), 2 weeks($T_2$), 3 weeks($T_3$) and 4 weeks($T_4$). Results : Visual analogue scale of shoulder pain showed significant decrease in BVA and BVHA groups compared to the Acupuncture group at T4 evaluation. Painless passive ROM of shoulder external rotation and Fugl-Meyer Motor Assessment of Upper Limb motor function showed significant increase in all groups. Modified Ashworth scale of the spasticity of upper limb showed no differences between the three groups. Conclusion : BVA & BVHA appears to be an effective in treating post-stroke hemiplegic shoulder pain. Further clinical studies must be done to obtain more concrete findings.

• Clinics in Shoulder and Elbow
• /
• v.20 no.4
• /
• pp.189-194
• /
• 2017

Background: Few studies have reported the results of arthroscopic coracoplasty concomitantly conducted with subscapularis tear. Therefore, this study was conducted to examine and compare the outcomes of arthroscopic subscapularis repair after arthroscopic coracoplasty using either the subacromial approach or rotator interval approach. Methods: We retrospectively reviewed 51 patients who underwent coracoplasty with subscapularis repair. The patients were grouped according to whether the subacromial approach group (24 patients) or rotator interval approach group (27 patients) was used during coracoplasty. Preoperative and postoperative visual analogue scale scores, American shoulder and elbow surgeons scores, Korean shoulder scores, and range of motion (ROM) were assessed. Assessment of repaired rotator cuff tendon integrity was performed at 1 year after surgery using either magnetic resonance imaging or ultrasonography. Results: At final follow-up, overall functional scores and ROM improved significantly in both groups when compared with preoperative values (p>0.05). The re-tear rates were not significantly different between groups; however, the rotator interval approach group showed a significant increase in ROM compared with that in the subacromial approach group (p<0.05). Conclusions: Arthroscopic coracoplasty conducted concomitantly with subscapularis repair can provide a satisfactory outcome. There were no significant differences between the two approach groups regarding final functional scores and re-tear rates. However, the rotator interval approach group showed a greater increase in ROM at final follow-up, especially in external rotation.

• The Journal of Korean Physical Therapy
• /
• v.27 no.6
• /
• pp.400-406
• /
• 2015

Purpose: The purpose of the present study was to examine joint position senses and muscle activity in subjects with and without chronic low back pain and to determine the effects of different types of bridge exercises on their trunk muscle activity. Methods: Thrity-eight subjects with chronic low back pain and thrity healthy controls participated in the experiment. Joint position senses and trunk muscle activity levels were measured during the different bridge exercise methods. Results: The joint position senses of the healthy group and chronic low back pain group showed significant differences during lumbar flexion, lumbar extension, lumbar lateral flexion, and lumbar rotation. The muscle activity levels of the transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) were highest in the prone bridge exercise (PBE) group, followed by the supine bridge swiss ball exercise (SBSE) group and supine bridge exercise (SBE) group in order of precedence. The muscle activity level of the erector spinae (ES) was highest in the SBSE group, followed by the SBE and PBE groups in order of precedence. Conclusion: Overall, the results suggest that chronic low back pain is associated with declines in joint position senses and that PBEs increase trunk muscle activity more than conventional bridge exercises.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2413-2419
• /
• 2015

Core spinal muscles are related to trunk stability and assume the main role of stabilizing the spine during daily activities; strengthening of core muscles around the spine can therefore reduce the chance of back pain. The objective of the study was to investigate the effect of core muscle strengthening in the spine during spine stabilization exercise using a whole body tilt device. To achieve this, a validated musculoskeletal (MS) model of the whole body was used to replicate the input motion from the whole body tilting exercise. An inverse dynamics analysis was executed to estimate spine loads and muscle forces depending on the tilting angles of the exercise device. The activation of long and superficial back muscles such as the erector spinae (iliocostalis and longissimus) were mainly affected by the forward direction (-40°) of the tilt, while the front muscles (psoas major, quadratus lumborum, and external and internal obliques) were mainly affected by the backward tilting direction (40°). Deep muscles such as the multifidi and short muscles were activated in most directions of the rotation and tilt. The backward directions of the tilt using this device could be carefully applied for the elderly and for rehabilitation patients who are expected to have less muscle strength. In this study, it was shown that the spine stabilization exercise device can provide considerable muscle exercise effect.

• The Journal of Korea Robotics Society
• /
• v.12 no.2
• /
• pp.107-115
• /
• 2017

In this paper, four-bar linkage mechanism for the knee joint is developed which is used in prosthetics. But unlike the prosthetics, the feature of this mechanism is that the instantaneous center of rotation of the four-bar linkages can be moved behind the ground reaction force vector so that it can be passively supported without any external power. In addition, this mechanism is developed similar to the structure of the human knee joint for eliminating the sense of heterogeneity of the wearer. In order to design the mechanism with these two objectives, optimization design process is done using the PIAnO tool and detailed design is carried out through optimized variable values. The developed mechanism is attached to the robot which can assist the hip and ankle joints. In order to verify the operation of the developed knee mechanism, an insole type sensor was attached to the shoes to compare data values before and after wearing the robot. Result data showed that wearer wearing the exoskeleton robot with the knee mechanism was the same value regardless of whether the heavy tool is loaded or not.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.2
• /
• pp.131-139
• /
• 2000

Gear train in the automobile to be used for controlling gas flow in automobiles consists of spur gears with involute tooth type in multiple stages. This spur gear is designed considering to the high power transfer efficiency, bending stress and contact stress in the static and dynamic analysis. The torque has been increased simultaneously the angular velocity has been decreased through the stages after being supplied by AC synchronous motor. This apparatus is controlled by electrical devices such as the PIC microprocessor, hall sensor and other electric components. By comparing the preset data of PIC microcomputer which is supplied by external DC electric power with the value set of hall sensor which detects the rotation angle position, PIC microcomputer thus controls AC motor and gear train according to the program algorithm which includes the on-off control and PWM motor driving method. As the result of the experiment such as performance, fatigue, torque test, we can conclude that this system is superior to the same and familiar foreign systems.

• Structural Engineering and Mechanics
• /
• v.56 no.1
• /
• pp.137-156
• /
• 2015

In this paper, an analytical solution of displacement, strain and stress field for rotating thick-walled cylinder made of functionally graded material subjected to the uniform external magnetic field and thermal field in plane strain state has been studied. Stress, strain and displacement field as a function of radial coordinates considering magneto-thermo-elasticity are derived analytically. According to the Maxwell electro-dynamic equations, Lorentz force in term of displacement is obtained in cylindrical coordinates. Also, symmetric temperature distribution along the thickness of hollow cylinder is obtained by solving Fourier heat transfer equation in cylindrical coordinates. Using equation of equilibrium and thermo-mechanical constitutive equations associated with Lorentz force, a second-order inhomogeneous differential equation in term of displacement is obtained and will be solved analytically. Except Poisson's ratio, other mechanical properties such as elasticity modulus, density, magnetic permeability coefficient, heat conduction coefficient and thermal expansion coefficient are assumed to vary through the thickness according to a power law. In results analysis, non-homogeneity parameter has been chosen arbitrary and inner and outer surface of cylinder are assumed to be rich metal and rich ceramic, respectively. The effect of rotation, thermal, magnetic field and non-homogeneity parameter of functionally graded material which indicates percentages of cylinder's constituents are studied on displacement, Von Mises equivalent stress and Von Mises equivalent strain fields.

• Women's Health Nursing
• /
• v.13 no.1
• /
• pp.43-50
• /
• 2007

Purpose: There is a need to apply the Tai Chi program to help early mastectomy patients improve their upper limb functions and for the emotional state as well. Method: Participants were recruited at breast cancer centers of two general hospitals from February 17 to April 25, 2005. Twenty-five subjects in the experimental group and 23 subjects in the control group participated for 12 weeks. The Tai chi program consisted of breast cancer self management education and a Tai Chi exercise program. Range of motion of the shoulder joint was determined by the Uni-level inclinometer, and functional assessment of the shoulder was evaluated with the tool. Data was analyzed by SPSS 11. Results: The experimental group had significantly increased shoulder range of motion, especially in external rotation, upper limb function and emotional state compared with the control group after program for 12 weeks. Conclusion: This program makes it possible to be independent and have a positive everyday life. In addition, it can help keep a healthy lifestyle in mastectomy women.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.296-302
• /
• 2020

The purpose of this study was to assess knee joint loading in the target knee during a golf swing compared to loading rates of high impact activities such as cutting and drop landings. Nine healthy competitive golfers completed golf swings with the target foot both straight and externally rotated 30 degrees, as well as drop landings and cutting maneuvers. Motion capture data was collected at 240 Hz and ground reaction force data was collected at 2400 Hz. The frontal and transverse knee moments were examined using repeated measures ANOVA through SPSS. The abduction moments were higher in golf swings as compared to the other high impact activities (p=.010), while the external rotation moments were lower (p=.003). There were no significant differences between externally rotated and neutral golf swings. These results suggest moments applied to the knee during a golf swing are similar to those applied during a high impact activity.